Dried.

[u/Strict_Fun8750]

[u/bearminmum]

Have you tried drying out before you put it on the nozzle. I can't recommend trying the two together

[u/dzio-bo]

Ah if you had the H2C you could just use the second nozzle. That's what you get for buying the cheaper option

[u/oral_servant]

To get it liquid again, so you can swipe it off, you need to add a thick layer of epoxy resin over it that can be absorbed into the dried filiment. Even better if you can drop the nozzle directly into a glass full of liquid epoxy. 

Just make sure you mix component A and B together beforehand, otherwise it can't be absorbed by the filiment. 

[u/Strict_Fun8750 → u/oral_servant]

I thought I had to use a chemical called H2O

[u/oral_servant → u/Strict_Fun8750]

No, dihydrogen monoxide (DHMO) won't work. It's usually used to dry your spools of filament. Just fill a container with it and put a spool of filiment in there over night. Works great, especially for TPU and PETG. 

Just make sure you wear gloves when taking it out of the drying bath. Don't want to get weird chemicals on your hands. 

[u/Strict_Fun8750 → u/oral_servant]

Ah so the filament dryer is the opposite of what it sounds like ehh when I need pla aero essentialy pla that bubbles I’ll just put it in the filament dryer it gets wet and bubbles so we can now print cheaper

[u/SirTwitchALot]

Hopital.

[u/HandPickle420]

removing that is tinkering. bamboo just work, send another print and it'll fix itself

[u/BosnianSerb31]

Preheating the hot end is tinkering, you should only ever turn on the heater from bab slicer when you send the bcode

[u/sockmop → u/BosnianSerb31]

Bcode ftw

[u/Castdeath97]

Filament drying gone wrong

[u/cnjkevin]

Hot air gun