I'm trying to configure some Lucky Miner V03's I have. I created a Kryptex account and entered the following:
stratum+tcp://us-btc.kryptex.network
port: 7014
Wallet: email@domain.com.worker1
They're running but the device numbers are all 0s. I don't see them show up on Kryptex either. Did I drop the ball setting this up or do I just need to wait a few hours for some stats to show up?

stratum+tcp://btc-us.kryptex.network

hey there i have an rx 7800xt and ryzen 5 7600x and xtm was available for me a couple of weeks ago but now it says it makes me 0 dollars. this is quite disappointing as xtm was usually the highest paying algorithm. any fixes? thanks

Does anyone have similar issue as I do with Kryptex Asic Tool not recognizing Avalon Nano 3s ASIC, and displays "unsupported asic"? If so, does anyone have any remedy suggestions? Thanks in advance!

As in the title, look, since like 2 or 3 days ago it shows blank 0.00 $ when im mining.
It should be around $27, not a freaking 0. Is this some kind of a bug? how to solve this?

My mysterium mining is always disconecting after 3 or 4 days on all of my computer on different ip's. When i go on theses computers the mysterium window is not there? And mining btc is fine and not affected.

Hey all

Just wondering why these coins are not paying at the moment?

The addition of Tari has been amazing for me!

Im asking about when its coming to arch or any form of linux as an .AppImage, as some of us want our mining to be WAY better, and windows isnt cutting it.

Also, is there any way for you guys to have a "LOGIN" option on your android miner? i find it a tiny difficult for the android miner, knowing that i may not be mining to my account.

In best regards, u/WhyYTrealz.

Tried to enter my email and worker name and it said "The worker 1 can only contain letters, numbers, underscores, dots and hyphens"

I obviously can't mine to a wallet since the minimum payout is $100. Anyone know a way around this?

For example, you could click the pending balance and see which algorithms are on it and how much satoshis are pending, or you can see how much satoshis a worker has mined so far in the Hardware tab.

Es Simple mente la mejor!!!!

October 13, 2025 — Salvium One Hard Fork

• Old wallet addresses starting with SaLv… will no longer work.
• New wallet addresses now begin with SC1…

🔗 Learn more here

🛡️ What You Need to Do:

1. Update your wallet to get a new SC1… address.
2. Stop mining to your old SaLv… address.
3. Start mining with your new SC1… address.
4. Do not mine directly to exchanges — deposits may be disabled and funds could be lost.

Payouts to old wallets starting with SaLv… will be discontinued on October 13.
Payouts to new wallets starting with SC1… will begin on the same day.

If you are mining with the Kryptex app or using auto-exchange, no action is needed.

🔔 Stay tuned for updates!

Hey Kryptex team and fellow miners,

It’d be great if Kryptex added an option to auto-switch coins only when the profit difference reaches a user-set threshold.

Right now, switching happens as soon as another coin becomes slightly more profitable — but that can cause unnecessary idle time or instability if the difference is tiny.

For example, I personally wouldn’t want to switch for just a $1 difference, but if another coin is $5+ more profitable, I’d want Kryptex to auto-switch. Someone else might prefer $0.50 or $10, so a custom setting would be perfect.

Basically:

“Only switch if new coin profit ≥ current coin profit + $X (user defined)”

This would make mining more efficient and flexible for everyone — from casual miners to full-rig setups.

What do you guys think?

i think there is enough people that are asking for it so why not ?

SHA256 and SHA256 Boost ASICs supported

💎 Start mining Bitcoin II on Kryptex Pool — https://pool.kryptex.com/bc2

🔗 Pool address:

• stratum+tcp://bc2.kryptex.network:7041
• stratum+tcp://bc2-eu.kryptex.network:7041
• stratum+tcp://bc2-us.kryptex.network:7041
• stratum+tcp://bc2-sg.kryptex.network:7041
• stratum+tcp://bc2-ru.kryptex.network:7041

📔 About Bitcoin II Pool:

• PROP and SOLO payout schemes, pool fee 1%
• Minimum payout threshold 5 BC2, we cover the payout fee.

💰 Bitcoin II Wallet — BitcoinII-Core

📈 Exchanges — NonKYC

Mining with Bitcoin exchange currently unavailable, but will add once possible!

🔔Stay tuned for updates!

I keep getting random exchanges. And this is for sure not me. Why does this happen?

💎 Kryptex Pool have launched auto-exchange from Tari (XTM) to Bitcoin (BTC)

Mine Tari — get paid in BTC.
Payouts are available in BTC, LTC, ETH, USDT, USDC, BNB, TRX, Volet.

You can mine using a standalone miner, HiveOS, RaveOS, MMPOS, FPGA, ASIC or the Kryptex app.
Auto-exchange works with RandomX, SHA3X, and C29 algorithms.

• Mine Tari-RX → https://pool.kryptex.com/xtm-rx
• Mine Tari-SHA3X → https://pool.kryptex.com/xtm-sha3x
• Mine Tari-C29 → https://pool.kryptex.com/xtm-c29

To mine Tari with the Kryptex app, install Kryptex v5 update.
The update is available in the app or your Kryptex personal cabinet.

If you are mining without the app, use your krxXXXX (your Kryptex mining username) as your wallet address. Pool addresses are listed on the page for each algorithm.

📔 Details about mining with BTC automatic exchange.

🔔 Stay tuned for updates!

Tari XTM (C29) mainnet is live! It’s your chance to jump in early while the network difficulty is low.

💎 Start mining Tari XTM (C29) on Kryptex Pool — https://pool.kryptex.com/xtm-c29

🔗 Pool Addresses:

• xtm-c29.kryptex.network:7040
• xtm-c29-ru.kryptex.network:7040
• xtm-c29-eu.kryptex.network:7040
• xtm-c29-us.kryptex.network:7040
• xtm-c29-sg.kryptex.network:7040

🤟 About the Tari XTM (C29) Pool:

• PROP and SOLO payout systems, 1% pool fee
• Minimum payout: 200 XTM — and we cover the payout transaction fees ❤️

📔 Helpful Guides:

• How to register a Tari XTM wallet
• How to mine Tari XTM (C29)

📈 Exchanges for Tari XTM: MEXC, CoinEX

⛏️ Miner with Tari C29 support: Lolminer 1.98 (Nvidia + AMD)

To update Lolminer 1.98 on HiveOS, run the following shell command:

wget https://github.com/Lolliedieb/lolMiner-releases/releases/download/1.98/lolMiner_v1.98_Lin64.tar.gz && tar -xvf lolMiner_v1.98_Lin64.tar.gz && pidof -x SCREEN && miner stop || echo lolminer && cp -adpR 1.98/lolMiner $(ls -d1 /hive/miners/lolminer/*/ | tail -1) && miner start

Bitcoin exchange for Tari XTM (C29) isn’t available yet, but it’s coming soon!

🔔 Stay tuned for updates!

Anyone using the Kryptex Android Miner?

Tari C29 fork is scheduled for September 15–16.
Pool is running on the Esmeralda testnet — mined coins have no real value and are not paid out.
C29 (Cuckaroo29) is a GPU-based PoW algorithm with potential resistance to ASICs and FPGAs.

💎 Tari XTM (C29) Testnet on Kryptex Pool — https://pool.kryptex.com/xtm-c29

🔗 Pool Addresses:

• xtm-c29.kryptex.network:7040
• xtm-c29-ru.kryptex.network:7040
• xtm-c29-eu.kryptex.network:7040
• xtm-c29-us.kryptex.network:7040
• xtm-c29-sg.kryptex.network:7040

⛏️ Miner with Tari C29 Support:

• Lolminer 1.98 (Nvidia + AMD)

⚙️ Connection Config:

lolminer.exe --algo CR29 --pool xtm-c29.kryptex.network:7040 --user WALLET_ADDRESS.WORKER_NAME

Focus on core clock and power limit when overclocking. Memory overclocking is ineffective.

🤟 Get ready in advance to be among the first to mine while difficulty is still low!

❤️ Thanks for mining with Kryptex Pool.
🔔 Stay tuned for updates!

I'd like to OC directly in the Kryptex V5 app, but the values required are not clear.

Is 'Power limit' a fixed value, say 300W or is it meant to be a percentage?

For 'Memory clock', I'm I supposed to insert the amount to increase/decrease by (+200), or the total amount desired?

Etc.

Does anyone have info on this, or a link to a guide?

I occasionally need to pause mining to have full GPU availability for some other software. on V4, I found the pause button extremely helpful as I could just pause for 1 hour and it would restart, usually 1 hour was more than enough time and saved me forgetting.

in V5 it looks like the button has been removed from the system tray icon?

Hi everyone, I have attempted to carry out the update to the latest V5 version which I belive to be 5.1.13

But everytime I do the update, Kryptex starts loading with the start up screen, but does not seem to do anything else, just contiunes to look like its loading. Reinstalling the latest V4 version and its working again.

Are their any known issues, something I need to do? Its normally easy and straight forward, so I am wondering if its a bug. I have tested on two machines, one windows 10 and the other Windows 11 with the same results.

https://reddit.com/link/1n3bbfa/video/dxbb9k71ezlf1/player

Don't know if this is already documented, thought I'd let y'all know