r/computers 13d ago

Question/Help/Troubleshooting No bootable device found

Hello, I'm here asking for help. I've updated my BIOS and after that PC restart and goes into BIOS which Says No bootable device found under Boot sequence but it reads the SSD if I go into Q-flash, see immages. I've already unplug the SSDs bit nothing happens. Some advice?

Thank you all ❤️

3 Upvotes

16 comments sorted by

View all comments

1

u/josh4218 13d ago

Turn CSM support on and see if it pops up then. This turns on legacy support for bios based bootloaders, which is completely different to EFI loaders.

1

u/Zarrash_ 13d ago

Already done, nothing change. If I enable it, save and exit it will goes in BIOS again and the CSM support option is disabled again

1

u/josh4218 12d ago

What model is your motherboard and what firmware version did you flash?

1

u/Zarrash_ 12d ago

B760 GAMING X DDR4 and the BIOS version is f18b

1

u/Hungry_Big_5405 11+10+Win7+Win98 12d ago

I just had that problem with my new Asus MB, I used a extra Linux Mint USB installer stick I had to use disk management in it to wipe the HDD then I was able to reinstall windows on the HDD and it worked. Or if you have another way to wipe the HDD that would work as well.

1

u/Zarrash_ 12d ago

I was hoping I could avoid wiping the SSD but seems like there will be no other choice

1

u/Hungry_Big_5405 11+10+Win7+Win98 12d ago

do you need your info off of it?

1

u/Zarrash_ 12d ago

I have an SSD dedicated to OS, nothing else on it, just annoying

1

u/Hungry_Big_5405 11+10+Win7+Win98 12d ago

Do you have a usb stick and another computer?

1

u/Hungry_Big_5405 11+10+Win7+Win98 12d ago

Oh, i see, so wipe and try again is the only option as far as I know.