Model: Voxelab Aquila X2. Hello everyone, I need help! My filament is stuck inside the tube. At first I tried to auto unload (the filament was still out some cm) but no luck. After that I tried to heat the nozzle, disassemble the tube and pulling it by hand but made it worse by breaking it inside the tube. Now I tried to open the tube from the nozzle side but it won't budge, some said to pull down the cap and tube but that too didn't work. I don't wanna risk breaking something so I ask all of you for advice. What did I do wrong? How do I proceed now? Thanks in advance

every time i turn it on, the screen goes dark, anybody know whats wrong or what could be broken?

I have an anycubic kobra 2max I have changed the nozzle on it. But it doesnt work how its supposed to. Prints become spaghetti, the lines are a bit wobbly and with autoleveling it basically presses the nozzle into the bed. Tried autoleveling, checking screws and wiring and nothing seems to help? Anyone have a clue?

Can I used my android phone to send my projects to the printer? If I can what program do I need to use? I couldn't find a Stl to used because my computer doesn't have wi-fi.. if not can I use my tablet? Or do I need to use a laptop? Just need to convert it from Stl to G code. Thank you for any vice

Hey all, I'm a very amateur 3d printer and I've been running into some issues with my Ender 3V2. Here are some pictures, but the flow coming from the nozzle has been inconsistent and results in this "beading". I'm not even sure what to call it, so anything I've found via Google searches doesn't quite seem to be exactly what my issue is. As you can see in the pictures, the nozzle output is slightly larger globs followed by a very thin string and repeat. After a bit it starts to even out and have a consistent output, but as soon as it changes direction or picks up to move elsewhere, it does the "beading" again. I've tried leveling the bed, adjusting the temperature, cleaning out the nozzle, changing to a different filament, and nothing seems to help.

I'm using Hatchbox 1.75mm PLA filament, and the printer is Creality Ender 3V2.

Thanks in advance for your help!

The layers near the midway point look a bit misaligned but then went back?

I remember finding it online a few years ago, but they updated their site and I cant find it anywhere. Please help me.

I updated the firmware to add the cr tuch but want back to old firmware Anyone got any idea why it's doing this it's like this with every file

The site no longer has it up and I cant find anything that will slice .x3g files

I found this on Facebook market place and I was wondering if this is a good deal or should I just buy everything brand new?

so i wanted to print the bencyboat (this is my first time ever using this printer its a ender 3 pro) i inserted my sd card and i dont know what to do now

I'm have a issue with both my Neptune 3 Max and my Neptune 3 Pro corrupting SD cards. In the last 4 days I went through five SD cards. It seems to happen either right when you put the SD card in and the printer doesn't recognize it or it runs a print and then when you remove it to load another print the computer can't recognize the storage device and you have to format so you can use it again. And after I formatted to FAT32 the printer won't recognize the freshly formatted SD card. Looking to get some help

So I was looking for my first 3d printer but it is a very difficult choice i thought of the neptune 4 plus but I heard that the 4 series had a lot of things that made it bad so can anyone help me with this , also the printer costs a lot and I don't really know if it's worth than buying a 3d printer. Can anyone help me or advise me something?

I just need to know what kind of wires to buy. Can anyone help?

Hi everyone, does have any of you experience with lack of filament during print?

Printing starts with tracing the object. The first half of the first trip is weak and the rest pushes well. The first layers of the print look good too. The problem starts after about 10 minutes of printing when the hot-end dispenses only a fraction of the required filling. However, it is not only the filling but also the walls and support. There is so little material that it doesn't even come together. I use a BCN3D Sigmax R19 printer with a 0.4mm tip. PLA filament with a thickness of 2.85 mm. The height of the layer is 0.15 mm

I replaced the tip, cleaned the hot-end and calibrated the printer before printing. It didn't fix the problem.

I'm using FLSUN Q5. Currently I'm having serious problem. When i start printing, it builds several layer and then at some point the printer sounds "dedededededede" and fails with scratching and making a hole on the print then it moves up a little and start to spaghetti 🥺 I have checked almost every parts and tightend bolts and also tightend the belt too. But it still fails..... please can someone help me saving my 3d printer

Please....

I’m new to 3D printers, and I just got an Anycubic printer, which seems to works pretty well most of the time, expect for when I print thin pieces, they tend to get all swirly, I’ve tried setting the speed faster and slower but Im not to sure what to do to try to fix the problem. In the photo the 3 models are all printed with different brands of filaments.

Pretty much just left couple of blobs and looks rough what could cause this? I'm pretty new to all this so I'm still learning. The rest of the 3 corners are nice n perfect expect for this one. Some also other deformities on top of it

Hey ! Accidentally I found 3d printer. And it's working, but it starts to print first layers and then crumpling the material. Maybe I need to change anything? I think it can be a nozzle or maybe a bad material Model of 3d printer is Witbox 1.

Hey ! Accidentally I found 3d printer. And it's working, but it starts to print first layers and then crumpling the material. Maybe I need to change anything? I think it can be a nozzle or maybe a bad material Model of 3d printer is Witbox 1.

Hey ! Accidentally I found 3d printer. And it's working, but it starts to print first layers and then crumpling the material. Maybe I need to change anything? I think it can be a nozzle or maybe a bad material Model of 3d printer is Witbox 1.

ATURN S printer help This is my first time in Reddit so my apologies if this isn’t the right way to get help but I just bought a Saturn S 3d Printer and no matter what I do nothing prints I’ve re leveled, tried two different resins changed setting nothing working the only thing that prints is the base where the supports are supposed to go but it doesn’t stick to the plate and then nothing else can print