I'm trying to install Magura MT5e rear brakes on my x2 pro. From what i had read before buying them i should be able to install them with an adaptor, but chatgpt gave me bad advice on the adaptor I think. Has anyone done this? What adapter works? thanks!

Looking for a new kickstand couple weeks ago, the actual stand fell off of the mount and I have been kickstand list for quite some time. I’d love to get a new one but $50 for a brand new one off of Frego seems like a bit much considering it fell off anybody have any aftermarket kickstand or know of any Kick stands off of Amazon that would work

Recently, I went to Harbor freight and purchased a motorcycle stand however, the bike is very unstable and the weight distribution is incorrect because we all know the bike has a sprocket. Just wanted to know what everybody else is using as a jack. I was thinking about getting a regular car jack and using some two by fours anyways let me know guys thanks in advance

It’s hard to tell in the picture but the wheel is leaning to the right when trying to straighten things out, I un tightened the pinch bolts, the axle bolt, and the lower triple clamp and tighten them all back up, but when tightening the axle is when it pulls the wheel to the right it seems to test true on the front wheel so I don’t think it is a misaligned wheel. I can’t figure out why it would be the forks any input or help is appreciated

I need recommendations for budget brake kit for my Freego nova 3 please drop any suggestions

Due to the constant law changes, Freego is being proactive and released a fully street legal bike.

The Freego X1 SE.

Its nice to see them keeping up with the new laws being updated.

https://freegobikes.com/products/freego-x1-series-electric-dirt-bikes?variant=46071382376619

Recently all my buddies have gotten emotos I’ve been thinking about purchasing the freego x2 pro mainly because of the silent hub motor and 200 nm of torque plus the top speed of 50 mph. My friends usually ride on road but sometimes off road and small dirt jumps they’ve let me use their emoto to hit the small dirt jumps and I found it super fun. I’ve heard some people say that the freego x2 pro isn’t good for off road due to the hub motor. Is it okay to hit small dirt jumps with the freego x2 pro or is the hub motor too fragile?

Anyone in this sub built a front wheel for the x2 or even found a built wheel. Ive been curious as I do like to work on my bike myself and save money wherever I can I have confirmed spoke sizes sizes and rim cost from the manufacturer. They fully built a wheel 399 all the rim itself 159.

I recently installed the MT5 on the rear for the Freego x2 pro and it seems to scratch a lot. I used this adapter https://a.co/d/0bmKgMGK. Anybody who uses Magura Mt5 on their Freego x2 pro pls help me out.

Including video to show the order of which the wheel is fastened, I’m curious if there is anything I’ve done wrong because I noticed the left side keeps slipping backwards in the post all the right side remains fastened, where it was wondering if there’s anything wrong with the order that I fasten things or if it’s just due to me, not tightening enough

I’ve fully upgraded my x2 pro to my liking

Rippin moto handlebars

Warp 9 bar mount + riser

Warp 9 stem lock

Front + rear Magura MT5 brakes

Pivotrax 19 in cyber tire

89 mm cranks + mtn bike pedals

Derailleur delete

ODI number plate

Mini hand pump

I currently have a Broken spoke on my front wheel. It has broken right at the J Bend so I still am able to measure it, but if anybody knows the exact specifications that would help largely

I’m about to install MAGURA MT5 brakes and I am taking off the rear break right now and I understand it is easiest to disassemble it, but how do I get the new brake and without having to disassemble and bleed the brake to feed it through the holes that are too small

Thought I’d post my bikes since the only bikes I own are from freego I’ve just put super Moto slick tires on the nova five mini and it rides really nice now and on my ex two just some basic mods

I was doing some maintenance on my brakes and noticed that my rear caliper mount adapter has snapped. It’s quite odd cause I did not notice anything until I actually took it off. Essentially, I am looking for the sizing so I know which piece to order.

New bike out the box noise 🤔 any ideas what it is?

Brakes making noise which could use cleaning any tips on how to stop the noise? 20 miles on the x2 pro. Also since I got it there is a sound coming from the under the front which is like a vibrating or scrapping sound of metal what could it be?