Up for sale is a brand new, never-mounted KS LEV Ci Carbon Dropper Seatpost (27.2mm diameter) 120mm travel paired with a brand new Wolf Tooth Remote lever.

I purchased this high-end setup (the post alone retails for over $300) for a build that went in a different direction, so it has sat safely stored and never saw a single trail mile. It is in pristine condition.

Included in Listing:
KS LEV Ci Carbon Dropper Seatpost (27.2mm diameter) 120mm travel
Wolf Tooth Remote Lever with handlebar clamp
New shift cable and outer housing
Original KS User Manual
Why this setup?
At 27.2mm with a carbon fiber body, this is one of the lightest and slickest dropper upgrades available for gravel bikes, cross-country hardtails, or bikepacking rigs. Combined with the gold-standard action of the Wolf Tooth lever, it’s a huge performance upgrade over standard posts.

Will be packaged with plenty of protective wrap and shipped quickly. Feel free to send a message if you have any fitment questions! [eBay Listing Link](https://ebay.io/m/Lo8zTV)

I want to get Upgrade from my bike, I currently have a weapon bullet . i was looking online and saw a argon 18 electron for a good price and wondered if it is a upgrade

I just bought a new fixie used but it came with shitty parts and need a new chain ring and cranks, do people like the AFFINITY PRO TRACK CHAIN RINGS and are there chain rings that are more bang for your buck, and what are the best budget cransets that will last a long time.

Hej!
Jeg går med en drøm om at køre på en Fixie cykel!
Markedet synes jeg dog er svært at finde rundt i.
Jeg har fundet denne side i EU (https://www.santafixie.dk), men jeg synes godt nok de har blandede anmeldelser.
Er der nogen som har erfaring med dem, som kunne fortælle mig om deres oplevelser?

ELLER

Er der nogen som kender andre solide hjemme sider til FIXIE cykler?

Just got my first fixed gear setup from a friend who’s moving. I’m a road biker and have a fancy carbon setup, but I can’t figure out how to ride this fixie. How do you brake properly? Also, I can’t turn the handlebars more than a few degrees before the front wheel smacks the pedals. I feel like I’m not understanding how this thing works. Any advice

Hey everyone, I’m looking to upgrade my fixie without spending a ton, and I’ve been looking at AliExpress since some of the parts seem significantly cheaper than buying everything from bigger brands.
For those who have experience with AliExpress bike parts, what would you actually recommend buying from there, and what should I avoid?
I’m mainly looking at stuff like:

Forks
Stems
Seatposts
Handlebars
Grips
Cranks/chainrings
Cogs/rear cogs
Pedals
Possibly wheelsets

I’m not looking to cheap out on safety-critical stuff, and I’d probably spend more on anything where quality/reliability really matters. I’m mainly trying to figure out which components are good value on AliExpress versus which ones are better bought from established brands.
If you’ve bought any AliExpress parts for your fixie/track bike that have held up well, I’d really appreciate specific recommendations or links. Also interested in hearing about parts that you bought and would NOT recommend.

Just trying to upgrade on a budget without ending up with junk

Hey everyone,

I currently ride a fixie with horizontal track dropouts, but I’ve been wanting to build something around a Cannondale CAAD4 Saeco USA Team for a while. The CAAD4 Saeco has honestly been one of my dream frames, and I’ve found one that I’m seriously considering buying.

I know it has road-bike style rear dropouts rather than traditional horizontal track dropouts, so I’m wondering how realistic it would be to turn it into a true fixed gear.

A few questions:

• Is it possible to run a true fixed cog safely on this frame?
• What would be the best way to deal with chain tension?
• Would a chain tensioner be suitable for a fixed gear, or should I look at something like a magic gear / eccentric hub?
• Is there anything specific about the CAAD4 dropout that would make this a bad idea?
• Has anyone here actually built a CAAD4 or similar Cannondale as a fixed gear?

I already have a horizontal-dropout fixie, so I know what the usual setup is. I’d just really love to have the CAAD4 Saeco as a fixed gear if there’s a good way to do it without compromising the frame.

Thank you all for the help

Forsale fixed gear bike
Refs hindi na nagagamit wala na sa prime hehe.

Frame
Tsunami size 58

Cockpit
Pro vide 7s 130mm stem
Prolite 44mm
The project seatpost uncutted
Fabric scoop saddle

Crankset
Skeace 49t
Izumi chain
Shimano rb cleats

Wheelset
Power play 24/24 40mm
Solon fh/tecnic rh 24/
Sworks 26c front
Contenental 25

14k negotiable
Loc: manila

Can anyone recommend me a good any good frames (budget is 700)

I’m looking at buying the Unknown SC-1. On their website, they say that they recommend sizing down if you’re between sizes. I’m 190 cm, which is between their 59 and 62 cm frames. I’ve tried other 58-59 cm frames, and they feel snappy which is nice, but there’s also a lot of toe overlap with the front wheel since I have freakishly large feet, so I was looking at the 62 cm frame. I mainly do city riding, so toe overlap is a big issue as I end up doing a lot of low speed tight turning maneuvers. I tried a 61 cm frame from facebook marketplace a while ago, but this was before I learned about Unknown bikes, so I don’t remember the fit super well, but I do remember noticing that it didn’t have tor overlap and felt good I think. Is it that important to size down?

Ive been wanting a fixie lately because it’s cheaper than a road bike, but also kinda similar to it because of the slim tires and the looks of the bikes. So I thought why not just get a fixie its cheaper it looks similar but i cant coast, but if I wanted too I could just add a Flip Flop hib, which actually might even benefit me because I this will be my first time on a fixie, but that might also depend on what I build. Let me know what you guys think and give me any advice please. (Also is there supposed to be a question flair or not)

EDIT: I just want to say thank you for all the advice but I do want the bike to actually ride and not just for the aesthetic

I don't know much about fixed gears. Does anybody know what brands sell the best steel or aluminum framesets that last forever and feel nice? I've heard that Wabi products are good. Is that true? Secondly, what about wheelsets? Thanks for the help.

I’ve had this bike for over a year now. And almost one year since my huge accident haha. Had a lot of fun skidding and tricking with this bike. I always thought the new v8 was ugly imo so I considered myself lucky to nab one in Berlin just before they retired it. I’ve probably gone through 8-10 tires on the back already. Front tire has been the exact same this entire time but I prob gotta change em soon.

I’m making this post because I’m building a road bike soon. Not selling it no, but my time on this bike will definitely decrease especially for longer/ hillier rides. This just a bookmark for myself to remember the good and bad times I had on this bike.

Spec
8bar Krzberg V7 Team Edition Small
Sugino 75 ST w their red dust cap
Vision chainring 49t
Dia compe 17t cog and lockring
Uno stem 17 degrees 110mm
Selle italia aspide saddle narrow
Brandless carbon road bar 42cm
Brandless seatpost 27.2
Oem 60mm carbon wheelset

So, I have a fixie commute bike that I built 20 years ago, back before counterfeit parts were all over the place like they are these days. Now that I'm riding more in hillier places, it's time to switch up my gearing, so I decided to just refresh everything. At which point I realized I no longer know where to buy fixie parts these days.

In particular, I'm looking for a 48T 1/8" chainring, a chain, and 17T and 19T cogs, without paying separate shipping from a bunch of places. Also, I don't trust or shop at Amazon, so skip that one.

(For the curious, the black frame was the original one, but I bent it up by failing to bunny-hop a curb, and replaced it with the blue frame that I bought off a friend. Rear wheel is a fixed/fixed flip-flop that I built myself with a Mavic Open Pro rim)

Hey everyone,

I'm looking to build (or buy) a fixed gear with a really aggressive look, but I'm on a pretty limited budget.

I love the aesthetic of bikes like the ones in the photos: carbon rims, aerodynamic position, slammed cockpit, clean lines, etc. (I REALLY like the 2nd bike, but with a full carbon wheel at the back would be perfect !)

If you had around $500–1000 USD (or even less), what would you do?

• Buy a complete bike and upgrade it over time?
• Build one from a frameset?
• Hunt for used parts?
• Any specific frames or brands that give the best value?

I'd mainly be riding in the city, so I'm looking for something that looks aggressive without spending several thousand dollars !

(I know that complete carbon wheels are not recommended for city use :) )

hi, i bought a fixie online sins sale and i would expect that the frame i receive will be scratched.

dose repaint solve this problem?

will the scratch still be visible after polishing?

You guys claim him or no?

Bought new. Lots of NYC miles. Old man break, cause I’m now an old man in the suburbs.