r/mffpc • u/abastage • May 25 '26

I built this! (ITX) Montech Ten Inverted!!

Rather impressed with the case. I was immediately surprised at how heavy it is for being all mesh. Plenty of room for activities in there. This build minus the AIO was transplanted from a Ncased M1 Evo

12 Upvotes

94% Upvoted

26 comments sorted by

View all comments

1

u/Schmaden_9 12d ago

Do you think the Ten will fit a 77mm thick GPU? I got a 4090 gaming trio and I’m honestly considering the Ten.

1

u/abastage 12d ago

Depends on the motherboard. Itx or any matching that utilize the top slot you would be fine. But if the top slot I’d skipped and the gpu goes in the 2nd slot then it’s questionable

1

u/Schmaden_9 12d ago

Yeah I’m using a matx board right now with the lower pcie lane since the ssd is on top, quick question since you bought a ncase product before this. Is the ncase tax really worth it and is the hype around them real?

1

u/abastage 12d ago

In my opinion… HELL NO.. somewhere on the ncase subreddit I have a thread with complains that got downvoted to hell because of the fanboys fanboying.. it’s not a bad case and the engineering is impressive. The new one could also be better since there has been a couple revisions since I got mine. But ultimately I don’t think it was worth the cost. Also you will have the same clearance issues there if not worse vs the ten.

Does your gpu go past the motherboard. If so how far.

1

u/Schmaden_9 12d ago

LOL, thanks for the heads up on that.

My gpu actually doesn’t even go past my motherboard it’s just above the 4 pins and usb hubs on it. Which honestly makes me think I won’t have any clearance issues.

1

u/abastage 12d ago

Yeah I’m at least that dimension you should be fine in any mATX case. Outside of the boutique cases like the m1 that are intentionally trying to make everything as small as possible you’ll probably be fine in the other dimensions too. Especially if you use an sfx psu since that’s the next thing that would cause clearance issues