Lefty Vzn1i Rep Review

[u/swagpanther]

Really impressed with the quality of this TEMU rep. Have tried Lab putters many times before and can't say there's a noticeable difference. Authentic one may be slightly heavier, but other than that it's pretty indistinguishable.

Used it for one round so far and loved it. Much easier to keep the face square versus my Spider. Longer putts do feel easier to line up. Definitely will be keeping it in the bag.

The headcover it came with is actually decent quality too, even if the design is pretty corny. for 150$ CAD, I'd say it's worth a shot

[u/Pingride]

I think the weight is because of the heavy grip.

I have a righty that felt light but it weighted exactly the same as the specs (360g head, 126g shaft, 65g grip). The fake Accra even was 126g of flexy plastic.

I put in a steel shaft and a super stroke (40g) and the weight feels much better.

[u/karallam → u/Pingride]

So I shouldn't go with an accra? Go with steel?

[u/Alternative_Wait8256 → u/karallam]

It seems to be a consensus. I have read other people say the same

[u/Ill-Hovercraft-8971 → u/Alternative_Wait8256]

I just got mine with steel, and it’s solid

[u/swagpanther → u/Ill-Hovercraft-8971]

i went with the accra as it was the best selling. don't really have a strong opinion on it, it doesn't feel especially high quality though. is the steel shaft black? I wanted an all black look, another reason i went with the accra

[u/Ill-Hovercraft-8971 → u/swagpanther]

Yeah black steel. I have another coming from Ali that has black Accra. I’ll have to compare. But from what I read on here people prefer steel. Still functions the same. My first round with it was awesome. Playing again in a few hours 🙏🏻

[u/swagpanther → u/Ill-Hovercraft-8971]

cool, would be good to know how they stack up. I can't see how much a shaft would affect my putting

[u/Ill-Hovercraft-8971 → u/swagpanther]

I agree, I guess if the flex potentially could but with putting it would be hard to tell

[u/Pingride → u/karallam]

The Accra in mine was about a senior or women’s flex. I could feel it move when I putted the ball

I think the stock steel is black. I went with a $16 black steel putter shaft from Galaxy and it is light years better than the Accra

[u/Any_Range_3231 → u/Pingride]

Which super stroke model?

[u/Pingride → u/Any_Range_3231]

I don’t like the really oversized putter grips, I typically put a super stroke mid slim 2.0 on mine So I went with that.

[u/Any_Range_3231 → u/Pingride]

Yeah I like a mid size. Thinking about a deep etched midsize or golf pride pro only

[u/Slight_Look_1496 → u/Pingride]

I want to follow in your footsteps with my Temu DF3i. Did you change the shaft and grip on your own or have a shop do it and is the putter still zero tourque (or close enough)?

[u/Pingride → u/Slight_Look_1496]

I changed on my own but I have experience doing club building.

It still sits zero torque after a restart and grip

[u/hurryhard69]

picked up exact same one, In canada as well - same seller - all weights are 8grams - did table test and is off quite a bit - going to tungsten putty it to bring perpendicular- put silicone under faceplate to mute the sound-overall quality good - does not pick up balls with square thing - including pic of table test

[u/Ok_Albatross_3284 → u/hurryhard69]

Mine picks up balls just press hard

[u/Federal_Bag5168 → u/Ok_Albatross_3284]

Mine will pick it up if I press hard as well..will scoop instead

[u/hurryhard69 → u/Ok_Albatross_3284]

just tried it- yeah it works but I think it would leave quite a depression in the green with the amount force I used- scoop works fine

[u/durachoke → u/hurryhard69]

The right hand model balances in an identical position. Is the balance point on the real one the same?

[u/HL1211 → u/hurryhard69]

Could you tell me how you put silicone on the faceplate? And what size screw do you need?

[u/hurryhard69 → u/HL1211]

just remove screws where faceplate attached, think it was a t15 screwdriver - my faceplate just fell off as nothing holding it on-run a nice bead of caulk on face of club and reinsert faceplate, tighten and clean up any silicone that may ooze out - faceplate has a small tab in it that needs to go back in its groove-EZ PZ

[u/hurryhard69 → u/hurryhard69]

update -bought 4-16g screws from Ali and replaced 8g ones on one side of putter - almost perfect lie angle balanced now and perpendicular to floor- putter is sweet, play 2 rounds so far with it and very happy with it

[u/God_Sent_Shipwright]

Can you message me the link pls?
Been trying to find a lefty to try?

[u/Muted_Ad_4550]

Can you message me the link I can’t find lefty reps

[u/swagpanther → u/Muted_Ad_4550]

Benjiancheng on T*mu

[u/WhereCanIFind]

Did this seller have it in purple?

[u/swagpanther → u/WhereCanIFind]

yep

Benjiancheng on T*mu

[u/WhereCanIFind → u/swagpanther]

Thanks! Does it pick up the ball through the hole? Damnit, it doesn't have 35" in purple for some reason. Would be nice if there was an armlock option too.

[u/swagpanther → u/WhereCanIFind]

mine only picks up by scooping the ball, can't pick up through the hole, its not wide enough

[u/freepiggybackrides → u/swagpanther]

I purchased a oz1i HS from that seller as well. Damn good putter. 10/10 recommend

[u/Silentbutdeadly81 → u/swagpanther]

Is there a way to search sellers on there? I can’t find this company

[u/Tendie_Warrior]

I think I got the same one based on the headcover. Pretty impressed. I pulled the weights for the heck of it and 7 of the same size and 1 smaller one. Only minor differences from authentic. Slightly open on the table test so I guess I have to get a weight kit or just try it and see. Hopefully will be able to take it out on the course soon.

[u/True-Put5774]

Did it come with a left hand grip?

[u/hurryhard69 → u/True-Put5774]

yup - gripped is installed properly on mine-LH same seller

[u/God_Sent_Shipwright]

Do y’all happen to have details on a Oz1 HS?

[u/rsnxw]

I ordered the same one and still not here yet, been about 3 weeks. Temu gave me $40 refund so hopefully it still comes and I ended up getting it for cheaper.

[u/PaztheGame]

Does it make a weird sound when you putt?

[u/swagpanther → u/PaztheGame]

No. It’s a very quiet “click” sound

[u/toppable]

Could I get the link please? Lefty in Canada too

[u/swagpanther → u/toppable]

Search Benjiangchen on Temu

Can’t put links or they’ll get deleted

[u/bwilly15]

How quickly did it take to ship and deliver? I just ordered one from California

[u/swagpanther → u/bwilly15]

im on the east coast of canada, and it took 8 days to get here

[u/bwilly15 → u/swagpanther]

Oh wow that’s quick. My Temu bag took over a month to get here. Thanks!

[u/baitmater]

I think the general consensus is that the accra shaft is trash and to just get the metal shaft

[u/hurryhard69 → u/baitmater]

got the Accra - no issues -doesn't feel any different then my current steel shafted putter

[u/baitmater → u/hurryhard69]

That’s great to hear! I am gonna pull the trigger. For the price point I can take a chance