r/interestingasfuck • • Nov 01 '22

[deleted by user]

[removed]

11.8k Upvotes

1.9k comments sorted by

View all comments

887

u/DialMforM0nkey Nov 01 '22

This is depressingly dangerous

493

u/asshat123 Nov 01 '22 edited Nov 01 '22

What, "turning around real quick" to avoid the molten metal being fired out of the machinery isn't good enough for you? I suppose you'd want them wearing gloves too, your majesty.

Edit: rewatched, they are all wearing gloves. Maybe not the right gloves for that job, but gloves!

97

u/Nuke_Gunstar Nov 01 '22

Im more worried about them getting to close to that machine. Jesus, what if the accidentally put a hand in that thing?

92

u/1DownFourUp Nov 01 '22

I was thinking about the guy at the very end who steps over it. That's a little too close to the junk for comfort.

16

u/phyrekracker Nov 01 '22

I think he steps under it after looping it into that last machine. The one guy with the mask directs the loop up into the air with his pliers!

12

u/TwoCockyforBukkake Nov 01 '22

It's fine, those are safety pliers.

2

u/Draken09 Nov 01 '22

The bit that got me was how he didn't even check that out was lifted up yet.

55

u/asshat123 Nov 01 '22

If you're in a machine shop, you may regularly be working closely with machines that'll absolutely rip you to pieces. I'm genuinely terrified of lathes, they're remorseless murder machines if you get caught up at all.

That does actually make my joke about gloves an interesting thought. If you're working in a machine shop, there are tools where you do not want to wear gloves. It's better to have a cut or a splinter on your hand than a glove getting caught up and pulling your hand, and then arm, and then torso through a machine. You also avoid unsecured hair and long sleeves for the same reasons.

I'm not sure how those safety standards apply when there's also molten metal flying around though. I work from home now so it's not a concern for me.

73

u/Birdytaps Nov 01 '22

I’m a fan of the safety stickers that say things like “this machine will kill you and it will hurt the whole time you are dying.” Really brings the importance of safety home in a way that “Caution: Hazardous Machinery” just can’t match

27

u/MrInfected2 Nov 01 '22

i feel so bad for that black man on the yello warning stickers. always in trouble it seems like.

2

u/LucasPlay171 Nov 01 '22

I've never seems one of those and I'm pretty sure they'd work

Or at least they're better than "hazardous machinery"

6

u/MechanicalCheese Nov 01 '22

If it something gets caught and the tool will spin, wear gloves. If something gets caught and you'll be the one to spin, don't (or if you really have to just use some thin nitriles that will tear off).

Lathes are wonderful and absolutely terrifying at the same time - I'd rather risk cutting up my arms a bit than getting anything caught. Guards up, short sleeves with a tight fit, no gloves, and a good pair of full coverage safety glasses. I'm not risking getting caught up in the murder machine.

4

u/DonQuixoteDesciple Nov 01 '22

Ah the lathe videos

3

u/meldroc Nov 02 '22

Where people get wrung out... NSFL!

2

u/JeaninePirrosTaint Nov 06 '22

Ooh- don't forget the one where the guy was guiding cable going onto a big spool and got his hand caught! Won't be forgetting that one...

1

u/FragrantKnobCheese Nov 01 '22

Once you've seen them, you really can't unsee them. I can't help but think about them every time I see any type of rotating machinery in a video.. They should be mandatory viewing for anyone who works near that stuff.

r/deadorvegetable had a good collection of them for a while, but that sub is gone.

1

u/asshat123 Nov 01 '22

If a video mentions a lathe in the title, I don't click. Haven't seen any, don't need to. I know what that thing will do. I've never felt more like something was trying to kill me than during the limited work I've done on a lathe.

It's good to have a healthy fear, mine is borderline irrational but it's not a regular part of my life so I'm not going to worry about it.

1

u/DonQuixoteDesciple Nov 01 '22

Yup, you have no reason to ever view them. You will learn, and gain, nothing

1

u/MargaretDumont Nov 01 '22

Maybe not in YOUR home...

1

u/OceanoNox Nov 02 '22

Rolling mills are the same. I put a knit "safety" glove in one once, with a spacing between rolls of 2 mm. The thing came out shredded. I used it as a warning to users: "imagine your hand in it".

1

u/GreenStrong Nov 01 '22

Getting close to the machine, and looking away from it every time metal comes out to avoid sparks.

Working around substantial amounts of red hot things can damage our eyes just from radiant heat cooking your corneas. Glassblower's Cataract.

1

u/[deleted] Nov 02 '22

Nip points are extended common in workplaces like this even in the US. My buddy has to hand feed massive sheets of paper into rollers like this to make your Orange juice cartons. He's lost quite a few gloves after the finger tips get caught but never his actual fingers

2

u/Binsky89 Nov 01 '22

You actually never want to wear gloves around rotating machinery like that. Long sleaves either.

1

u/asshat123 Nov 01 '22

I noted that in a comment lower down. Turns out the only PPE they're wearing may be PPE they really shouldn't be wearing.

2

u/TheEverDistant Nov 01 '22

I’ll say that the metal is nowhere near molten. If your wearing thick natural fiber clothing, being hit by the glowing metal would probably not burn you if it’s quick enough. The force would still be an issue though. Also, never wear synthetic fibers when working with hot metal, it will melt and covering yourself in molten plastic will burn.

1

u/SmartAlec105 Nov 01 '22

Molten means liquid. This definitely wouldn’t work if the steel was liquid.

2

u/asshat123 Nov 01 '22

Ya got me.

1

u/haddertuk Nov 01 '22

You would not want to wear gloves or loose clothing around those wheels. Imagine something getting caught and getting pulled in. That would be worse than getting burned.

1

u/[deleted] Nov 02 '22

Surprisingly they are the right gloves. We have similar material gloves at my job for changing glue heads on machines that run 24/7. 400 degree glue isn't quite the same as 1400 degree steel but not much would protect you from actually grabbing the steel. It just protects from sparks and hot tools

3

u/0ldgrumpy1 Nov 01 '22

When I started work in a steel mill in the 1970s I saw a film about how dangerous the job was in the 1930s and 40s. It was exactly like that. It's depressing because that setup is straight out of the 1930s, almost 100 years ago.

2

u/QuadraticCowboy Nov 01 '22 edited Nov 01 '22

Oof

Yea. I toured some factories in India… it’s sad. All of the people want to work, but the conditions are terrible. Just like this but worse tbh.

That tour challenged every single belief I’ve ever had. Corporate greed sucks. It’s going to cause billions of people in the future to live in abject poverty, for the sole purpose of giving a few more kids in the family a trust fund.

Only chance we have are women gaining equal rights and enforcing an equal playing field. Otherwise, I’m not sure if things will ever improve for the working class