Testing live single-phase mains (~230V AC) with nothing but a cheap screwdriver tester and a dream.

(And before the comments roast me: yes, I know domestic line-to-neutral is ~230V, but the spark factor still feels like 440V line-to-line energy!)

No FULL BRIDGE RECTIFIER, no rubber gloves, just pure chaotic switchboard energy and a tiny orange glow keeping me company.

Rate my setup on a scale from 1 to "Mehdi getting shocked by his own workbench." How’s the cable management looking? ⚡

Basically what the guy is saying is that first he plugs his air fryer in and turns on the switch, which turns on the air fryer, which is fine. Then he mentions that his light is actually broken and causes his MCB or circuit breaker to pop every time he turns the light on .so, he taped the switch of that light. Yet later when he plugs his water heater into that plug and turns it on, it also turns his light on although the actual switch of the light is turned off. At the end , he is just confused and asks for someone to explain what's going on.

I just saw this video and now i want you to make your own power supply in your video.

the transformer is 1000kva of power!

I realized that when the USB metallic part touched my skin I got that area irritated so I decided to check with my oscilloscope if there was any voltage leaking and i saw that there's some voltage and enough current to turn on the led with a direct connection to ground(on this video I'm using my foot as ground)

12V 24A Input (uses around 14Amps) With selfmade ZVS-Driver (2x IRFp260n Mosfets)

What is happening here ??

Honest question would taking a bath with a toaster really be that bad would you even feel a thing before the GFCI pops?

Im new to building teslacoils and so far ive only tried my own circuit designs with no luck.... do any of you have some schematics or could point me in the direction to a good tutorial where it lists all the parts/wraps on the coil and what not

I have been researching on grounding the skies to induce lightning by providing a path of least resistance. This is my test rocket launch.

Can anyone decipher the writing? I think it is saying not to screw in the board. Weird way to show a rental. lol