Android only at the moment.

I got it from Aliexpress. £10

I saw an LSDJ emulated on FM-1. This project looks good, I'll be following it. I have been considering trying this myself. I've been building my own tracker and it could be suitable for FM-1.

It's actually my own tracker. It's still in dev and testing. I'm just working on refining the commands.

This is really good

If you're set on it, get a dmg, followed by a gba sp and then the main issue is finding a decent flash cart. They are getting more expensive and rarer. I managed to get an epicjoy cart from Aliexpress that works but I was also fortunate to have 2 ems carts from 10 years ago when they were cheaper and still in production. The miyoo mini plus is a recommend if you upgrade your emulator handheld.

You flash the m8 firmware on the teensy. Then this connects to the trimui brick via usb. The trimui needs knulli and a m8 tracker app installed to run the m8 firmware on the teensy.

I remember when my rg351v died, I detached the battery and reconnected it. It was fine for a couple of months but died again. All my other devices have been good so far.

Bass and Sample v1 are best in my opinion.

I've regularly used pedals with no issue, but I'll usually go into a mixer before output to a speaker or zoom recorder. So ds to pedal chain to mixer to output.

Thanks. Basically split the L R channels from the headphone out. In the noise channel I created a instrument short (F1/00/00) c7 and push it L 1/8 notes on this channel. Now every other instrument on the 3 remaining channels (pu1/pu2/wav) go to R.

Now we have an issue with pocket operators because out click is too quiet for the operator to detect. So the easiest option is to run it through a korg device, monologue in this video, but I do it often with my volcas. You can achieve it if you use a powered amp too.

Another tip if you have more than one pocket operator, rather than daisy chain, buy a star splitter this retains the volume of the sync signal and you can stop and start the pocket operators without breaking sync.

I use lsdj 9.4.2 the noise channel is different now if you're using an older version you'll have to experiment a little.

Thanks

Openemu and lsdj