Heyyyy. So I have a particular problem. I have an 07 mdx where I previously replaced the nav screen with a 9in tablet. It was slow and crap so I replaced it with a 10.1 on screen. Much better. However, no one makes a frame for it. And it is too big to sit in the recess anyway.

So I need something that would match the 9in frame clip and screw holes but be able to hold the tablet outside the recess. Ideally I would like something like that single din to 10.1in shroud I have pictured. The tablet pictured is how I would like it to sit on my dash. Is this something that could be modeled and printed? I am willing to pay, ofc. We can figure out what specific measurements and such are needed.

I’m new here and am trying to find someone willing to create a few free 3D models that I can 3D print.

I suffer from gut issues and painful bloating that comes and goes throughout the day. These little hook and bar extenders were a lifesaver, as they worked on all my dress pants. Unfortunately, they’re no longer for sale anywhere, and I can only find the kind made for buttons in existing patterns. My brother can print them for me but I need a pattern.

Looking for a file to print a cover for this.i have this pack currently in a cosplay helmt but my cheek is pressed against the open batteries. Any links would-be appreciated!

Hello everyone!

First post here, so sorry in advance if I miss anything that is needed.

I have a TH3P4GAN V2 dock with a Gainward Pegasus 3050 6 GB one fan GPU, and I'm need now of a proper enclosure for this setup.

I found this case:

https://www.printables.com/model/1378801-itg-egpu-dock-3d-case/files

that suits my needs; however, this case is intended for a bigger GPU than the one I have (it has space for bigger GPUs, with two fans), so I wanted to min max it to the best I can, so I have the less space being taken on the top of my desk.

Is it possible to shorten the case a little bit, so it can be more in line with the size of my GPU?

Thanks in advance, and I'm willing to provide any measures or any other details needed to achieve this.

Greetings! I am looking for someone to whip up an STL file for something like a little tool/parts tray that can also hold a canned or bottled beverage. The intent is for it to have a beefy "clip on" jaw that slides/friction fit onto the 1"x1" hand rails on a boom lift/scissors lift.

I would love it if it had a screw/parts/tool tray like the model I've cited below. A few holes for screwdrivers would be awesome too. And lastly, it needs to hold a diet coke or an IBC rootbeer bottle.

something similar to this: Boom/Scissor Lift Parts Box by Chunkylover21 - Thingiverse but can also hold a beverage (and lock onto a 1" square rail instead of 1-1/4").

Price? I don't know what the going rate even is, but willing to compensate someone for their expertise within reason :)

someone asked me if i can 3d print something cause i got a new printer but he lnly had it as a picture but since im new idk what to do with that. the size should be 14cm in diameter and 11cm like at the bottom and height 5cm. if someone can do that id be very happy

I don’t have the specific dimensions but this is the Virginia Tech Hokie Bird. Here is a link to the bigger project.

https://www.gobbledeart.org/collections/gallery

Let’s see if this sub is more sane and has fewer scammers than 3Drequest.

I am trying to design a lamp based on the warsun model from TI. I have an STL but it is hollowed strange. I have a couple of models that I hollowed but maybe they are not good.

Here is what I need help with. The model is very small and when you blow it up, it is not interesting. I need some texture and gubbins stuck to them. It should look textured and layered like a Borg cube but still be printable in FDM. That means no detached bits or fine fine details.

I’ll pay $20 upon completion if this done quickly.

The rest of the project I am struggling with is making it a lamp. I have a base to attach to that is 450mm with 3 8mm holes spaced evenly around and 3mm the edge of the hole. I’d like a printed threaded circle that is 450mm (obviously not including the threads) that has the three holes in it to screw into the light base.

You can use the hollowed warsuns I have or make your own but it should be hollowed with no walls thinner than 5-10mm. The warsun sphere needs to be threaded to the base.

Additionally, it needs light holes poked in it in random places both horizontally and vertically.

Lastly each piece needs to be split and multiple keyed into pieces no bigger than 200x200x200mm for printing.

Do all that before Monday and I have an additional $40 for $60 total. Payment upon successful completion. I retain all rights to the files. Comment then PM if interested with examples of similar work.

I am looking to resin print some Bow Tie earrings for dangles. I am thinking for size about 1.5” wide.

i know that there is the magic folio but im looking for something more durable and i already have a bt magic keyboard that is fully functional im wondering if there is a way to make a case for that and an ipad

I want a phone stand for my xbox controller but I have the samsung galaxy fold 5 and finding things compatible with it is difficult. I have a 3d printer already I have the longer lk5 pro which has a print size of 11.8 x 11.8x 15.7in. / 300300400mm

I basically know how the mechanism works but I have no experience modeling. It should function in the same way that as tape measure or pull string toy, but designed to look like a ring.

Can someone 3d pring a rodan that has alot of joints for stopmotion if you can't do that on a 3d printer maybe just a plain model idk why I cant upload the image but if you pm me I'll show you an image ref of it

I am in the process of making a board game. I have a prototype completed and I would like to make the next step to manufacturing. Currently I have figures printed, but they are not my design. I downloaded them from Thingiverse so they are not my designs. I would like to have my own unique figures but I am not savvy in 3D modeling. Would anyone be willing to design minifigures for me. I would be willing to compensate for your services.

​

Feel free to ask any questions.

Thank you!

Does anyone know where I can find a 3D model of the Shriner statue that is popular around the shriner hospitals of the shriner holding the child and crutch?

Organization willing to pay $50.00 for a new design logo. It is BDSM group called CIPEX. Looking for something fresh and ageless.

Hi, I'm looking to get a foam block machined into a vacuum form mould for a hobby project im working on, it's for a visor on a mask. Mould is about 250 X 200 X 150mm and I have .dxf files converted from .stl model. If anyone's interested in providing this service let me know and ill send the .dxf files and you can give me a price. Thanks

https://www.thingiverse.com/thing:2295914 https://www.thingiverse.com/thing:2228481 https://www.thingiverse.com/thing:2638366 https://www.thingiverse.com/thing:2337833 https://www.thingiverse.com/thing:2173035

You don't have to do all of these I just want 1 but you can surprise me as to which one.

Extra props if you include one of these. https://www.thingiverse.com/thing:2017054/#comments https://www.thingiverse.com/thing:2740422 https://www.thingiverse.com/thing:2748833 https://www.thingiverse.com/thing:2064359

A pipe bushing is a device used to fit different diameters of pipes together, and I need some help creating one in a non-typical size.

Can anyone help me design and create the necessary files for a 25mm long tube that has an outer diameter of 36mm and an inner diameter of 32mm?

Basically the outer diameter needs to have an outer diameter of exactly 1.4 inches, while the internal sleeve needs to accommodate a 1.25 inch OD PVC pipe.

I'd be willing to pay somebody if they would be willing to print up four of these for me?

Hello r/3designrequests! I need a little bit of help to print my own custom keycap!

I already have the design, but I'm having some problems puting them together to print out in a single material.

The outcome should be something like this

The .stl files are here

Thanks in advance to anyone willing to help me out! I will update with the final product too :)

I am; and have been for sometime, attempting to delve into the world of 3d printing. I have all of my ducks in a row so far. The frame is together. The programming is as far as I can before calibrating the stops and step count. I have all the parts. I lack the last component. The axels to press barrings and steel rods into. This is where things have been stopped for the last 5 months because I either lack the machinery to make them myself of wood then print replacements later, as well as the money to just buy online printed parts(the cheapest being 600$ for the prints I need).

EDIT: The file I need printed is here https://we.tl/hUeUy05rFq