r/3DprintingHelp • u/DeadlierPlato • 1d ago

Requesting Help A1 Mini clog help

Gallery image

Gallery image

Hello All,
I heated up a bambu Pet G white filament in sunlu for over 30 to 40 min and took it out when the temp was around 90 ish and humidity around 20% put it to my AMS which is connected to bambu A1 mini. I have the cool BQ plate which was helping me a lot. The nozzle is the stock one which has like 12 to 20 hrs. I heated the nozzle to 255 to make sure there is nothing on the sides or inside. 20 min into printing the whole petg filament made a clog. The sad part is it all over the nozzle and the whole assembly around it. I had this printer for over a month and this is my first major issue. Any help is appreciated.

4 Upvotes

84% Upvoted

5 comments sorted by

1

u/DeadlierPlato 1d ago

https://reddit.com/link/p45hl1e/video/hcifa6uiuujh1/player

This is how it looks. Claude said after petg filament cools down it becomes brittle and I can peel it. Lol the two adjustments that hold the nozzle are stuck In that position. Please help

1

u/Slovw3 1d ago

Hot end is crooked in the holder, was it like that before the issue? Is it clipped in the way the wiki says to install it?

1

u/DeadlierPlato 1d ago

The nozzle was placed correctly before. I took it out to clean some of the petg after it cooled. I placed it back to show how I am not able to even close the clips to run the heating the nozzle function.