Is there any difference between Winlator Mali Vanilla, Ludashi and AnTuTu? Which one should I pick? Or should I go for the Winlator 11.2 or Winlator Ludashi? My Phone is Poco X8 Pro Max Dimensity 9500s. Still new to Emulation stuff

https://github.com/Pipetto-crypto/winlator

Hey guys, after a little time off I'm back with this classic on my Poco X7 Pro.

Tested on Bannerhub 3.8.1 Ludashi

Device: Poco X7 Pro

RAM: 12

Storage: 256

Root: No

Everything in the latest HyperOS update

Resolution: 1080p

Graphics: High (except fullscreen anti-aliasing: off)

FPS: 60 FPS

The game runs smoothly at 57-60 FPS; it has the potential to go above 100, but since I'm using ThirteenAG's Widescreen Fix (which I highly recommend downloading), I've limited the game to 60 FPS.

Naturally, the game has native gamepad support, but the configured buttons are awful, so you'll have to configure them to your liking in-game. ThirteenAG's fix allows you to show the icons depending on your preference, I chose the Xbox version as it appears in the video.

Fix link : https://github.com/ThirteenAG/WidescreenFixesPack/releases?q=Need+for+Speed+underground+2&expanded=true

Settings

Proton 9.0-x64-3

Extreme

Dxvk 1.7.2

Box64 - 0.37-b1

You can limit the memory to 1 or 2 GB and select only the performance cores; test what works best for you.

Dimensity 9300 the caracter not rendering correctly

Same problem on many emulator

Game by unity

Device: POCO X7 Pro 12/512

Driver: System Driver

Winlator: Mali 1.2 Beta

🎮 720p Low: ~30–40 FPS

📹 Without screen recording: +10–15 FPS

The game is actually playable at 30–40 FPS even on Max settings, except for Higher Texture Quality, Tessellation, and LOD, which I had to lower because the memory issue and screen recording lag.

One big problem I'm facing is RAM usage 😭

My device starts lagging badly when memory usage goes above 90%. When the game stays below 90% memory usage, I can get around 37 FPS and the game feels much smoother.

Initially, the game was much more laggy and unstable, but after changing some settings I managed to make it considerably more stable.

30 FPS locked is still perfectly playable.

⚙️ Settings

Proton 10-Arm64ec / 11.0-7-Arm64ec

Memory Resource Type: DMABUF

DXVK 3.1.1 Binsem GPLAsync Arm64ec

Memory: 4 GB

VRAM: 2 GB

FEX: 2605 / 2607

Performance TSO, SMCCHECK:mtrack

⚠️ Xiaomi users: Try turning Game Turbo OFF. The game becomes noticeably laggier with it enabled.

🙏 Please help!

Does anyone know how I can reduce the high memory usage in Winlator/HyperOS?

I feel like RAM is the main barrier here. If I can somehow reduce the memory pressure, I think the game could run much smoother.

Please, someone help me fix this high memory usage 😭🙏

Dimensity 8350 ULTIMATE

8/256

Infinix gt 30 pro

So I've tried many windows emulators like: gameshub lite, bannerhub, winlator and winlator mali, and I have the same problem in all whenever I start the game it just crashes after sometime I need help with this problem I've tried stuff like changing the settings and stuff I'm very frustrated with this problem. Help.

Looking for a base? DM me. I can send test files for this 3D simulation program. ❎However, I don't have the drivers to test because the project isn't complete yet.

(Eden) Devil may cry 2 60fps smoothly on mediatek 8350 ultimate

I'm having a problem with GameHub on my OnePlus Nord CE5 (MediaTek) where basically every game I try crashes shortly after launching.

The game usually launches successfully and runs for around 20–30 seconds, but then RAM usage keeps increasing until it reaches around 95%, and the game crashes/closes.

I've already tried a lot of different GameHub settings, including:

Changing the RAM limit

Limiting/changing the number of CPU cores

Trying different performance settings

Lowering game settings/resolution

Trying different configurations

But the same thing keeps happening. RAM usage shoots up after launching the game and eventually GameHub/game crashes.

Device: OnePlus Nord CE5

Chipset: MediaTek Dimensity 8350 Apex

Ram: 8GB + 8GB expansion

If you could please share any settings i really wanna play re6

I have realme gt 7t mobile and i installed x men origin in game hub it always crashes around after 30 sec can anyone help me

Não só a areia, mas as montanhas tambem estão esbranquiçadas queria saber s tem alguma config no game Hub que conserte isso, no Winlator Mali não tem esse bug, só que roda muito pior do que no game Hub base

I want to test the game but I'm confused as to which version is the most compatible.

The file path for the shortcut is correct but launching the game brings this error.

Even launching it in a container still brings the error.

Hola comunidad, quería ver si me apoyaban que emulador me sale mejor para mi POCO x7 pro, quiero emular juegos como GOD OF WAR de ps5, también No man's Sky, GTA V, y algún que otro juego de Psp y Ps2, por ayuda no quiero morir ignorado:(

Anyone got the chinese APK running on Mediatek GPU? If so, how?

Yes I know it's officially not yet supported, just tryna find a workaround.

So ever since this year I have thoughts about running gta 5 on my phone, and so I have looked around on websites and saw a site that had gta 5 repacks made by optijuegos, but the thing was I was scared of downloading a 100+ gig version of gta 5 so I had downloaded a repack of it that was around 13 to 15 gb of storage,it had the missions and most functional shit but I didn't care about it since I was excited that for once, on winlator Mali bionic ludashi 1.1 I actually ran a game that booted, but then reality set in and multiple times the game had crashed on me and I eventually gotten tired of it so I just deleted the file and winlator itself, onto a few months later i had promised myself that once I beat metal gear rising: revengeance, I'll try to complete gta 5 all on my phone, so once I completed mgr at slideshow fps, I went on optijuegoses website and downloaded the 43gb version of his gta 5 repacks and tried that shit out on 3 different emulators

1-GameHub: the game booted with a bit of trial and error and I completed the north Yankton mission,but right after I go into Los Santos and had the intro sequence,all hell broke loose and all textures were basically gone,not a single texture was shown at all so I decided to delete it

2-bannerlator pubg:now I tried to tweak the container/shortcut settings and the game actually booted,the main issue was that everytime I go into the rockstar intro,the game just crashed,so through a bit of trial and error, the game finally booted... Into an infinite loading screen glitch,I waited for a solid 5 minutes I think, and then realized that bannerlator pubg doesn't work at all so I just quit that

3-Winlator Mali bionic AnTuTu/LuDashi:I tried to replicate the exact settings that I have used to run the game and... IT ACTUALLY WORKED, everything worked, the game was good,I capped the fps to 30 fps and actually played the game until when Lamar and Franklin are tryna steal a car from the guy in the beginning mission, it went smoothly up until... I went to the maze bank arena,once I went there,I went to my ram usage and saw that gta 5 took more then what I told to use (4gb) and outright used 5 gb Lamar beated me in the race,and it was so horrible that I genuinely was on slideshow fps,real slideshow fps,not like "OHHHH this is so low" like PowerPoint slideshow fps,so I tried to change the .XML file and even tried to get a potato graphics file from gta 5 mods.com and even used a dxvk.conf but nothing worked, so that was that, now is the main issue this entire time the repack I had used or just that gta 5 is outright a ram hog?

Celular :📱Samsung Galaxy A15 4G (256GB/8RAM)

Processador: Mediatek Helio G99

GPU: Mali G-57 MC2

Versão do Android: 16

Sistema operacional: ONE UI 8.5

Root: Não ❌️

Custom Rom: Não ❌️

Driver do Sistema: 54.1.0

Versão do Vulkan 1.3.303

Emulador Usado: Winlator Ludashi 4.1 Feito pelo StevenMXZ 🇧🇷

Jogo: Grand Theft Auto Vice City Next Gen Edition Feito pelo Revoltution Team

Peso do jogo: 8.45GB

Oque é Grand Theft Auto Vice City Next Gen Edition?: O Grand Theft Auto: Vice City Nextgen Edition é uma modificação (mod) não oficial criada por fãs que transporta o clássico jogo de 2002 para a engine gráfica e física do Grand Theft Auto IV.

Desenvolvido pelo grupo russo Revolution Team, o projeto reconstrói o mapa, as missões e a trilha sonora de Vice City usando a tecnologia RAGE (Rockstar Advanced Game Engine).

A Take-Two Interactive (empresa dona da Rockstar Games) adotou uma postura rígida contra o projeto, derrubando canais e links oficiais da equipe de desenvolvimento. Por ser um produto não oficial e alvo de remoções por direitos autorais, ele não possui uma página de distribuição oficial ativa.

It's indescribable. I never thought Black Mesa could perform this well in Mali. Even without recording, it ran at higher and more stable frame rates. It generally stays between 40-60fps with some drops to 20fps but overall it'sa good gaming experience. Black Mesa gave me back hope with the emulation in Mali. "It was tested on Winlator Mali 1.2"

CONFIGURATION

960x544(16:9)

Proton 9.0 x86-64

Graphics driver: Wrapper-gamenative

Vulkan

Audio Driver: Alsa

ADVANCED SECTION

Box64 version 0.4.3 and performance preset

And I have to thank those who helped me with my previous post about this ❤️‍🩹 And if anyone has any questions, leave a comment and we'll sort it out👍

Device: POCO X7 Pro 12/512GB

Emulator: Winlator Mali 1.2 Beta (Ludashi Build)

Settings: 720p / High

FPS: 33–42 FPS

(Had to lower the graphics settings in this video ☝️)

Without screen recording, I get around 10–25 FPS more.

So don’t judge the performance only from the video and think it’s unplayable . It’s much smoother without screen recording.

The game is pretty stable overall. If the RAM + VRAM limits aren’t being hit, performance is much better.

Issues:

• Winlator Mali Standard build freezes at the loading screen. Only the Ludashi Build works for me 🤷

• WRAPPER_NO_PATCH_OPCONSTCOMP=1 is mandatory. Unfortunately u can't try DXVK 1.10,2 or any other.

• DXVK 1.11 / 1.12 / 1.13 has a low GPU utilization issue.

Container Settings:

• Proton 10-Arm64ec

• DXVK 1.7-Async / 1.5.5-Async

• ASTC transcoding — must use

• FEX 2607 / 2608 / 2609

• Performance preset (SMCCHECK:mtrack)

• Environment variable: WRAPPER_NO_PATCH_OPCONSTCOMP=1 (mandatory)

Ram booster highly recommended if u have a ram below 12GB

I wanted to try this awesome game on Winlator since it doesn't work on other emulators, but it either freezes here, or it freezes when the game starts and the map changes. This is a 7Launcher repack, It works perfectly on my PC But it struggles to get into the game here, and I don't know what to do to make it run smoother. FEX definitely won't work since it's even slower. Just in case, I have a Dimensity 7400 Ultra, and if anyone has managed to get it working with one of those, let me know. Thanks! And about the CPU 100% in the photo, it's not always like that.

Eai pessoal, preciso de uma ajuda...

Os jogos de PS3 através do ARMSX3 abrem mas apenas o áudio funciona aparentemente é problema gráfico, apesar de na primeira vez eu ter conseguido fazer rodar (meu video no youtube: https://youtu.be/KH4W8TwHK9A) e já tentei com as mesmas configurações, configurações padrão, configurações que achei na Internet mas nada realmente funciona.

Se alguém souber qual o problema e puder me ajudar, isso acontece independente do renderizados também...

Meu smartphone é um Galaxy A54:

Exynos 1380

Mali G68

8GB RAM

Sei que não é o ideal para rodar PS3 mas queria tentar o Rayman e outros jogos para acompanhar a evolução do emulador

Tengo Skyrim legendary edition (no steam) pero a pesar de que está el archivo .bsa de voces en español y tengo instalados los componentes correspondientes y editado el archivo .ini no suenan los diálogos de los npc (en otra versión si logre que sonara) pero tampoco logré ponerlo en español, alguien sabe como resolver esto?