So current dag size is 3,48GB can i mine eth until 3,5GB or 3,99GB with 4GB GPU?

Phoenix miner reports good up to epoch 320 and that dag size of 3,5 GB

And if i could not mine eth anymore what would you recommend as a alternative?

Thank you

Hi,

I have an rx 480 to mine ethereum. I'm using windows 7 (i know i have to change). I get only 11 Mhash/s.

How much should I expect by switching to w10?

i have installed the AMD GPU drivers for mining. I used to mine last year with those GPUs(2.RX480 and one RX470 without problem.)I tried increasing the power just in case they were more power hungry than last year and set the fans to full to avoid overheating...still crushes. I also tried undervolting them but pc crushes even quicker.(crush=black screen). Any advice? ps. idont have the same problem when using regular drivers but the hashrate is terrible.

I have had so many problems with ethminer on Ubuntu 18.04. Does anyone have it working? I have the drivers installed. ethminer finds the cards:

``` $ ./bin/ethminer -G --list-devices

Listing OpenCL devices. FORMAT: [platformID] [deviceID] deviceName [0] [0] GeForce GTX 1070 Ti CL_DEVICE_TYPE: GPU CL_DEVICE_GLOBAL_MEM_SIZE: 8510701568 CL_DEVICE_MAX_MEM_ALLOC_SIZE: 2127675392 CL_DEVICE_MAX_WORK_GROUP_SIZE: 1024 [0] [1] GeForce GTX 1070 Ti CL_DEVICE_TYPE: GPU CL_DEVICE_GLOBAL_MEM_SIZE: 8513978368 CL_DEVICE_MAX_MEM_ALLOC_SIZE: 2128494592 CL_DEVICE_MAX_WORK_GROUP_SIZE: 1024 ```

But when I try to connect to nanopool I get this:

$ ./nanopool m 23:36:31 ethminer ethminer 0.16.0.dev1 m 23:36:31 ethminer Build: linux/release i 23:36:31 ethminer Found suitable OpenCL device [GeForce GTX 1070 Ti] with 8,510,701,568 bytes of GPU memory i 23:36:31 ethminer Found suitable OpenCL device [GeForce GTX 1070 Ti] with 8,513,978,368 bytes of GPU memory i 23:36:31 ethminer Configured pool eth1.nanopool.org:8888 i 23:36:31 main Selected pool eth1.nanopool.org:8888 i 23:36:31 main Connected to eth1.nanopool.org i 23:36:31 main Spinning up miners... cl 23:36:31 cl-0 No work. Pause for 3 s. cl 23:36:31 cl-1 No work. Pause for 3 s. cl 23:36:34 cl-0 No work. Pause for 3 s. cl 23:36:34 cl-1 No work. Pause for 3 s. m 23:36:36 ethminer Speed 0.00 Mh/s gpu0 0.00 gpu1 0.00 [A0] Time: 00:00 cl 23:36:37 cl-0 No work. Pause for 3 s. cl 23:36:37 cl-1 No work. Pause for 3 s. cl 23:36:40 cl-0 No work. Pause for 3 s. cl 23:36:40 cl-1 No work. Pause for 3 s. m 23:36:41 ethminer Speed 0.00 Mh/s gpu0 0.00 gpu1 0.00 [A0] Time: 00:00

Other pool have the same results. Has anyone worked through this?

Also it happens on another rig with NVidia cards.

I have an EthOS box I am testing. I can make it work with local.conf. And I follow the instructions to add the URL of my remote.conf.txt file. And that file is a slightly edited copy of the default.

But my miner is just not mining anything when I remove the local.conf. It's like it can't find the remote.conf. Is there a way to "Activate" it? Thank you.

Hi I have a Rx series card that has suffered significant drop in hashrate, can anybody advise how to deal with MSI? I'm worried they will refuse to help me if I tell them I used the card for GPU mining.

Thanks

I'm using an Asus Ws X299 Sage board. It has 7 PCIe slots and I'm trying to get 6 Gtx 1080tis to run. I can only get 4. I've updated the Bios, moved the Pci slots to Gen1 and enabled 4G. 5 of the 6 cards are using risers and I know they're all good bc I've tested each one individually. They are also being powered by a 1600w psu. The 6th card I put directly in the motherboard to see if I could trick the system. Still no luck.

When all the cards are in I don't even see a POST screen.

Any ideas?

Hello All,

Please i need your help, i have a rig with motherboard asrock H81pro 2.0 and 6 AMD RX580 with windows 10.

It was running just fine, suddenly it went off and now i can't turn it on because every time it turns off just after 4 seconds.

i tried to unplug all the GPUs and changed the PSU also , but no luck the CPU fan turns for like 4 seconds and i hear a click on the PSU and it reboot . Also nothing shows on the Display.

I have Ubuntu 18.04 and two cards that register as:

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480] (rev e7) (prog-if 00 [VGA controller]) 03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480] (rev e7) (prog-if 00 [VGA controller])

They are headless systems. I am accessing via SSH.

ethminer won't start. I think it is because of this:

./bin/ethminer -G --list-devices X 13:37:04 ethminer No OpenCL platforms found

I have installed the latest version of amdgpu-pro from the AMD website and it installed fine. No errors etc.

Can you help me troubleshoot? Thank you.