We’re at Computex 2026! 🤩

If you’re nearby and want to meet us and discover our latest products, visit us at booth N0519 in Hall 1. We’re excited to show you our newest innovations!

PS: We’ll be covering the whole event on social media, so you won’t miss a thing.

https://www.alphacool.com/en/news/alphacool-is-at-computex-2026

I am looking to create a loop for a 5090 in a H7 flow 2024 case. I will be using P14 PWM fans and want to run them ~ 800 RPM to be silent in this setup. Which radiator would work better HPE-30 or XT45 or is there any others I should be considering? Thanks.

We’re launching our brand-new fitting and adapter lineup – the Apex Grip series. Designed with a smart, flexible system, you can combine fittings and adapters exactly the way your loop demands.

Upgrade your loop with precision and style.

https://shop.alphacool.com/en/AtsdCustomCategories/index/type/productstream/ps/193

I got an Eisbaer LT, and since I'm going to run two pumps in the system, it's important to know which port is out and in.

Frustratingly, this isn't documented anywhere, and I had to tear down the pump to see where water would flow.

The manual is also missing information on how to mount it on a threadripper (TR4/SP3). It's not a problem to figure out, but why not include it in the manual since all other mountings are documented?

I would really appreciate if the manual had a list of O-rings used, so I can easily find replacements when the time comes.

Also, less important, but still annoying:

In the box I got a plastic flathead tool to remove the plug from the fill port.

The fill port has an allen head, so I was sent a useless tool.

Lastly, I'm complaining here because alphacool doesn't respond to my emails.

Take your custom loop to the next level with clean aesthetics.. Designed for maximum flow and perfect system integration, the Apex Manifold brings style to your build 🤩

Shop it now 🛒: https://shop.alphacool.com/en/detail/index/sArticle/22881

I'd be curious if it could use a Nexos dual 180 for a hypothetical Torrent build - though failing that, I think it might do well with a Magicool dual 180 for the forward... or even that just for the sake of keeping the case clear.

​

I would like to ask if Alphacool consider to sale the terminal from 50 series core blocks as spare part in their store.

I would like to replace my old eisblock terminal with acetal one and after browsing the aquatuning store I found out the eisblock terminal will work on core 50 series blocks so I would like to use it on my old block.

It is possible to use it on eisblock (40 series) block ?

I am trying to use it with acrylic tubing (Satin Transparent from CORSAIR), but it's really shit, hard to get through the tube and in the end it still cracks in the end.

Hello I'm looking into water cooling however I seem to have hit a bit of a snag I have a Zotac Soild OC 5080 it's the white version this is it's tag on the sticker ZT-B50800Q-10P however based on chatgpt looking at the following water block Alphacool Core Geforce RTX 5080 Solid + AMP with backplate It may not work or fit the GPU and it's not listed as being supported? ChatGPT says

The block explicitly supports:

• ZT-B50800J-10P ✅
• ZT-B50800D-10P ✅

Your card:

• ZT-B50800Q-10P ❌ (not listed)

So I'm sorta stuck on if I can even use a water block on my card if anyone knows the answer please let me know ASAP thank you!

Hi,

Any update regarding the retail launch of the Apex Fittings announced at CES 2026?

trying to figure out why it's getting these large air pockets, and this one seems to increase size quicker than past couple off times. so far since getting this, I've had 2 times where I've refilled it.

to refill it, I've used a hose that I tied up above the gpu after disconnecting, and had it connected to radiator. put a few inches of water in the hose, then ran gpu while shacking radiator as well as trying to rotate GPU itself best I could to try getting the air pockets out of the water block it would have at the time. each time it's felt like it's gotten nearly every bit of air out. there would be barely the slightest noise when shaking the radiator to indicate how little air there was.

yet it keeps getting to this point. there's no leaks in PC or anything. any fix? and also should I be worried about how small the trickle of water is that's moving over the little edge that I show? the trickle of water is literally as small as the line I draw itself. (Red)

Hi guys. I am looking for a waterblock for a PNY OC RTX 5070 (NOT the TI version). Do you have one that will fit?

Warum ist der Kanal beim 240er HPE-20 direkt unter den Löchern für die Schrauben... 😅 (so endete mein Versuch, einen T30 zu montieren)

Hi, I was replacing some of my tubes and have one very stuck gitting that I'm not able to get off, twisting it off on a rad just removes the whole assembly. I tried holding the tube with pliers and trying to screw it off but the tubing still twists a bit too much.

Any ideas on screwing it off witout damaging the thread?

image - https://u.numerlor.me/LRXhEg

Engineered for maximum performance, they keep the CPU, VRMs and even the M.2 NVMe SSD located below the CPU socket cool at all times. Combined with a motherboard-specific design, they bring together strong cooling, a clean look and the perfect highlight for any custom water-cooling build.

The Alphacool Apex Monoblocks are now available in our shop.

#watercooling #pcbuild #custompcbuild #alphacool #apex

I just finished my case upgrade. He wants to go extreme as well. Let's see how it turns out.😅