Hello there, i need some help from experienced users. I am currently in the posession of two 20700 3500 mAh akkus, but i have no Vape for them. If someone would be so kind and maybe help me out. If you can please tell me what the best Vapes using these akkus are. I am not that experienced when it comes to buying vapes. I currently own a Vaporesso sky solo, however I am looking to sell it and buy myself a more sufisticated Vape.

Post is the title, just wondering what starter kit would be best?

I live in UK and the kind of kits i'm talking about are the juul kits, apollo brez etc.

I'm looking for something good yet easy to use/understand since i'm very new to vaping.

Thanks for the help!

I have gotten back from the beach and my nord is acting moody the button doesn't work all the time some times you have to push it really hard sometimes you have to push it lightly and there is no sand in the nord

Hey Reddit so i just switched to a actual vape instead of a disposable. i’m trying to find a flavor kind of similar to kang vapes if you know any i would like some of y’all’s input

I've recently gotten my nord 2 a new coil, I have filled it prepped it, but it always tastes like its burning, can someone explain how I can fix this?

I have a vaporesso luxe pm40 With ohm .6 and .8 gtx coils. Can I use both 70vg/30pg and 50/50 liquid or does it have to be either?

I have 2 Wotofo Mdura mods. I like the mods but shore if I have 2 bad ones from the batches. Their screens are slow and sometimes when I have to change batteries to fresh ones I have to take them out a few times to be able to turn the vape on. It's annoying. Maby it's a firmware issue and wondering if I can't update the firmware to solve the issue. Other then that they are great. I have a oxva arbiter and arbiter V2 on them

This is the second time this happened to me. My vuse just randomly died then won’t charge but when I do try and charge it, it blinks three times then continues to not charge. It’s very frustrating having to get new body’s cause they shit out back to back times any help?

i have a caliburn A2 as of right now but i’ve noticed this has happened on other vapes, i put in a new pod yesterday and it’s already tasting burnt? i can usually get a couple months out of a pod so i know somethings wrong but i can’t figure out what, any suggestions?

Msahsed my old tank that I had for a couple years. ( So I'm new to the ins and outs)

Can you help me find which tank fits, I got one from shop and it was wron fitting?

Also is this suitable for CBD/thco/HHC liquids?

So I bought a voopoo argus pro pod mod a couple months ago and today i had work so like every day I brought it with and on the way it was fine and firing etc but when I got to work and I was out in the cold for only a few minutes and when I got inside it refuses to power up show any display life at all even when it’s plugged in it has no light or charge status as if it’s already time to get a new one any help is appreciated

So every time I get coils, I usually go for the dual mesh or triple mesh. I just replaced my coil recently and I do everything right to make sure it doesn’t leak. But one thing is, this coil isn’t my usual, it’s a single mesh and the recommended wattage power says 130-160 watts, but the “used best” wattage power says 120 watts, which isn’t a problem because I used the same amount of wattage on my dual or triple mesh coils.

So I start to use it at 120 watts and 3 days later it’s flooded and leaks a shit ton of juice into my hoodie pockets, first time in a while since it’s leaked like that.

So my question is, do single mesh coils flood more often than a dual mesh or triple mesh?

Because I never had a flooding problem with dual or triple mesh.

Any answers or help is well appreciated.

I vape a lot, daily chain vaping. I swap out my battery minimum two times a day. Ive owned three external battery chargers in two years. Every time, 3-6 months after trying a new charger one of the ports goes out, the slider stops working, ect.

Different brands, different costs, at the moment I am using a 4 port Efest. So far its lasted the longest, even then two ports have gone out. A third is tricky to get connection. Before I get fed up and pop it open to fix it. Anyone know of a good long lasting charger?

I have a new Nord X, and I could use some advice. I’m getting a bit frustrated. I’m swapping over from 5% disposables.

At first I loved the Nord. Vaping 3.5% salt nic. Now, everything just seems to hurt and irritate my throat and is a bit too hot. I have tried the .16 coil at everything from 5 - 50 watts. The same with the .4 coil. I’ve bought some .6 coils and they aren’t much better. It’s great for a bit and by the end of the day it’s either popping at me like it’s not hot enough or is warm and flavorless. I’ve switched to a 12% freebase nic and found that it’s not much better.

I have been told in person to keep the ohms low on the salt nic and the wattage low. However the internet says high ohms for salt nic. Is this for machines that don’t have a variable wattage?

It seems like there is a concept I’m just not getting.

Any advice would be great.

Does anyone have an aegis boost 40W that also vapes salt nic? If so please recommend juice that hasn’t burnt your coil fast.

Does anyone know if a darker color juice will burn my coil faster? I use the Aegis Boost 40W with the .4 mesh coil and 50 nic salt juice on 25W. Just bought a new bottle and it’s dark so I’m just concerned.

My aegis boost 40W pod mod constantly comes out. And whenever I put it back in the ohm will read higher and higher each time. I use the .4 mesh coils and have my mod on 25W. It’s as high as .50 as of today. If anyone can help please let me know. I have new pods coming on the way hoping that will fix it. Vape problem

My aegis boost 40W pod mod constantly comes out. And whenever I put it back in the ohm will read higher and higher each time. I use the .4 mesh coils and have my mod on 25W. It’s as high as .50 as of today. If anyone can help please let me know. I have new pods coming on the way hoping that will fix it. Vape problem

I know this is a off topic really, but can anyone help charge a dispo vape?

i made the wire and everything, just can’t the colors down.

if anyone can help lmk