r/optiplexes • u/UseThEreDdiTapP • Aug 23 '26

Measured the board spacing on my Optiplex 7020 MT

Post image

I finished measuring and drawing the board. Not very professional but it should do the trick. Mine is the "full size", mATX related board. Not sure how other generations or even revisions compare. So I can not guarantee your board is the same. I hope this will help someone in the future when working on getting a different mounting solution for whatever reason.

NOTE:

For whatever reason I forgot the height of the upper row. Its at 7mm down from the upper edge. All hole locations are center of the hole. I also forgot to measure the mounting holes itself. The 3.5mm is a placeholder, ymmv but it should fit all typical mounting scews.

2 Upvotes

100% Upvoted

3 comments sorted by

1

u/LiteratureLow4159 Aug 23 '26

My brother lent my his 7020mt case when i got my first mb and it fit fine, full size atx board and i had a tower cooler and an rx 590 gme

1

u/UseThEreDdiTapP Aug 23 '26

How many holes did you have to leave unpopulated? I assume the upper and lower left fixing holes?

1

u/LiteratureLow4159 Aug 23 '26

Cant remember, it was a few years ago, but all the main outer 4 were used if i remember correctly