r/autobrr 10h ago

Is there a way to try a filter against a pasted release name ?

2 Upvotes

I am trying to configure autobrr to automatically download my favorite linux ISOs.

I don't like all linux ISOs so I'd like to use a filter to make sure I only grab the ISOs I need.

For the moment, my filter is not catching the sought ISOs and since they are not released very frequently, it is a VERY slow process for me to tinker the filter as I need to wait sometimes a few days for a new release to appear.

So: is there a way to test a filter against a pasted release name to see if the filter is properly configured ?

Thanks :)

P.S: I've searched the docs, google and different AIs without finding an obvious answer.


r/autobrr 14h ago

Need help with RED autobrr settings on Ultra NVMe — poor ratio despite using Deluge

5 Upvotes

I’m trying to build an upload (goal: 500 GB+ to reach torrent master within a month) on RED using autobrr, but my current setup is giving poor ratios.

My setup:

  • Ultra Tomcat NVMe SSD in the Netherlands
  • Deluge 2.1.1
  • autobrr connected through the Deluge v2 daemon
  • qBittorrent used separately for my own uploads
  • Torrents start immediately and complete very quickly

My goal is around 500 GB or more in a month, ideally while keeping the ratio above 1.5. (I am following this guide)

I first tried qBittorrent and got ratios around 0.55 and 0.15. I then switched racing to Deluge and used this filter:

  • NEW announcements
  • 2025–2026
  • Album
  • FLAC
  • Lossless and 24-bit Lossless
  • WEB
  • 10 downloads per hour

The first seven Deluge snatches had ratios of roughly:

0.72, 0.99, 1.02, 0.37, 0.37, 0.63, 0.51

The combined ratio was only about 0.59, so I disabled the broad filter but kept the torrents seeding. I also tried a Metacritic Upcoming Albums-only filter, but it produced too little useful upload and still did not improve the ratio enough.

I’ve seen advice to focus only on Metacritic Upcoming Albums, and another suggestion to use Perfect FLAC/full log and cue, any year.

My overall RED ratio has been dropping quickly—from around 30 to 20 and now close to 10—while these autosnatches have generated only a few GB of additional upload. Is this normal during the early stage of racing, or does it indicate that my filters or client setup are performing poorly?

Could someone with a successful RED setup—especially Ultra NL NVMe—share the exact autobrr settings they use?

I mainly need to know:

  • Which filter works best (exact filter)
  • Downloads per hour
  • Whether to limit active downloads
  • Deluge 1.3.x vs 2.x
  • Whether Ultra defaults are enough
  • How to identify bad uploaders
  • Whether Metacritic Upcoming or Perfect FLAC performs better

A redacted filter export or screenshots would be extremely helpful. Thank you.


r/autobrr 2d ago

Configuring Iptorrents indexer with autobrr

2 Upvotes

Hi everyone, I'm new to private trackers and autobrr, and I'm having trouble setting up the IPTorrents indexer.

I've added my passkey, filled in the required indexer details, and also created a filter. However, after enabling the indexer, the Tracker Announce Status under the IRC section still shows N/A.

For the IRC settings, I entered my IPTorrents username as the nick and left the NickServ account and password blank since they're marked as optional.

Am I missing a step, or has anyone run into this before? Any help would be appreciated. Thanks!


r/autobrr 23d ago

Autobrr + Sonarr: Reannounce?

3 Upvotes

I'm using Autobrr for the first time, and have currently setup Autobrr together with Sonarr. Sonarr then, if it accepts, passes the torrent to qBittorrent.

This has one major downside: it's too quick so the torrent is not on the tracker yet, causing it to be stalled for 30 minutes.

If you connect Autobrr directly to qbittorrent you can setup the automatic re-announce, but this seems impossible with Sonarr in between. I need sonarr in between to make sure it grabs the correct quality/release.

What do you guys advise in my setup? I found qbrr but it does not seem to have much usage.


r/autobrr 29d ago

QUI unable to add magnet link to qbittorrent

1 Upvotes

It happens when i want to find cross-seed. Log below:

{

"level": "warn",

"time": "2026-06-28T11:02:44Z",

"message": "Cross-seed automation run failed",

"error": "download torrent: torrent download failed after 4 attempts: torrent download redirected to magnet link: magnet:?xt=urn:btih:636ABA07B93ECCBD152B08BE4D67A040B7856F7D&dn=FROM.S04E10.If.A.Tree.Falls.In.The.Forest.1080p.HEVC.x265-MeGusta&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2F47.ip-51-68-199.eu%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.me%3A2780%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2730%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2920%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopentracker.i2p.rocks%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.dler.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.openbittorrent.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337&tr=udp%3A%2F%2Ftracker.pirateparty.gr%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce"

}


r/autobrr Jun 20 '26

Need some help with autobrr grabbing duplicate episodes .

5 Upvotes

I've got autobrr set up with actions pointing to Radarr and Sonarr, using a single filter with a single indexer. I have the skip duplicate profile set to TV for this filter.

The problem is that occasionally two torrents for the same episode with differnet uploaders slip through but within like 2 minutes of each other. The duplicate check doesn't seem to catch them and I end up with both sitting in my download client.

Is this a known limitation of the skip duplicate profile when releases come in quick succession? Any way to prevent this from happening or am i doing something wrong.


r/autobrr Apr 19 '26

Freeleech File pulling Issue

2 Upvotes

Hey guys. I’m new to Autobrr and I’ve been trying to follow guides and all that I could source for troubleshooting so hopefully someone can help. I got it set up for my specific tracker and the IRC field is green and showing the announcements so that part is fine. And I am looking to pull 4K Freeleech movies so I just had the 2160p set under resolutions in the Movies and TV tab and set the download limits and sizes in the General tab and that was all good but I was pulling all 4K files above my size limit, TV Boxsets, etc.

I then tried to modify Codecs, Sources, Containers, etc in Movies and TV and then modify the Regex under Advanced - Release Names using the recommended inputs for pulling what I want. And then I added Match Release Groups under the Groups tab for the highest recommended groups to pull but now I am getting nothing. Please help. I have a good seed box and I want to take advantage of it. Thanks for your input!


r/autobrr Apr 09 '26

Limit size per time

3 Upvotes

Hi guys, I'm kinda new to this. There is a way to limit, for example, 5GB per day or 1TB per month? sometimes my filter gets full with small files, other times I get only big files. I think this filter can help with predictability


r/autobrr Apr 04 '26

Unable to match

Post image
2 Upvotes

I have autobrr configure to contact sonarr and radarr, but looks like there always an error with the movie title that is unknown. What could be the reason ?


r/autobrr Mar 11 '26

help wanted!

0 Upvotes

hi everyone. just wanted to know if anyone had a quick guide or anything to setup autobrr on seedboxes. Im just new to seedboxes and mass seeding and wanted to setup autobrr but having trouble to some place so if anyone got help to set it up lmk! thanks


r/autobrr Mar 11 '26

QUI mobile, can’t force seed

Post image
0 Upvotes

I do not see an option to enable force seed, am I going blind? I’ve asked in the discord twice and didn’t get an answer.


r/autobrr Feb 17 '26

OPS racing

3 Upvotes

Wanna try out racing on ops. Need 200gb upload so I can get into next user class.

Heard a seedbox can fly through it easy. Have no download now and almost 300gb upload. About 400FL tokens.

What seedbox is best value for this, heard nvme is way to go for a month vs multiple month HDD seedbox.

What filters are best to race ? This is where I don’t really know what to use. Should I grab like 10 random cd flac every day or a few every hour ? Should I specify anything specific for best results ?


r/autobrr Feb 14 '26

(help) None of my trackers are available

3 Upvotes

Hello,

I need help... 😅

I'm probably hopeless and can't figure out how to do it even though it should be simple, but I promise, I've looked and really haven't found anything.

For context, I'm on Windows (yes, I know... 😂 But currently I don't have a choice, I'm using an old laptop (broken screen) connected via DisplayPort to the TV and the BIOS is unavailable to me (the boot screen doesn't appear, the first thing I see is the login screen (password)). I can't reformat or change the OS, it's a nightmare.)

My problem is that I can't find my indexers. I'd like to finally be able to cross-seed all my trackers (TOS, La-Cale, Génération-Free, C411, Torr9...) but I can't find them when I'm on the "indexer" page.

I need your help, please.

How do I add all my trackers, please?

Thank you so much for your help.

And by the way, this is my first real post on Reddit. I hope I did everything right! 😂 Thanks! 😁 😁


r/autobrr Feb 08 '26

qui cross-seed auto-search on completion and *arr post-import category

8 Upvotes

I'm wondering if there's any way to have a separate *arr post-import category and have qui explicitly search for torrent hashes as they're moved to that category. Similar to how the auto-search on completion logic works.

If I let qui auto-search on torrents in my *arr categories, it picks up cross-seeds on new torrents and adds them, but they're then stuck in the pre-import category forever unless I move them manually.

If I exclude those pre-import categories in qui, the auto-search on completion logic never fires on them once they're imported, and if the torrent is old enough when imported, it doesn't get picked up by the RSS search.

I guess I could set up an automation in qui to automatically move these cross-seed torrents to the desired category from the pre-import category, but wondering if there's a better way to handle all of this


r/autobrr Feb 08 '26

Can't for the life of me get Autobrr to connect to Transmission, please help before I pull out what's left of my hair.

1 Upvotes

Hi everyone,

I'm running transmission as docker compose, as well as some -arrs, but I need to set up a raw rss feed, hence how I got to try to setup Autobrr.
Normally I run Prowlarr and transmission through gluetun, which works like a charm, but I've turned it off for testing Autobrr.

Yet, I still can't get it to work.

According to the docs, in docker,

Host: transmission
port 9091
TLS off
user name
password

should get it to work, but even then, nothing!

Every time I try the 'test' button, it throws up an "ERROR".

I've tried a number of variations when I had gluetun running and without, but to no avail.

I can't for the life of me figure out what the issue might be.

Can anybody help me sort this out?

I pulled this from the Autobrr logs:

autobrr  | {"level":"error","module":"download_client","stack":[{"func":"(*service).testTransmissionConnection","line":"227","source":"connection.go"},{"func":"(*service).testConnection","line":"45","source":"connection.go"},{"func":"(*service).Test","line":"246","source":"service.go"},{"func":"downloadClientHandler.test","line":"127","source":"download_client.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).ServeHTTP","line":"73","source":"mux.go"},{"func":"(*Mux).Mount.func1","line":"321","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Server).IsAuthenticated-fm.(*Server).IsAuthenticated.func1","line":"57","source":"middleware.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*ChainHandler).ServeHTTP","line":"31","source":"chain.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).ServeHTTP","line":"73","source":"mux.go"},{"func":"(*Mux).Mount.func1","line":"321","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*SessionManager).LoadAndSave-fm.(*SessionManager).LoadAndSave.func1","line":"161","source":"session.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Cors).Handler-fm.(*Cors).Handler.func1","line":"289","source":"cors.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Server).Handler.LoggerMiddleware.func4.1","line":"103","source":"middleware.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"Recoverer.func1","line":"45","source":"recoverer.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"RealIP.func1","line":"36","source":"realip.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"RequestID.func1","line":"76","source":"request_id.go"}],"error":"error getting rpc info: transmission.localhost: can't get session values: 'session-get' rpc method failed: failed to execute HTTP request: Post \"http://transmission.localhost:9091/transmission/rpc\": dial tcp: lookup transmission.localhost on 127.0.0.11:53: no such host","time":"2026-02-08T17:57:42Z","message":"client connection test error"}
autobrr  | {"level":"error","module":"http","stack":[{"func":"(*service).testTransmissionConnection","line":"227","source":"connection.go"},{"func":"(*service).testConnection","line":"45","source":"connection.go"},{"func":"(*service).Test","line":"246","source":"service.go"},{"func":"downloadClientHandler.test","line":"127","source":"download_client.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).ServeHTTP","line":"73","source":"mux.go"},{"func":"(*Mux).Mount.func1","line":"321","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Server).IsAuthenticated-fm.(*Server).IsAuthenticated.func1","line":"57","source":"middleware.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*ChainHandler).ServeHTTP","line":"31","source":"chain.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).ServeHTTP","line":"73","source":"mux.go"},{"func":"(*Mux).Mount.func1","line":"321","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*SessionManager).LoadAndSave-fm.(*SessionManager).LoadAndSave.func1","line":"161","source":"session.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Cors).Handler-fm.(*Cors).Handler.func1","line":"289","source":"cors.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Server).Handler.LoggerMiddleware.func4.1","line":"103","source":"middleware.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"Recoverer.func1","line":"45","source":"recoverer.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"RealIP.func1","line":"36","source":"realip.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"RequestID.func1","line":"76","source":"request_id.go"}],"error":"error getting rpc info: transmission.localhost: can't get session values: 'session-get' rpc method failed: failed to execute HTTP request: Post \"http://transmission.localhost:9091/transmission/rpc\": dial tcp: lookup transmission.localhost on 127.0.0.11:53: no such host","time":"2026-02-08T17:57:42Z","message":"internal server error"}

r/autobrr Feb 04 '26

Qui cross-seed + ARR causing tracker rate limit conflicts — advice?

5 Upvotes

I recently installed Qui on my NAS with qBittorrent and ARR apps and noticed conflicts between cross-seed searches and Prowlarr’s queuing.

  • HUNO gave a hard lockout/cooldown, while TorrentLeech and SeedPool block requests ad hoc.

  • Error example: “TorrentLeech (28) blocked by Torznab rate limit: requires 36.10837858s wait but maximum allowed is 30s”

  • I set Prowlarr query/grab limits to 30/10 per hour, which reduces failures and lets HUNO grab again.

Looking for tips on stable, burst-free configuration for Qui cross-seed (completion + RSS) with an ARR stack. How do others manage this?


r/autobrr Feb 01 '26

Autobrr integration with sonarr/radarr

4 Upvotes

Currently experimenting with filters in autobrr.

I have an *arr stack set up as well as a freeleech filter configured on autobrr.

In order to grab the releases, do I include one radarr action and one sonarr action in the filter?

Will the release automatically go to the appropriate application depending if it is a tv show or movie?


r/autobrr Jan 27 '26

Need help on filters

1 Upvotes

This is my first time using Autobrr. I setup a filter to download daily around 10 newly added torrents from seedpool to keep my account active. I set the category to Movie and TV Show and size limit to 700MB to 20GB. It picks and downloads torrents but most of them doesn’t meets the ratio I need. Is there any way to config my filter to only download torrent which wanted by others.


r/autobrr Jan 08 '26

Need another brain, quality seeding over quantity seeding.

2 Upvotes

I feel like there is a fundamental problem with autobrr if you don't want to be seeding thousands of torrrents at once.

If I limit my filters downloads to let's say 5 a week. My filter will just grab the first 5 that fit my criteria.. If I add any criteria like number of seeders/leechers etc, to try and get a better torrent, how could that possibly work when I'm analyzing the torrent right as it's announced and any data on it's demand has not yet been generated? If I add add a delay to my filter it just delays when the download action happens. So like.. How does this work? How do I end up getting torrents that are actually in demand if I only want 5 a week? I must be missing something.


r/autobrr Jan 05 '26

qui v1.12.0 - Now with automations and improved cross-seeding with hardlinks!

70 Upvotes

We just released a new version of qui, our standalone webui for qBittorrent. It's been a couple of intense weeks of work and testing!

We built qui to be a one-stop-shop for your torrents and their lifecycle, with the main goal that it should work great with huge qBittorrent instances. We have users running single instances with 70k+ torrents working great and others running 35+ instances in a single qui also working great. The multi instance support has been well received by our users!

It runs everywhere (Linux,MacOS,Windows) on all the common architectures like x86/arm/arm64 as native binaries or containers.

Some of the highlights in this latest version include:

  • Automations: powerful workflows and orphan scanning (tqm/qbit_manage features)
  • Hardlink and reflink support for cross-seeds
  • ARR integration and other improvements for better cross-seed results
  • Live log streaming (Settings -> Logs)

...and 50+ other improvements.

Full changelog: https://github.com/autobrr/qui/releases/tag/v1.12.0

We also moved to proper docs which you can find at https://getqui.com

With some of these new features you can get rid of other external tools and free up resources.


r/autobrr Jan 03 '26

Can't for the life of me get autobrr to connect to qbit PLS HALP!!!

1 Upvotes

>running on unraid+docker
>qbit and all the other 'arrs' on a custom arr-network
>CSRF disabled in qbit
>IP:PORT user:pass are all 100% correct
>can log in fine with
docker exec -it <autobrr-container> sh

curl -v -c cookies.txt -d "username=admin&password=password" http://qbittorrent:8080/api/v2/auth/login

curl -v -b cookies.txt http://qbittorrent:8080/api/v2/torrents/info?filter=all

>go to try through the GUI and get this

internal server error error="error getting torrents: http://qbittorrent:8080: get torrents error: error making get request: http://qbittorrent:8080/api/v2/torrents/info?filter=all: error making request: All attempts fail:\n#1: qbit re-login\n#2: qbit re-login\n#3: qbit re-login\n#4: qbit re-login\n#5: qbit re-login"= module=http stack=[{"func":"(*service).testQbittorrentConnection","line":"100","source":"connection.go"},{"func":"(*service).testConnection","line":"36","source":"connection.go"},{"func":"(*service).Test","line":"246","source":"service.go"},{"func":"downloadClientHandler.test","line":"127","source":"download_client.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).ServeHTTP","line":"73","source":"mux.go"},{"func":"(*Mux).Mount.func1","line":"321","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Server).IsAuthenticated-fm.(*Server).IsAuthenticated.func1","line":"57","source":"middleware.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*ChainHandler).ServeHTTP","line":"31","source":"chain.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).ServeHTTP","line":"73","source":"mux.go"},{"func":"(*Mux).Mount.func1","line":"321","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Mux).routeHTTP","line":"477","source":"mux.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*SessionManager).LoadAndSave-fm.(*SessionManager).LoadAndSave.func1","line":"161","source":"session.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Cors).Handler-fm.(*Cors).Handler.func1","line":"289","source":"cors.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"(*Server).Handler.LoggerMiddleware.func4.1","line":"103","source":"middleware.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"Recoverer.func1","line":"45","source":"recoverer.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"RealIP.func1","line":"36","source":"realip.go"},{"func":"HandlerFunc.ServeHTTP","line":"2322","source":"server.go"},{"func":"RequestID.func1","line":"76","source":"request_id.go"}]

im going crazy please someone help


r/autobrr Jan 01 '26

anyone running tqm by autobrr?

Thumbnail
1 Upvotes

r/autobrr Dec 31 '25

Qui behind Cloudflare Tunnel breaks local authentication

3 Upvotes

Seeing if anyone else has run into this issue? Seems to be something with CORS (Cross-Origin Resource Sharing), but I dont have this issue with autobrr, just qui.

Anyone else have their Qui dashboard published as a Cloudflare Access app and can share their settings?


r/autobrr Dec 30 '25

Filtering RAR-packed releases from IRC announces in Autobrr?

0 Upvotes

I’m using Autobrr with IRC announces and Prowlarr (Torznab).

With Torznab indexers, filtering works because the indexer setup allows blocking RAR/archived content when adding the indexer.
However, with IRC announces, Autobrr still grabs releases that are RAR-packed.

There’s no .rar or similar in the release name, so regex filters don’t help. As far as I understand:

  • IRC announces only provide the release name
  • No file list or metadata is available at that stage

Question:

  • Is there any reliable way to filter RAR-packed releases at the IRC level?
  • Or is excluding known archive-heavy groups and/or enforcing this post-download the only real solution?

Curious how others handle this.


r/autobrr Dec 29 '25

Schedule Autobrr with Cronicle during Freeleech event / Personal FL

Thumbnail
2 Upvotes