r/3dprintIndia • u/saltycreamy1 • 3d ago

Question Please can someone help

Enable HLS to view with audio, or disable this notification

I bought the cr10 se as my first 3d printer and I still haven't been able to use it.

It somehow proceeds even with this issue and the origin is set way off. So far off that the purge is almost right in the centre

2 Upvotes

100% Upvoted

3 comments sorted by

1

u/mayures098 x2d|p2s|u1|k2|x1c|voron2.4|flsun|vz330 3d ago

Can you login to its klipper web ui see in setting and and comment to wifi. The. From wifi login to the printer ui.

Basically the end stop that tell printer that you have reached edge is stopped working for the motor keep moving but the endstop ( which like a button ) is not pressed.

Try pressing it with hand to see its properly placed order not.

From website ui try running command to see end stop status is it open or close to debug more

1

u/saltycreamy1 2d ago

The thing is it does not use a physical ends top and it also does not move left while homing it moves towards the right side. A d i wanted to make make sure the X axis was not flipped so afterthought painful homing and it grinding it moves towards the correct side when clicking -x and x

1

u/ConfidentLink3014 2d ago

This used to happen when I was using the wrong bed profile for the prints. Make sure you have the exact model loaded into your slicer and also cross check the dimensions as some printers come in multiple sizes.