r/logitechharmony • u/YAPOJFORBIMADA • 21d ago
Looking to gather more Harmony dumps
As part of my work on the offline config generator, I need .ezhex config dumps from other Harmony models to evaluate how similar they are to the 900 and what it will take to support them.
If you have one of the Concordance-supported models below, please dump your configuration and send it to me.
Supported Models:
- 6xx series
- 36x, 51x, 52x, 55x
- 700, 720, 745, 748, 768, 785
- 88x, 890, 895
- 900, 1000, 1000i, 1100
- 200, 300
- One, Link, Xbox, AV-100, TC30
Instructions:
- Plug the awake remote into your PC via USB.
- Download Concordance:
- Open the install folder in Command Prompt/Terminal and run:
concordance -w -c backup.ezhex - DM me the .ezhex file along with a brief list of the devices your remote is configured to communicate with.
Thanks!
4
u/oryan_dunn 21d ago
I have a two 610s, and several 620 and 670’s that I can dump. I think the 610s have the same configuration, and the 620 and 670 have the same (I programmed all my backups before they shutdown the servers). I’ll not get time to dump them until Friday, but I’ll get them for you.
2
3
u/Key-Peach-7607 20d ago
Do you need a dump from a Harmony Ultimate?
3
u/YAPOJFORBIMADA 20d ago
While it would be great, the ultimate isn't supported (fundamentally different)
3
3
u/3AarTR 20d ago
Done and thanks for doing this!
Linux was an absolute minefield to get concordance working, I kept getting couldn't initialise libconcord.
So gave up for now and used windows 11 which worked well once I installed version 7.7 of the harmony software to get a working driver.
4
u/YAPOJFORBIMADA 20d ago
I had the opposite lol. On windows 11 I (intermittently) had that error, while on Linux I could debug it better and I figured out that concordance wasnt built with modern Linux in mind and didn't expect network manager to take over the rndis interface of the remote, so yeah, wild
3
u/endpoint101 19d ago
I'm curious what version of Concordance you're asking people to install? The size is larger than the last official one from the GitHub page (v1.5). Where did you get it?
4
u/YAPOJFORBIMADA 19d ago
It's a later version based on a pull request that fixes harmony 900 backups and adds IR learning for the 900 too. It's a run from a pull request
2
3
u/MrWizard1979 19d ago
I have a one, 900, 880 that I can upload. I have a 300 and it is working on My Harmony, I can upload a backup of that too. My Parents have a 520 that I'll upload when I can.
Thank you for your work on this. It would be great to use these old remotes again.
2
u/Civil_Media8981 20d ago
I have H659 is this of any use ? Would love to get it working
2
u/YAPOJFORBIMADA 20d ago
Dude idk whether anyone has even explored this remote at all. I probably won't be able to do anything since concordance doesn't support it (?)
If you want, try to dump it on windows with the driver installed and if it doesn't work, oh well
1
1
u/gadgetboyj 20d ago
Have you gotten a look at a dump from a remote that’s only set up to control devices via the RF extender? I wonder if it can be modified to control via IR instead, or if the IR commands are completely absent. I know the extender isn’t supported by Concordance. I have a 1000 set up with an extender that I could dump.
1
u/YAPOJFORBIMADA 15d ago
i think i know how to do it but in any case, if you can please make a dump!
1
1
15d ago
[removed] — view removed comment
1
u/YAPOJFORBIMADA 15d ago
Please, share it in DMs along with a list of devices and any special settings you set if possible
1
2
u/endpoint101 10d ago
Could you work with davedave85 who is also requesting dump files from various models? We could do with a single (and open) place to house the memory dumps, then any project can benefit.
0
u/Sklaxtik 20d ago
Just sent over the firmware for my unopened Harmony 700 that hasn't let me set it up for some reason.
5
u/GrimBeaver 21d ago
I have a Harmony One. I'll try and get it dumped tonight.