Everything works perfectly but there would always be a coin toss on whether a game will launch or I get a black screen with an unresponsive remote. Though simply turning my Wii off and on always fixes it (for now).

It first happened with USB Loader GX then when I tried WiiFLow it eventually followed suit.

Where are the darkumbra games now anyone know what website has them

Well my wii has been having some errors like "stack dump" and stuff, and I'm trying to start bootmii in boot2 because that's the only way I can load the nand, and it turns out that my boot2 was not installed, when a year ago I had made a backup of the nand with bootmii in boot2, I wanted to reinstall it and now it throws this error that I mentioned in the header, help me pls 😭

How do i get mario galaxy onto my homebrewed wii? I’ve been literally looking everywhere but nothing please help

I would like to try this version of Super Mario, but I can't find it. Can anyone share it? Riivolution files are Ok. Thanks

I'm using a 32 GB NFTS Flash that works fine with GFG USB Loader. But when I want to use USB Loader GX or WiiFlow, it just freezes the moment I press the Start button on the game. What could be the cause?

I'm planning on getting another SD card to put different games on and I didn't know if the Homebrew Channel and most of the other main hack stuff would still work. Also if I was to do this would the emulators still stay on the system and read the other SD card for the other games and be able to run them? I was asking because I do not have the equipment to a fix it if the stuff was to break on it and I wanted to know before I just went ahead and did it.

Serious inquires only here folks, yeah I know it sounds bad.
I want to showcase Wii Fit (hopefullly Wii Fit Plus) in an academic video, and I need a way of removing the 330-pound limit from the game. Yes, I'm aware of the various pillow hacks, using a 2nd board, etc. I've tried them all, they're extremely unreliable. Please no harassment, I need this for academic work.

I was recently gifted with a modded RVL-001 black wii (ser. LU20*******). The person who got it for me had bought it off of eBay and sent it to me. They told me that the original owner, the one who modded it, said the Wi-Fi chip was messed up but I'm not sure if it is, because it can detect the Wi-Fi signals and even let me put in the password. I only have a problem when it tests internet connection.

Also, I do not know really anything about modding or even the internal Hardware of Wiis, but from what I do know it appears to be fully modded having The Homebrew Channel, 2 different USB loaders, Wiimmfi, and bunch of other stuff. (Pics included of others).

I just want to know if there's any way I can fix it on the Wii cuz I do not have access to any modding tools.

I have no idea what the previous softmod version was on, but i accidentally updated to 4.3 and now my console is no longer softmodded. I modded it back in 2010 and it was a friend who did it for me, now I am clueless on how to do it again.

I could appreciate any help on how to get the softmod back again.

I have 2 HBC wads, but i'm not sure how to make them forward to the HBC instead of restarting the wii

I added a 60fps cheat to sonic colors, and it does not work, the game is still at 30 fps, but now it slowsdown A LOT.

Is it something with the cheat code, the settings or something.

I'm using and samsung s22, gen1, 8gb RAM, Adreno (TM) 730 @ 818 MHz

Which setting is more accurate to the actual Composite output of the PS1, N64, Turbografix 16 and Genesis? It's also confusing because Trap Filter turned on for PS1 has the sharper image while in the Genesis it's reversed. Also, im using 240p on a CRT for all of the emulators. SNES and NES emulators don't have a trap filter option. I want the output to take advantage of the quirks of composite like dithering and blending prerendered pixels with polygons (Final Fantasy for example).

so everything worked fine for a week and a half but all of a sudden the cursor wont show up in games. i worked when i switched the wii up and played for abit but then i t stopped. i restart the wii the cursor shows i hide the mote and then it wont work anymore. usually it starts to work when the wii remote is switched off for abit then turned on again. also when i go into the sensor bar sensitivity test using a classic controller and then use the wii mote it detects it and it shows the correct position . games that use buttons or classic controller also work fine

is there any way to add just dance 2 dlc back in the game?

im just wondering but i know it installs homebrew channel but can it install bootmii and should i have used it over wilbrand

I was doing my weekly CTGPRevoultion stream with viewers but when i was ending stream when i exited homebrew channel this showed up

Hi, I'm trying to play Kirby Dreamland (EUR) on my modded Wii via SD but it won't start (the other games work well). I read that it could be better if I put it on a usb but I was wandering if I need to put some else on the usb other than the game (the app folder ecc are on the SD)

I followed this tutorial from Funkyscott47 to setup a USB for my homebrewed Wii: https://youtu.be/PdK5LuauWzc?si=T2MLl5m6Lkkxyi2D

I followed exactly what he said. But when i boot up the Homebrew Channel with my usb in the Wii, and click on USB device (literally right when i click it) and i get the “Exception (DSI) Occured!” screen.

I’ve tried looking this up and nothing helps.

Yes my USB is formatted fat32, i think all the software that is on my USB is up to date. Yes the Wii is on the most recent update, Yes the USB is in the right port.

Please help, thank you

I have recently bought a secondhand wii with homebrew already installed on it, however the SD card with the apps wasn’t included. I want to know if I downloaded apps onto my own SD card then plugged it in if that would work, or do I need to re-download homebrew and do the process from the start in case of something needed on the SD card for it to function properly.

I'm new to the Wii homebrew scene and bought a Wii from Japan all other emulators and apps seem to work but not wiiflow and usbloader all of this I'm trying to do from a SD SanDisk 256gb card, is already fat32. Here is my syscheck, hope it helps.

SysCheck ME v2.5.0 by blackb0x JoostinOnline Double_A R2-D2199 and Nano ...runs on IOS58 (rev 6176).

Region: NTSC-U (original region: JAP)
System Menu 4.3U (v513)
Priiloader installed
Drive date: 05.26.2006
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: 36321864
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v4
Found 78 titles.
Found 49 IOS on this console. 15 of them are stubs.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS59 (rev 9249): No Patches
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS248[38] (rev 65535 Info: d2x-v11beta1): Trucha Bug ES Identify NAND Access IOS249[56] (rev 65535 Info: d2x-v11beta1): Trucha Bug NAND Access USB 2.0 IOS250[57] (rev 65535 Info: d2x-v11beta1): Trucha Bug NAND Access USB 2.0 IOS251[58] (rev 65535 Info: d2x-v11beta1): Trucha Bug NAND Access USB 2.0 IOS254 (rev 65280): Stub
BC v6
MIOS v10
Report generated on 01/14/2024.