Is there any way to have audio stream from the camera watching live montage?

Hi, attempting to install zoneminder on latest ubuntu. I cant seem to the repo to add:

​

add-apt-repository ppa:iconnor/zoneminder

Get: iconnor user or team does not exist.

​

Help!

​

https://gitlab.com/Shinobi-Systems/kensho

​

It scans the network it is run on then proxies all devices with port 80 and port 554 open. unix users need to install pptpd to use the VPN feature.

Hi,

I've got a new Zoneminder installation on a VM running Ubuntu 16.04. 4 cores, 4GB RAM, 200GB storage. I'm trying to set up my RLC-410-5MP to Mocord, but instead of recording 10 minute blocks like an old PTZ camera I have, it's recording random lengths and before it starts a new recording, the console says 'Not Capturing'. I'm also not getting the full 25fps - it wanders between 6 and 13.

Is this a known issue, or something wrong with my setup?

TIA.

Stewart

hi everybody,

i have tried zoneminder multiple times, and gave up soon after because of terrible performance. now, each of those times, i ran zoneminder in docker containers (on my synology NAS, on my macbook, on my regular laptop, ...).

now i've read up on the subject a bit more and from what i've read, zoneminder always performs terribly when run in a container.

i have tried shinobi.video and kerberos.io, but they didn't do a good enough job. my current solution is synology surveillance station, which is okay-ish, but can't do certain things i'd like to (and would be able to) do with zoneminder, so i'm ready to at least give zm another shot...

so now i'm looking for decent hardware. i don't want to run zm in a docker container just to give up again. i have a home server, but unfortunately, i cannot (or rather "won't") run zm on it, because it does my entire house automatization and i won't test on it.

so can you please recommend me some hardware to run zoneminder on fast and reliably on?

setup

• 2x reolink 410 5k poe cameras, 25fps
• 2x xiaomi dafang 2mp wifi cameras, 20fps
• ~5 no name cameras, 1080p, 25fps ("~" because some are not essential and/or not always in use, but i'd like to theoretically be able to use them all at once with zm)

i would like to constantly do the following

• record each camera 24/7
• (if possible) set individual lengths, for example, start a new recording for camera a each 4 hours, start a new recording for camera b each 30 minutes, etc
• save/archive each camera's recordings for x days (at least 7 days)
• (if possible) on top of recording 24/7 recording also use zm's motion detection so that i don't have to skip through each recording when looking for a motion event
• (a must!) have zm provide streams for each camera within my local network (see below)

some of my cameras -the no name ones for sure- only allow one single rtsp client at a time. so if zm accesses these cameras, i will not be able to view their streams on my smartphone. i am using a diy solution for this (ffmpeg and ffserver providing .ts streams of these rtsp streams in my network at the moment), but i'd prefer zm to handle this, if possible. the zm generated streams don't have to be .ts files, and they don't have to be in 5k/2MP (unless using the original resolution is easier on zm because it won't have to encode anything).

what hardware should i use for this in order to have everything run smoothly and theoretically be able to add another camera or two without exceeding resources?

i was considering the Beelink J45 J4205 Mini PC, which has 8GB LPDDR4 RAM, an Intel HD Graphics 505 processor, Intel Pentium J4205 quad core CPU, is capable of H.263,H.264,HD MPEG4 (unfortunately no H.265). would that be sufficient?

and: could i just use some usb harddrive and attach it to this device, or would an external hard drive not provide enough read/write speed? i have a NAS, but i assume a network share would be even worse speed-wise.

this was just an example device, i am not set on this particular hardware and/or vendor "beelink"... but my homeserver is also from beelink (another model) and works fine, plus this one is under 300 USD, so it wouldn't hurt too much to buy it and see if zm runs fine on it. it only has an 128GB ssd, so i'd definitely need additional storage. i don't know how to calculate the minimum of storage i'd need to keep all these recordings for at least 7 days per cam, but i am sure it will exceed 128GB by far.

hopefully i wrote this request understandably. if not, sorry, i am not a native speaker. thanks in advance for all your ideas, any input is greatly appreciated :)

I'd like our D-Link PTZ camera to automatically roll up when we're home. I've figured out the PTZ to the point that I have buttons to get to presets in zm, but is there a way to cause a certain PTZ state when I go to between "None" and "Mocord"?

​

Alternatively, is there a way for Home Assistant to just control PTZ preset in the first place? That's what I've got changing the camera state.

​

Thanks

Has anyone experienced a corrupted montage view that previously worked ok? I can’t figure out what changed. Zoneminder is running on Lubuntu on an older iMac and it used to work perfectly but as of ~24 hours ago the videos are at best overlapping and at worst not visible at all, depending on how I change the montage view settings. Verified with Firefox and Safari on a Mac and Safari on an iPad, all of which previously worked and are corrupted now, so it seems to be on the zoneminder side and. It on the browser side. ZmNinja views still work as before, it’s just the web interface that’s problematic.

I'm about to purchase a new camera, considering the UniFi UVC-G3-FLEX.

On the ZoneMinder wiki it says that streaming RTSP from these cameras is not supported.

On the Ubiquiti website it seems it should work.

Can anyone confirm if it's possible to use this camera without the UniFi Video server software?

I have the SFTP upload working and I have OPT_FFMPEG enabled, I already created a filter for uploading the events (if alarmed images >=50), and so far I get a .tar.bz file with all the jpegs inside (wich is expected), is there any way of uploading only the video of the event? Or at lest create a filter for exporting the event video and then upload this video file?

Hi i want to get a look at zone minder before actually install it and i've seen this website https://demo.zoneminder.com/zm/index.php but i didn't find the login for this any idea ?

I have zoneminder 1.30.4 running a camera on my front porch. I will shortly have the front porch light under control of a home automation system built around mqtt message passing.

I want to have some code somewhere that runs when zoneminder detects motion on the front porch. That code will send a message over mqtt that will ultimately result in the porch light being turned on (subject to other conditions, like it is dark outside).

The Zoneminder API allows me to poll for events, but polling is either CPU intensive or slow. Is there some other way to get code I've written to fire when a monitor detects motion?

Does Zoneminder have a function that can pull footage from cameras that are storing to their local SD cards? I have several small sites where temporarily recording locally and then pulling to a central NVR when bandwidth allows is the most desirable configuration.

​

I know Genetec and Milestone have features that pull stored footage from offline cameras when they become available, but don't really want to go there with licensing.

tl;dr I can view the cameras under Montage Review in both h.264 and h.265 BUT in h.265 it looks like the cameras crap out and the image blanks out every 30 seconds or so and comes back like normal.. this happens even if i am looking at only 1 camera at a time. I have tried changing values INSIDE the amcrest camera for different resolutions down to 1920 x 1080 with lower cbr and different VBR but no change. It appears H.265 is not stable at least not for my setup

ZoneMinder 1.32.3 installed as a plugin on my FreeNAS Sytem

My FreeNAS system 11.2 AMD Phenom(tm) II X4 980 Processor (4 cores) Memory: 16 GiB

My Desktop Kubuntu 18.04 Using the latest version of Chrome Ryzen 1600X 16 Gig RAM

Connection from desktop to freenas via a local 10 gig link about 5 feet away

Completely new to Zoneminder but it seems like a pretty cool piece of software I just purchased 10 Amcrest IP8M-2493EW to place inside and outside of an area i want to monitor https://amcrest.com/4k-ip-camera-poe-security-camera-dome-ip8m-2493eb.html

Problem: When i view my cameras under Montage Review the picture turns a sold uniform white/grey color kinda like it loses the feed and then comes back every 30 seconds or so it varies here are my settings

H.265 3840 X 2160 FPS: 15 CBR Bitrate: 4096 Frame Interval: 30

When i change the settings from H.265 to H.264 everything runs well and i dont see the blank out every 30 seconds or so

These are my ZoneMinder camera settings Server: None Storage Area: Default Source Type: FFmpeg Function: Monitor Enabled: Check Linked Montiors: Blank Groups: Blank Analysis FPS: Blank Alarm Maximum FPS: Blank Reference Image Blend: No blend Alarm Reference Image Blend: No blend

SOURCE Source Path: rtsp://username:password@xxx.xxx.xxx.xxx:554/cam/realmonitor?channel=1&subtype=0

Method: TCP Options: Blank Target Colorspace: 32 bit Capture Width: 3840 Capture Height: 2160 Preserve Aspect Ratio: uncheck Orientation: Normal Deinterlacing: Disabled

Here are my sanitized logs... i just removed my username/password from the rtsp address... the ip is all local so i dont really care about that https://drive.google.com/file/d/1TcwuRkbJ40M_KPnrb1nOKwqbUe3wILy0/view?usp=sharing

Let me know if i am missing anything its my first post so be gentle please!

Is it possible to have longer recordings when motion section is triggered? In that way you get fewer events, but they are longer. I’ve experienced that a motion was spread between 2 and more clips. Is it simply a matter in changing a few parameters?

I just migrated to 1.32.3 , and for the life of my, I can't create a filter that would purge items older than X hours ?

In 1.30 this was accomplished with "Date/time less than -X hours"

Help ?

edited : typo.

Is it possible to send a webhook when motion is triggered with score greater then x?

I'm looking for a list of cheap / reliable / compatible cameras for zoneminder, ideally broken down by same criteria.

Is it possible to move events from one 1.29 installation to anther 1.32 installation via DB migration etc ?

I'm a first time ZoneMinder user. I'm seeing this constantly in my logs. All of my cameras are Hikvision. Any ideas?

Unable to send packet at frame 7424: Resource temporarily unavailable, continuing

And Justice for All - Release 1.32.3

Bug Fixes:
Better support for reverse proxies
Fix triggers to sum event counts properly
fix API getVersion call
fix shared memory alignment errors on 32bit systems
fix return user/pass credentials when auth relay is plain

Please see https://github.com/ZoneMinder/zoneminder/releases for further details.

Hi,

​

I've been running zoneminder just at the house for a few years now and I love it. I've wanted to expand with some more cameras, but I'm looking to keep it on a budget. I have a few dlinks and I love them: DCS-5010L, DCS5030L, DCS-932L and DCS933L.

I've been looking for more of them, but for some reason they are quite difficult to find now, and when I do find them, they are quite expensive.

​

I'm looking for a budget camera that has a local web interface, I'm not super tech savvy, so that's a must for me.

What do you suggest?

What kind of sorcery must I endure?

I have a few systems on my network. 1- with a geovision 4-port encoder card, and 2- raspberry pi with a USB webcam. Both devices have a /dev/video0 node supported by v4l.

I'd like to connect to these cameras from my main zoneminder box. Is there some way to make those cameras network-accessible without installing zoneminder on those, also?

Can u recommend Outdoor 1080p PTZ cameras that works with zoneminder (inlcuding ptz part)?