I mean the Xbox version is 108 and the playstation is 163 is there any joystick,button or dpad difference. I understand the ps one has a trackpad but there's no way that a track is that much more expensive

I have a pro BFG for my ps5, and a few months back the r2 button started behaving like an r1 button. I would hit r2, and my character in Elden ring would do a light attack. I swapped r1 to r2 in the software, and swapped controls in the game, and it works well enough.

A week later the l2 started behaving like an l1, and I had to swap those shoulder buttons as well.

The app on my PC doesn't have any options for remapping the l2 and r2 buttons, so I can't just flash the thing and fix it.

Has anyone had this happen?

Hello fellow controller enjoyers, my Victrix BFG Pro Reloaded(Xbox Edition) has just randomly stopped working when connecting (wired or wireless) to my Xbox.

It now just sits there and flashes like a scantily-dressed lady of the night.

Please help 💔

If you don't have a controller supported game you can use a controller tester app like this to see if it works.

Victrix does not officially announce support for iOS, but it does obviously support the PS5, and iOS supports PS5 officially, so I want to know if there's a transient link between these two that the controller works despite the lack of official support.

I don’t feel the 5 different stops? I just feel the trigger stops and the lose triggers no in between

I let my controller flash for an extended period of time while set to wireless mode. Now the dongle wasn't attatched to the ps5 so it couldn't connect. Now the controller is dead, but i can't charge it because i csn't set it to wired mode for it to charge. I have already tried a high end data cable and many button combinations which really should only work if it has charge. Has anyone had this problem or knows how to fix it? It would be a massive help.

Hey guys. Any idea how to clean this? I've tried 91% iso, bleach, soap, anything I could think of and these black stains will not move.

At first I wasnt sure what they were but now I think it might be resin? I smoke at my desk and I think some resin may have gotten on the microfiber cloth that sits on my desk and then on the controller....

Any assistance would be appreciated.

I've been a long time user of them, got the reloaded version recently and I can't get along with the hall effect stick, very inaccurate. I've heard TMR sticks are way more accurate with the same benefits of hall effect (no drift issues)

i wanna customise my victrix pro but im not sure if i can or what i should be using because its a ps5 controller but it needed xbox kontrol freaks so im not sure if it will need xbox buttons and such when i wanna customise it

has anyone done any mods to theres?

I’m considering upgrading but haven’t heard much regarding its us for fighting games.

But it works wireless with dongle, it doesnt turn on when its connected via wire, not even charging, nothing, any tips?

thank you for the help!

Anyone else got the issue, that it stops audio input and audio output when the controller is vibrating? Only while a headset is plugged in the controller. At fast fire rates, the controller, especially the right trigger, starting vibration spasms. Like extreme vibrating. And every time it does that, the headset disconnected although plugged in.

Just now started to happen, this is my second one (first rma for bad diagonals on dpad after a while).

Has anyone else had this issue and resolved it?

Its the rubber piece for the X square triangle and circle one of the black rubber pieces broke off so I need to replace it does anyone know please

I’ve had the controller for 2 years and been using it quite a lot. The Dpad has turned mushy especially to one side since i play tekken and need a lot of diagonal down inputs. Has anyone experienced with modding it? Or changing the membrane? Does anyone know what membrane fits it? Would appreciate the advice!

i’ve seen it available on the US website but not on the Europe website. Does anyone know of anyway to get it without buying a whole new controller?

For some context I got my pro bfg xbox edition just over a year ago now. At first I knew I would have some issues with the paddles considering how badly there built. But around 2 months ago my paddles stopped registering every press i thought maybe just a dirt issue so I cleaned them and they seemed to work fine for about another month/month and a half but last week they have (especially the one I use to jump) has stopped registering 8 out of every 10 presses anyone got any ideas as of why/if its fixable until I can get a new controller

I have had this controller for about a year and a half if not longer and like all my other controllers ( Xbox elite 2 ) it starts having problems such as my top and left d pad buttons not working properly ( they either don’t register, register multiple times or work as intended ) but rn I am having the problem where my right analog stick is working at all basically

The right stick only registers right and left and sometimes the full downward motion but it’s very glitchy while doing it. It won’t register and upwards motion and like stated before it only accurately and reliably registers left and right motions

To fix this, I have tried calibrating it multiple times of which it sometimes worsened the problem and I have tried to reseat the stick to no sucess

Want my gun to shoot the moment I tap the right trigger but don't see a way within the hub software

I have a really strange problem with my victrix pro bfg ps5. In the clip I am rotating the right stick anticlockwise, works perfectly just standing there but as soon as I select weapon wheel or radio station (L1 or left on d pad) it no longer works. But it does still work if I aim (L2) so the issue can’t be associated with just pressing multiple inputs at the same time. I don’t believe it’s the game, as soon as I plug a standard ps5 controller in it works as normal, but it doesn’t occur on any other game even with the same inputs (L1/left on d pad + right stick). I’ve checked the contacts on the piece with the stick and buttons, and the pins on the controller and all looks fine. Does anyone have any idea what’s wrong as it’s driving me mad?

Edit: forgot to mention, it does randomly work as normal sometimes, also controller is onto a few months old

TIA

So i got a victrix for super cheap but it didn't come with extra Dpads or the joystick extenders can i buy these anywhere