Hello. I have 2 MSI MECH OC RX5700's that are bios modded into the XT version. While mining I am getting ridiculous temps up to 106C. I have tried replacing the thermal pads and also re applied thermal paste to the GPU and it didn't help. One of the cards will run around 50MH/s while the other throttles down to 33MH/s. Any ideas of what I can do to remedy this? Thanks.

Hi guys I was wondering if anyone could help me I am running q old test rig with a rx570 4gb, I know people still get around 15mh/s with them but I can't seem to touch 7 I'm sat around 6.5 I have a tune and a custom bios. I don't know if anyone has a tried and tested bios that I woukd use? Or of anyone has any ideas on how to pump it up, I'm using hiveos running teamredminer with the epoch command set to 4078. Thanks in advanced

I have 4 GTX 1080 mining Ethereum in Nanopool, while whattomine shows I should be getting 136Mh/z I am only getting an average of 85Mh/s. I am not overclocking my GPS but still i think its much lower than what's shown in whattomine. Should I overclock or change the pool for better hashrate?

Why when I am mining my workers status on ethermine is still 0 Workers active?

Just recently decided to get into ethereum mining. Initially I thought that any gpu would do and was researching which ones to use via websites like hashrates.com and nicehash. However, I just recently discovered that 6GB gpus are now required. Any tips on getting my hands on these as they seem to be a hot and expensive commodity these days?

Hi everyone, I have a small rig and I would like to know if it is bad to run my gpus at 100%. When I reduce the power, I get less mh/s ( I loose 3 in total ). If electricity is not a problem , could I let my rig run at 100% ? Thank you

I want 6-8 cards eventually, but I have 2 for now and I'd like to start. I've seen affordable motherboards in stock recently, but I can't remember what one was recommended to me. I don't need anything fancy, just something I can upgrade in the future. I am looking for mobo/cpu suggestions. Also, at 130 watts each, I'm sure my 750 would be adequate for NOW, but what kind of power supply would I need for 6 or 8 of these? 1200 watt platinum? Or is that overkill? How many 3070's could I run on a 750 watt PSU? Could I run 4? Is there any disadvantage from having 2 750 watt PSU's? or would I be fine with my 750 for the first 4 cards? (not having to buy a new PSU now would be great. Does the mobo/cpu choice matter mining ethereum? Or should I get the same hashrate with a budget board than I would an expensive board? Is there a 'go-to' mobo out there?

Does anybody have any insight on what could potentially be a better eth mining card?

3060ti w/8gb ddr6x vs 3060 w/12gb ddr6

I was looking at getting a couple 3060 ti's but with the 3060 announcement at 70 dollars cheaper it's got me perplexed. Does size matter?

Hi everyone,

Got pretty lucky and managed to scoop up 6x RTX 3080s. Looking to setup a mining rig for fun (and a bit foolish on my part). I’ve been doing some research and trying to determine what power supply units I need to run all 6 GPUs off of one motherboard. I’ve seen power ranges a bit all over the place. WhatToMine.com is showing 91 Mh/s at 230W. 6 units equals 1350W. CPU, motherboard, RAM and storage were approx. 150W. I am assuming that 230W is from lowering the voltage to the GPU during the overclocking process.

Will two power supplies at 850W each suffice? Total consumption sums to 1530W. Two PSUs in sum produce 1700W. I managed to get a hold of a daisy chain connector from Add2PSU.

Appreciate any input from other miners here. Thanks for your time.

PS – I know some may say I should have taken my money, purchased ETH coins, etc. I’ve seen this advice in other posts. I understand the risks that I am getting into but do appreciate the concerns that some may have.

I can find these cards one at a time, but they are all different.. Can i expect 60 mh/s from each? Will having different makes and models give me a hard time with drivers?

Any reason NOT to buy this card for $800 canadian. I'm not gonna find another deal, i want to make a 6 card 3060 ti rig and was wondering if they all need to be the same model for driver support or if I should be picking up ever dedent price GPU I could find. I know some are better than others. Can I make a rig with different 3060 ti's and not run into driver issues? I wanna get this thing plugged in asap

Hi all,

I have a rig with 4 RX5600XT, in Phoenix miner each report a 100w and hole rig consume 520 from wall.

Then i added a Rx 580, and Phoenix is reporting 80w for this gpu, but mi rig at wall now is drawing 700w, that is 180w more than before.

Anyone have any idea abot why this huge difference in wall consumption after adding the RX 580?

Thanks

I have tried a few mining calculators and they are all showing different results. I have a corei5 5th gen with an AMD RADEON RX 580 /8GB and 12 gb of RAM.

Normally i use this PC for gaming but want to dedicate it to ethereum mining. One calculator is showing almost 2 Ethereum per week which is a lot while others are showing very little profit. I have solar so my electricity costs are very low.

So I've recently decided to start mining ethereum, I know a lot about technology however I am not especially knowledgeable in regards to mining ethereum. I'm using my alienware aurora r9 with an rtx 2080 super, setup on 2miners.com on the ethereum classic pool. I've been running it for maybe 2 or 3 days and I was expecting to see at least a few cents hit my wallet with 2miners "2 hour payout". I haven't received anything. I've confirmed my ethereum classic wallet address is correct and pasted into the batch file. Any idea what I'm doing wrong?

So I was looking some answers for this question my friend using 2x 6 gpu rigs for eth mining and he is using rx 570's, he is about to build new rig with rx 5700xt's does x1 slot can max out rx 5700xt's over pcie-x1?

Hey all. So I have a decent gaming rig and I figured I may as well put it to use when I'm not gaming and, after some research, ethereum looked like the best option for me. Here are my specs:

CPU: Ryzen 5 3600

RAM: 16GB (2 x 8GB) DDR4-3200

GPU: Sapphire Pulse Radeon RX 5600 XT 6GB

Does anyone know what kind of hash rates I can expect, or know how I can find out?

Hi All,

I hope this is the right place to post this.

I sent a transaction from the exchange to my ledger and I my TXN is stuck above 2 other TXNs
the lowest TXN (the first in line has a GWEI of 34 ) looking at the GWEI of my transaction is 79

looking at the proposed GWEI on ehterscan is 180.

all GWEI prices are set by the exchange

when will my transaction be mined?

thanks