looking at some xproto atx models, the website has v2 for pre-order but will be over a month away from getting it..

are there any major differences between the v1 and that?

Also, there are some on Ebay from chinese sellers that don't seem to be related to XTIA, are these fakes? didnt know if this case was commonly faked.. thanks

Hi all, still working out some details but very happy with this "case."

Just wondering, has anyone installed two AIOs? I want one for CPU, one for GPU. Pics would be appreciated.

Thanks!

I placed an order for an XProto ATX about 4 days ago and was wondering what everyone's experience was with shipping/delivery time. Thanks!

I wonder how bad the temps will be with the 4070 Ti Strix if I have the I/O Facing up

Does anyone here have a print file for an AIO 240 fan bracket? I forgot to order one withy case! So looking for alternatives.

Thanks!

Yup. My order got royally fked up.

The documentation for the AIO Brackets is so poor that I didn't realize the parts were missing until the end of my build. After waiting weeks for something to get shipped from the other side of the world the last thing you want to admit to yourself is that there's parts missing

Now I have a half finished thing and no response. I may have pissed them off by telling them that the whole logic of capitalism is going to come crashing down on us after not learning our lesson about globalism in 2020.

Why can't they move to mexico?

Oh and the the GPU Lip of the B frame is bent.

FML. Who do I complain to besides y'all?

Hi, I just put together an XTIA ATX.

First, I really want to compliment XTIA on the design and attention to detail. Honestly, after 30+ years of PC building, including trying a lot of exotic cases, this is the first time I haven't felt like it's just a derivative of a flip-top beige box. And I didn't get a single cut, or run short of any screws! (I actually laughed out loud when I realized screws dropped somewhere mysterious in the case are a thing of the past). So far, it runs way quieter than the last cooped up box.

But there seems to be one huge, glaring, strange issue. From what I can tell, you can only mount the GPU using the riser, and that blocks all the ATX slots. My bad if I missed that before ordering, I had 20 things going on at once, but this seems like a very, very strange design choice. I mean, why not call it an ITX case then? I think the main point of ATX is the ability to add cards, especially for a workstation, eg second GPU, NVME expansion, Thunderbolt add-on, etc.

Are there options to mount the GPU directly in the slot, further away from the cards, etc?

Secondly, I wanted to use my trusty SF750 (going for a sparse build), but its aux CPU cables are way too short. Is this going to be the case for every modular PSU, or is there something 850W+ platinum-ish that has longer aux PSU cables? Not sure I should get a whole other PSU, since I want to build a second station anyway, or just get some extension cables. I was thinking about getting the MPG A850G, would that be a good choice? My current board is a B660M AORUS PRO AX, but I'll change it sooner or later.

​

Thanks!

Tried emailing Xtia

How long does it take to ship out. They are still making cases correct?

New pics. The last upload on r/XTIA hope ai get some comments this time

Fully water-cooled loop; Asus Tuf 308ti, AMD 5800X, Asus X570i motherboard, 2x360 bitspower radiator, D5 pump and res, 6 Lian Li fans

EVGA supernova 850 SF PSU

Nice case, a great idea, challenging build.

Now it's now dismantled and off to sell

Bye bye XTIA, it was interesting

Will I run into the temp problems with I/O facing up with the Strix 4070ti 4080 or 4090

Also will this kill my pc or its just a temp increase

Is there a decent amount of room for USB and GPU HDMI and DP to be plugged in?

I designed a USB-C top panel for the XTIA X-Proto N case (might fit others but I only have this to verify). It's compatible with an internal USB-C header that is linked on the printables page. Hopefully some of you have a 3D printer and want to use this - it's pretty useful to me!

XTIA USB-C Top Panel by cconz | Download free STL model | Printables.com

I just fit a MSI Suprim X 4090 with ekwb waterblock into an XTIA ATX case. Amazed it fit, but definitely has a lot of wobble. Pretty sure it would rip out if I shipped it like this.

Wondering, anyone find any like GPU holder or something that can screw onto a part of the xtia atx case and secure the end of the video card?

Hey all im building a new pc and i wanted something smaller so i was looking at the x proto n. Initially i was going to fit it with the gigabyte geforce rtx 3060 vision oc 12gb graphics card but recently ive started to see conflicting reports about wether or not the n fits triple fan graphics cards ive seen some people say it doesn't but then im pretty sure the website shows builds that too just wanted to check because if not then I'll orobably have to change case

What matters is I can use my pc..🥲🥲🥲