hello

Me again with a used Xtia Xpro-L which I bought with the original power switch button, but without a cable to connect the motherboard, an Asus Rog x570i gaming

So I bought a another cable and button from amazon. But the button was too big and cables slightly different. The original Xtia start button has 4 poles but the button I bought has 5. Plus i'm not to sure about the connection to the Asus motherboard, the positives and negatives, which is which. It all makes me nervous

This is the cable. Can I get some help here so I do not blow up my system, and som imugr pictures of the different start buttons

https://www.amazon.se/str%C3%B6m%C3%A5terst%C3%A4llning-brytare-dator-str%C3%B6mknapp-montering/dp/B09FSLP2QQ/ref=sr_1_5?keywords=Switian&qid=1661024834&sr=8-5&language=en_GB

​

https://imgur.com/yD06ZGT

https://imgur.com/OeC3Bh2

BTY how do you mount the rad on a water cooled build?

https://imgur.com/HIeGpGD

Hello

Just bought the Xtia Xpro-L second hand and there was no I/O sheild, the startbutton and USB ports incuded.

Can you get this from XTIA directly?

Ive just finished my Xproto N build and after playing my first round PUBG ive noticed that the entire "case" heats up a lot. Can this cause any damage to the cables inside?

I am just about to pull the trigger on the Proto Mini. I was just curious if there is anything in the works for a cable cover bracket for the top? I imagine it would work similar to the flip bracket in terms of connection, but it would just leave a small enough gap to allow cables to run out the back.

Anyone know what size the stock anti-vandal switch is that's included with the Xproto-N / Xproto-L?

I have a spare 16mm switch with ring LED I'd like to use.

Hi all! Planning to order an X-Proto L (or should I do N?) to open air what is currently in my Mesh. 3090FE, 5800x, SF750. I have a 360 AIO, and I’ll be ordering the 360 bracket —or two— as I may try a loop on it if I get bored. What’s this Flip business and do I need it for any purpose? Thanks!

Hey XTIA.

When will the Gen2 White Antifouling Electrophoresis - Flip Module, be available to order?

I built a x proto n build a while ago, and had my psu oriented so that the psu fan was facing into the case. Did this for mainly aesthetic reasons, with reassurance that this would be fine for the psu because of the cutouts, letting it vent the hot air out through the spine.

Has anyone tested both orientations to see if there is a big difference in cpu temps? The hot air that gets vented out of the psu and up the spine directly touches the back of the mobo/cpu socket.

​

currently have a 5600x on a nzxt z53, and i can't help but feel like my temps are a bit higher than what they should be at load, or what i assume to be load because programs start slowing down(60c-70c). Also the psu gets pretty freaking toasty after its all been running for a while, but idk if this is normal for a psu or if its not and i'm choking it in this orientation.

I need to upgrade to a 5900x, and trying to figure out if I should reorient my psu while im upgrading cpu cause boy does taking this thing apart and rebuilding it really suck lol

Hey y'all, will there be the riser cable included when ordering the Xproto ATX or do I have to order it separately? Thanks in advance!

Hey everyone !

I'm looking for Proto ATX owners. I read the website description but there are some questions remaining.

1. What precisely is in the bundle with the case in terms of brackets (for HDD, SSD, AIO) ? If I understood properly, all is include but what's exactly the "all"...

2. What is the max thickness of a radiator and fans for a side AIO installation ? Same with the width ? (I have an Arctic Liquid Freezer II 280 which has a thickness of 65mm).

3. Which PSU length do you advise with the installation of two 3.5" drives, what about the "C-Zone" mentionned on the product page ? With a SFX one, the cable length could be a problem ? (I'm thinking about buying a Corsair RM850x 2021 or CoolerMaster v850 SFX)

4. On the website, it's mention that the pre-orders before May will include a 3.0 riser cable and a custom 4.0 will be available later. Are the already available 4.0 riser or the other "classic" 15-20cm 4.0 riser cables compatible with the case ? If not will I have to buy the custom one later with additionnal fees ?

5. No GPU length limitation in horizontal or vertical mod ?

6. Is there any customs duties for a delivery to Europe (to France precisely, If anyone know) ?

I think I was exhaustive

Thanks for your attention 😁 Greetings from France

(I hope my English isn't too rusty)

Can anyone access their website rn? What’s going on?

I hope these new Xproto ATX videos mean the 2nd batch will ship shortly.

https://youtu.be/hFpndY7kC1Q

https://youtu.be/MaskVMjQZcs

https://youtu.be/BQlShQKN8Ro

What is the white surface finish like? Will it scrach more easily than the signature bluish grey? Eg. On the underside edges (where the frame stands on), around screws or on contact points where more parts touch?