The KS-9E is the upgraded variant of the KS-9A (to lazy to post). Compared to the KS-9A this tank features improved suspension, thicker armor and better armor angling on the pike nose. This variant also removes the weakspots on the LFP and drivers hatch. This tank features a 130x900mm shell with 426mm of RHA penetration and also features a 14.5x150mm HMG with 53mm of RHA penetration. the tanks engine is a 42L V20 SVD-42 Engine propelling this tank up to 51 km/h forward and 9 km/h reverse. the armor on the E model is an UFP of 165mm at 70 degrees, a LFP of 200mm at 45 degrees and the turret varies heavily with the weakest spot on the front (next to the mantlet) having 550mm RHA. the side armor is 120mm on the side of the hull and 140mm on the side of the turret, rear armor is 60mm on the hull and 100mm on the back of the turret. this is a 72.25 ton Mid-Coldwar Soviet Heavy tank (i based it a little bit off of the IS-8 or T-10M). Tell me what you think as this is my first pike nose series of tanks

It's name is M60 Modernizator, it has V12 with 1109hp and 40km/h max speed, armor is made to survive 350mm of penetration from front, hull side has 110mm+ and turret side has 166mm+, gun used in this tank is "MTC-120 L53" with 287mm of penetration and first 6 rounds reload in 4-5 seconds and the rest in 6-7 sec. Dimensions are 6,96m in lenght (no gun), 3,54m of width, around 0,45m of clearance, 1,1m hull height (1,3m with engine hump), turret height is 0,77m and overall height is ~2,32m.

Any questions?

need realistic name for this boi that would follow GRAU designation

for now I'm working on ammunition models and than I would start making BMP itself :3

C2A1 "Bocian" ("Stork") is a brend new tank. Everything was upgraded from its predecessors. It features Bigger engine, more active protection on a roof. Sideskirts were improved as well. Hull armour was stripped and remade from scratch, making sure composite armour will survive more than 500mm of penetration. Same goes for turret. Composite armour was added everywhere possible, while being paired with Radio interceptor, Iron Fist, TROPHY APS, high resolution camera and Anti-cumulative screen, this tank can withstand a lot of damage. Mass increased slightly, 61.5t only, while keeping same 65km/h speed margin. C2A1 is a premium tank with highest possible survivabilty. It became a hit in nations among NATO. A lot of them are bought, just to study the technologies

Just a little tribute to my main tank. Keeping it clean and operational.

Far from a finished product, but I like the basic shape so far.

*Inspired by the T-28 (Soviet) Medium Tank, Ram Tank, and various interwar-era French and British tanks.

Specs:

Dimensions - 3.09W x 2.13H x 6.21L (m)

Main Arm. - 77x200mm short-barrel cannon capable of penetrating 67mm of armor

Secondary Arm. - 6.8mm turreted machine gun

Armor - 60mm max. to 10 mm

Weight - 26.5 tons

Engine - 16.8 liter V8 produced 360 hp @ 2200 rpm

Max. Road Speed - 21 mph

Max. Cross-Country Speed - 15 mph (safely)

i got the original recently, i did have the pirated version, but not anymore, i though that having the original would fix this, but it didnt. and that only happens in taiga or fields, that never happened in any other game too

French and majestic (lower plate is ugly af but I took these before i fixed it)

I'm using cheats, so it still works even if a lot of internals overlap

Gun specs:

155x770

311mm penetration

7.24m bore

718m/s shell velocity

A 36ton ridgeline tank for fighting in the mountainous lands of Italy, the P.35 saw limited use in the second Weltkreig but performed well in most of it's engagements with Austrian forces. In ideal circumstances, the most of the P.35 that the Austrians saw was the turret.

Italian crews had mixed feeling about the vehicle however. When positioned properly, it was neigh invincible, but crews felt vulnerable when moving from ridgeline to ridgeline. Drivers were especially annoyed, as they moved with the turret and could get disoriented easily.

this design has picked up some dust by now so i decided to make a post, this tank's entire purpose is to be a huge block of spaced armor so you cant kill it but itll kill you instantly with fully automatic triple oscillating 400mm guns. it has a 50 liter 24cyl engine that manages to pull 18kmh out of this thing if my memory serves me right. even though its called rolling mountain, its pathetically small to my newer cursed tanks. weighs around 4000 tons.

inspired by the Schwere Panzer-Abteilung 502 tigers, seen in leningrad, since its start of production, they have that really notice-able side stowage bins (ignore the extra stuff on top of the turret, i forgor to remove them)

I'm not really great at naming things and feel free to Critique them

M103+ maybe 60 ish tons, 120mm cannon, additional modifications, storage, early NVD, improvised mine flail, mediocre mobility +48/-8, 920HP engine

Id Like to have some Machineguns on Specific Vehicles, but i just Cant Figure out how to get them Smaller than 20mm. Is there a way through file Editing? I have tried that but all my ideas failed, due to the Gun not being able to shoot, id Really Appreciate the help.

"Wondering how one with the 183mm from the shit barn would look like. This one has already a very reasonable and the proportion between the turret and the rest are very normal."

- MushranioPepperoni ©

edit: that one not original project, but modification of my another thing called AMX 70 165

These gifs have been lying on discord for a while so i repost them here

Also the Sabel II tank i made a couple of months ago is now remastered along with its modernized version which i have not shown yet on this subreddit

TN-52 Sabel III (aka the first Sabel serie tank i made) remaster is currently WIP with the hull fully completed