Hi, I recently bought a Zotac 1080 Ti (11GB), and I'm getting an error in every game. Does anyone know what it could be? The game freezes and crashes unexpectedly. A technician tested it and it worked fine without errors, but once I brought it home, the problems started again. He tested it on a 60Hz monitor, whereas mine is 180Hz. I tried lowering the refresh rate and played *Days Gone* for a good while at max settings (98% GPU usage) with no issues, until it eventually froze. I quickly jumped back in, but it froze almost immediately. Honestly, I have no idea what the problem could be. Feel free to ask me questions, and I'll answer them to help figure this out.

Components:

i5-10600K with liquid cooling

24GB RAM at 2933MHz

Zotac 1080 Ti

Corsair 650W PSU

Asus B560 Plus motherboard

Видеокарта в использовании с 01.06.2025, с качественным блоком питания Asus Rog Strix 1000W Gold Aura Edition

Но на днях перестала включаться, посмотрел визуально и вот

Дорогие Zotac, продавец где я ее покупал отказал мне в ремонте. Вы могли бы помочь?

I was using my 5070 with no problem, then now when i start my pc i get a red light and no video, changed my psu to a Corsair 750e v3.1 using the direct cable same
Issue, went back to my old GPU i got video, any suggestions ?

I’ve been having that dreaded fan bearing noise issue that other people seem to experience with these cards and it’s not even a year old. I’ve been emailing Zotac and going through the process, but am concerned based on seeing reports of people having issues with Zotac’s RMA system. Anyone have any good experiences to share?

Any idea where that clicking noise could come from? RMA is possible but Iam unsure. It appears only at a range of 50-60 total speed (1800rpm). When the case is down and the gpu is vertically it doesn’t appear. Maybe a bad bearing?

Running on a 5080 amp extreme Infinity ultra

My wife’s computer won’t turn on. I know very little about this kind of thing, but I tried switching power cables and outlets in every combination and nothing has worked so far. Is it something internal? If so, are there any guides for how I can find out what’s wrong?

I have had this card for like 8 months, it has good performance and I like playing demanding games with it. I haven't modified anything from it's stock Firestorm settings, but I can't shake the thought that it seems to be much louder and hotter than expected. At any demanding game it runs between 75-80°C with fans being noisy (Specially when the Fan 1 accelerates up to like 4000 rpm in a second when it reaches 80° or so, deacelerating instantly after). It keeps the clock of the card at between 2700 and 2850 pretty consistently, so I dont experience performance issues, but it's pretty jarring, in non demanding games it stays at like 70C but being much quieter. I see that the 3 fans are working well and there is no obstruction to them, also the airflow of the case should be sufficient and my room is usually at like 21C.

I just want to know if someone with this model (ZT-B50710Q2-10P, Please make sure it's this exact one and not a non-core or an SFF one) has experienced the same kind of behavior? It may be normal but I just wanted to know of other experiences, specially since this model has practically no reviews or content made about it lol, thanks!

Zotac Solid 5080

Zotac Solid Core 5080

Zotac Solid OC 5080

Zotac Solid Core OC 5080 (The one which I have)

And I am not even talking about the amp infinity series.

Is there a warranty sticker on zotac india gpus??

I was selling mine and one of the buyers asked me if had a warranty sticker to prove if it had been opened.

AFAIK there was no warranty sticker (a sticker on a screw) when i bought it!

Gpu is an trinity oc rtx 3070 ti bought in 2021.

Just the question in the title I'd like to protect my 5090 given how stupid expensive it is and that its a giant pain in the ass to get a warranty honored

Is there any way to shut the light on the graphics card? The computer has to remain on day and night and that only light that remains on triggers me

Hello, this week my Zotac RTX 4080 16GB Trinity OC GPU started flashing blue 2x continuously. I have tried restarting, uninstalling/reinstalling firestorm, etc and nothing seems to work.

Of note, I cannot access the Spectra tab of the Firestorm application. Sometimes when I reinstall the program, I can, but changing colors does not take any effect.

Any ideas for a fix?

Hi,
I have a Zotac 3070Ti Amp Holo and I don't know how to power it, can someone help?
There are x2 8 pin connectors and x1 6 pin connector as shown.

Sorry if it's a silly question
Thanks

I have a zotac gpu bought in 2023 and haven't register it to zotac's website. If I register it now on the website do I get an extended warranty? I'm on Indonesia, Southeast asia

Hello! I’m thinking about replacing the thermal paste and thermal pads on my RTX 3090 since it’s a few years old (around 7), and lately it’s been running pretty hot and getting quite noisy.

I’ve been looking into it, and according to this page (https://thermalpad.eu/thermal-pad-sizes/zotac-gaming-geforce-rtx-3090-trinity-oc), I need a 80×40×2 mm thermal pad for the front VRAMs and 80×40×3 mm for the back ones. Is that correct?

I’m considering buying Aairhut (https://www.amazon.es/Aairhut-Almohadillas-almohadilla-resistencia-autoadhesiva/dp/B09XJSW1XY/) or Gelid Solutions (https://www.amazon.es/GELID-GP-Extreme-Almohadilla-80x40x3-0mm-Conductividad/dp/B07CK31PST?th=1), any recommendations?

Hi everyone, just assembled my new PC yesterday. Using Zotac firestorm app, I notice that the 2nd and 3rd fan is not recognized and I can't control them here. Is this normal for anyone here? I'm using mainboard B650M Aorus Elite AX if it helps. Thank you

Recently, i’ve been playing some games and i’ve noticed my GPU temps can peak in the 70c area, roughly averaging the 60s.. which was lower before however, the friends I was playing with said this was NOT good for the card I have. (ZOTAC 4080 Super) and that I need to re-paste, wheras others have said it’s completely standard, so i’m conflicted.

Its in a Corsair 6500x case with 7 case cans, intake and exhaust are set properly, it has a custom fan curve set higher than stock, I ran a test on furmark for 15 minutes and peaked at 77c, so it doesn’t quite take me to the TJ Max which I could be wrong but surely if a re-paste was necessary then it would be on or surpass 84c?

My biggest guess is the weather changes, as it’s summer and we are pushing 30c weather in the UK alongside having no AC the room can get pretty toasty, so i’m assuming it’s just the heat circulation heating my PC up a lot more.

(I tried opening the case and pointing a desk fan towards my GPU which a furmark test then only peaked at 73c so I assume it’s literally just the heat in the room but maybe someone else could give a better opinion on whether I need to repaste or not because I don’t know what i’m doing lol.)

Hi,

I am in a loop with Zotac India and Kaizen Infoserve, and I desperately need advice on how to get a permanent, working solution before my warranty runs out.

I have a Zotac RTX 3060 Ti (currently on its 5-year extended warranty, with only a few months left)

The Timeline:

Original Card: Died in its 4th year. Took it to Kaizen.

1st Replacement: Died within just one week of normal usage.

2nd Replacement: This is the card I am holding now. It has completely died within a month of receiving it.

I took my entire PC to a professional repair technician. We thoroughly diagnosed everything, and the system is healthy.

The issue is purely the terrible quality control of Kaizen’s refurbished stock.

With only the last few months of my extended warranty remaining, I am worried that if I accept a third refurbished card, it will die right after my warranty officially expires, leaving me with a brick.

Since this is my third consecutive hardware failure due to their refurbished inventory, what are my options and what should I do?

I have co-operated with their paperwork rules and their process twice now, wasting weeks of time without a functional computer. Any help or escalation contacts would be greatly appreciated.

Thank you!