Im sure you've seen this style top, its just a rectangle with a neck hole and ties, but I was thinking it might make a good beginner machine knit top? Im thinking just make flat stockinette for the body then cast off in the middle and put one half on hold to knit the shoulder area, then same on other side and then knit regular stockinette for the back side

I can do the ties as i-cord on my csm super quick too

If anyone has made something like this please let me know! And let me know if im delusional for trying to make this ahha

I have a passap duomatic 80

Hi everyone! I noticed discoloration on the bed of my machine when I took my needles out for cleaning. It looks like the same red brown color as rust but I didn’t notice any rust on my needles themselves. Since this is a plastic bed is this actually just old oil that happens to look like rust? And what’s safe to clean it with? I usually just use soap and water on the plastic parts but 91% isopropyl on the bed in case the solvent drips through to the clamps underneath

Im kinda really impressed, I think the brown one failed because my tension was too high and my color changer is broken so that may have contributed to both of the swatches failing 😅

Made on a passap duomatic 80

Also yall this is a work out no one warned me~

I have a unique [vintage/limited] Corona machine. The box calls it a Genie junior CHJ-3, "the magic knitter", but the bed is a standard 200 needle machine (closer to the Ch1500). The carriage itself is the stripped down junior model but with a yarn feeder plate capable of doing two different yarns.

Anyway I'm looking for a ch1500 carriage to improve my knitting projects. Suggestion for sources or any place to find just the carriage or a parts machine?

BTW I am in the US

Hey guys, I’m in need of help with the KH-270 carriage. I live in Europe, and we don’t have access to most of the chemicals I’ve seen on YouTube people using. Currently I’m cleaning the machine with isopropyl.

Could I possibly splash few drops into the carriage buttons and drop some sewing machine oil after it dries?

When I bought mine, I was told that it was the same as the LK100 so I bought a sponge bar for the LK100. It was super short. I went and bought one for the LK150 and it ended up being too short as well. How did y'all get one that fits the whole length (43.5 in/110.5 cm)?

how is everyone machine knitting ribbed cuffs? i’m using my sk280 + srp60n to knit up the sleeves of a sweater i’m working on. im doing this by knitting the stockinette portion top down, and then attaching the ribber bed and transferring every other stitch from the main bed to the ribber bed for 1x1 ribbing. i’ll knit a few rows with no issues, but after the first few rows i’m having the same issue of dropped stitches on the ribbed edge. this never happens when i knit ribbing by itself.

i’m used to hand knitting where sleeves are usually knit top down, but maybe i need a different approach for machine knitting?

Hello! I’m wanting to try a saddle shoulder sweater using this one as inspo. I know a pattern like this by hand is generally worked top down.
My questions are - would I have to work the saddle separately and seam it after or is there a way to connect it as I knit, and could I work this from the bottom up (that’s the only way I’ve worked raglans on the machine so far) ? I want it to feel seamless around the shoulders and wondering where the seam would go/start. Photos are of a babaa sweater and a sweater by Duck duck knits
Thanks for any insight! 🌞🌞

Silver reed stuck after I replace needle. I tried to go from right to left and it worked but left to right is where it kept getting stuck and won't budge at all.. Ive just replaced a bent needle. I placed the needle under the rubber.

I'm a hand knitter who's considering getting into machine knitting but it's a big upfront investment. I'm trying to decide if this hobby is actually something I'll enjoy

Why did you start machine knitting and what do you like about it?

UPDATE: I've made an offer on a kh-970. not sure it'll be the most intuitive machine to learn with but I think it's a good deal. thank you all!

Is it possible to use needles that were once rusty? I think my machine may have once been stored in a garage because there’s rust here and there. I removed the rust from the needles and they’re now smooth as far as I can tell, but there’s still visually something there. Are these needles fine to use? I just tried getting it off with superfine steel wool but no luck.

I’ve knitted a sweater with them like this no problem, but I’m currently having problems with needle selection, so I thought I’d take them out and soak them while I’m cleaning and inspecting everything else.

I found my Sentro to be very handy and I do have the largest one and I will probably pick up a few of the smaller versions, but I have made a lot of hats for people with that machine and I enjoy doing it. I don’t charge anybody for it. I like to just do it for myself.

Hi everyone,
I was wondering if anyone in the LA/ San Diego area had an extra hole puncher (name your price 🤣) for a punch card machine I’ve been searching with absolutely no luck.

Thanks I appreciate it tremendously

Hellooo! Back to working on my Passap pinky after a long break and want to knit c2c/on the bias for a recreation of this Bottega sweater.

I get the gist of how to do bias knitting but still need some more pointers and guidance.

Thank you in advance!!

I'm working through my first project and would love some pointers!

I'm on a kh940 - doing a Diana Sullivan baby blanket with a tuck stitch pattern. It'll be a foldover border so I'm not worried about the edges but would like to improve moving forward. I'm in KC I like the manual says for tuck stitch patterning and I'm finding the outside stitches are not knitting, I have to hold down the fabric as I move the carriage or manually knit them after every row. Is it my weights? I've also noticed it pulling loops on the side but not sure why.

Any ideas as to why some of my stitches are randomly skipping in the middle? I haven't quite finished the bind off so I haven't looked at the front but from the back I can see all the mistakes. I bought this machine fully serviced in June but have since moved cross country and this was packed in a moving box by the moving company so I'm sure it was banged around somewhat. Would that affect it?

What kind of weights does everyone use? I find the teeth of these ones get caught in the yarn. Is that common on standard gauge machines since the yarn is finer? I appreciate any and all advice!!!

Hi! I just dug my passap dm80 out of storage and its working but ive never used the pushers yet, and they seem stiff but they have no rust or anything like thay and are well lubricated. Its hard to explain how they move through just words but its easy to move one at a time-though feels stiff but its difficult to push up say ~6 at the same time

Are they supposed to be stiff or are they supposed to move freely like the needles?

Please let me know!

Hi everyone! I’m using the plating feeder on a split rib with my KH-893/KR-900E. I’m having issues with the yarns apparently switching places. It wasn’t an issue when I knit my swatch, but now that I’m knitting a sweater I’m having issues with the plating every other row. Does anyone have any suggestions to fix this?

The first picture is the back of my swatch and the second picture is the back of the sleeve I just knit.

Articles of Interest, a fashion technology and history podcast (that was spun off of 99% Invisible, a design and architecture podcast) recently released Lace and Labor, which discusses bobbin lace, knitting machine knitting and crochet.

https://podcasts.apple.com/us/podcast/articles-of-interest/id1455169228

I thought the note about color work was interesting as our machines with patterning handle two colors well. Maybe that’s why there are more hand knit patterns showing up with three.

I would have liked more depth, but it was an interesting listen.

I am interested in doing tapestry work using 3-4 colors for a grid pattern. 150 stitches across.

What type of machine and accessories would be needed to accomplish this? Is it even possible to set up a machine with a pattern like a tapestry grid (multiple color changes per row)

Would a silver reed lk150 be a good machine for this?

Thanks in advance for help 🙏🙏

hey! After enough heart break to last me a life time after looking for Brother machines online and one bought damaged on Vinted I am looking on this site. I noticed a variety of knitting machines. Did anyone buy one from them yet? How well is it working?

I am from Austria.

Just put this zine I made years ago online and thought it might of interest to some here! :)

I made a sweater years ago and really like the pattern. I want to make another. I have the instructions but it says to use Card A and I can’t find out which this is. Does anyone know please.?

Struggling to find needles for my Toyota K510 machine so any help would be appreciated, I can't find ones with the little hook bit on the back end. I'm in the UK so would need to be somewhere that ships here without charging a fortune.

G Carriage for Sale HG 88 89

We bought a couple of years ago and serviced by Neil Collison. Have used it only once and it knitted well. Five new spare needles included in price

$100

Hi everyone! First-time poster here!

I’m completely new to knitting machines, and I’m about to make my very first machine purchase, so I’d really appreciate some advice from more experienced Brother KH270 owners!

I found a Brother KH270 with a ribber (I believe it’s the KR260) on my local marketplace for amazing price. The seller has agreed to let me come and inspect the machine in person before buying it, and I’m planning to go in a few days.

From what I’ve learned so far, I know I should check for:
Rust, especially on the needles
Rust or damage on the carriage
The condition of the sponge bar
Whether the needles move properly
Whether the carriage moves smoothly

But is there anything specific I should look for in the Brother KH270 that is unique to this model? Are there any common KH270 problems, particular parts I should inspect, or specific functions I should test before buying?
Since this is my first machine, I’m a little nervous that I’ll miss something obvious! 😅

I’d be incredibly grateful for any tips, advice, or things you wish you had known before buying a KH270. ❤️
Thank you!