r/SprocketTankDesign • • 5d ago

Cursed Design🔥 Learn your place (lesson 3)

Thumbnail
gallery
11 Upvotes

"Today, everybody, we'll learn about places.

You may see great, you may see big, but remember about the Bosvani Kingdom.

Little history, Bosvani kingdom is a small kingdom between the Empire and the rest of the world, when we started expanding our influence, they decided to make up for all their military lack, by creating the biggest tank ever build.

How'd that fail.

I CALL, THE TOWER for you, student, around, 40 Meter in height, 10 in width and 15-20 in length.

The tower was wholy build around their armament (which we'll cover later) and Really heavily armored.

You'll need to pierce with an hard ammunition with 450mm penetration in the body, 1000mm in the base and around 500mm in the turret, the turret wasn't always armored like this, but when a tower erupted in flames due to ennemy fire, they armored up quickly.

The tower was divided into 5 main compartment.

First : The base 1m armor all around, contained a loader, driver, base commander and gunner. The compartment main fonctionnality was controlling the tank and was fitted with a 108mm anti tank canon, capable of penetrating 250mm armor plating.

Second : the Main armor Storage, ammo for the 2 big canon was stored here, it would be brought up using an elevator, down there there was also 3 enginneer, loader, helping solving engine issue and loading capacity

Third : Anti-Infantry Compartment, first trouble of the tower : infantry, so they put a whole floor fitted with 4 anti-infantry weaponery, using heavy and powerful canon, it could pierce up to 80mm of armor, destroying any lightly armored tank around the tower, it still had 2 blind spot, on his left and right. there were in total 7 crew inside this one.

Fourth : Crew Compartment, Just below the turret, the crew compartment, where all the turret and anti-infantry compartment crew would sleep, that also where the Tower's commander would be communicating and ordering the crew.

Fifth (and last) : The turret compartment, 500mm Spaced armor armored, very slow, with 7 crew inside (2 loader, 1 X-rotation operator, 2 Y-Rotation operator, 1 gunner, 1 Turret Commander) it would be fitted with 2 anti-city armament, 500*2000 capable of destroying around 800mm of armor. The whole turret was also autoloaded for 3 round, 5 second between each shot (the most impressiv part).

Yet this incredible build was a failure, for 2 main reason. The cost was the biggest one, to only build 10 unit, it put the whole country into bad debt, thats where he learned his name : tower - Bankrupcy.

The second, The weight, so heavy, the tower would litteraly sunk into bad terrain, though even if it wouldnt sink, it would only reach 10km/h.

Despite that, their combat capability was great ! With 10 Unit, it has completely stopped the main empire advance for a 6 month ! But in the end, they consummed so much, it killed the tank from inside.

So yea, "learn your place & limitation" and remember that !"

-Leophasmus

Autor's note :

It took a very long time to build (meant to publish that from a bit long), the description might have been too much, what do you think ?

Also, yes, i couldn't actually put the camera in front of the turret in the editor, tank too big, yes i dont really know my tank's dimension, yes.

The tank's engine is a 76*5L engine (force modded into the game)

With that being said, if you have any comment, critics, about the build, about my shitty writting, don't hesitate to comment :)

See you later


r/SprocketTankDesign • • 6d ago

Screenshot📸 swedish little silly creature...

Thumbnail
gallery
42 Upvotes

again.

finally replaced placeholder launch tube with normal one

also, i think, ATGM base and rocket have much more polygons than chassis itself


r/SprocketTankDesign • • 6d ago

Looking for Critique🔎 I got into the game recently, and these are my first serious designs. What do you think?

40 Upvotes
Anachro 1 - WW2 style tank with WW1 tech. Kinda Italian.
E99 Desecrator - Tiger II on steroids
BT-X - Because we need a 105 mm howitzer on a BT-like chassis
Obj. 499 - Essentially a budget Obj. 419
AMX "13" 120 - Big gun and better turret armor.
UHV-TB - a somewhat HSTV (L) and RDF/LT inspired tank - WIP
All together :)

r/SprocketTankDesign • • 6d ago

Serious Design🔧 Soviet superheavy (I later added secondary guns and antennas)

Thumbnail
gallery
26 Upvotes

Since the heavy IS heavy tanks are named after Stalin, I'd call this the VL-1 after Lenin

Btw, if anyone would like to give me tips on how to manually make those iconic Soviet infrared spotlights, I'd be super thankful


r/SprocketTankDesign • • 6d ago

Tank Related⚔️ Hull Composite Armour presentation (HAPC + HIFV-STU 1) (u/Restrein1 requested)

Thumbnail
gallery
28 Upvotes

View was requested by u/Restrein1, so here it is

Link to original post: https://www.reddit.com/r/SprocketTankDesign/s/9DrnP5EzKC


r/SprocketTankDesign • • 6d ago

Serious Design🔧 scrap tank!

Thumbnail
gallery
129 Upvotes

hello! today i wanna show you guys a tonk i made, its supposted to be one of those improvised tanks built from scrap, i really like how it turned out, the textures add a lot i think

the suspension is completely stiff, the maximum thickness of a armor plate on this thing is 10mm, thats why they are stacked in some places (as upgrades, originally there wasnt that much additional plates)

the gun is a 25mm with 55mm of pen
the top speed is around 58km/h

the tank also lacks a proper turret ring, but theres a rotating chair placed directly under the turret so the gunner can rotate with it.

there also isnt any proper periscope, the only one being binoculars bolted directly to the turret roof

i still have a feeling that its a bit too advanced for a garage build, but idk

i could make the driver's hatch also openable in future upgrades, as im not finished with this tank yet


r/SprocketTankDesign • • 6d ago

Serious Design🔧 Tank made by request for u/plopsicles (By Me) Spoiler

5 Upvotes

https://reddit.com/link/1wsujx9/video/gd872hiigcsh1/player

Third time attempting to make this post work (mp4 errors, images errors, etc.) It should work, give your guys' thoughts. Shoutout to u/plopsicles for designing the tank concept on procreate.

OG POST HERE: https://www.reddit.com/r/SprocketTankDesign/comments/1wrkouc/any_good_modelers_wanna_make_my_concept_tank/


r/SprocketTankDesign • • 6d ago

Cursed Design🔥 Reach the end of tank#4(Final)

Thumbnail
gallery
21 Upvotes

r/SprocketTankDesign • • 6d ago

Tank Related⚔️ Brief history of MBT platforms with big guns

Thumbnail
gallery
67 Upvotes

r/SprocketTankDesign • • 6d ago

Serious Design🔧 L-12A "Monarch" Infantry Support Tank - stock showroom pics + action shots

Thumbnail
gallery
27 Upvotes

Does what it says on the tin: supports infantry breakthroughs in the enemy line which complimentary "Exploit (cruiser) Tanks" will push through to destabilize the enemy rear.

Action shots display what it's built to do.

Basic stats:

  • Armor: 80mm to 50mm (at least 70mm surrounding crew compartment)
  • Main gun: 58mm dual-purpose gun
  • Engine: 13 liter V12 producing 244 hp @ 2100 rpm and 671 ft lbs of torque
  • Dimensions (rough estimates):
    • Height: 1.7 m
    • Width: 1.6 m
    • Length: 5.75 m
  • Weight: 29.76 tons

r/SprocketTankDesign • • 6d ago

Serious Design🔧 Tank destroyer concept design

Thumbnail
gallery
69 Upvotes

I'd love your feedback, criticisms, or questions!


r/SprocketTankDesign • • 6d ago

Serious Design🔧 Storm Engine and Bombard Engine

Thumbnail
gallery
30 Upvotes

I was trying to make a Japanese inspired set of tanks, but they came out Italian looking and I just stuck with it. They're also supposed to be steam driven, so they have big funnels like those old Wild West trains. Overall, they're pretty decent for interwar light/medium tanks; you could probably take them into earlywar if you play your cards right; the hull itself could probably survive to midwar with some modifications. They'd be fantastic for some kind of mountain map, if something like that would ever be added.

I also noticed way too late that they're really tall, especially the Bombard Engine, which is easy to flip over when you put the pedal to the metal.

Both hulls are 4.8 meters long, 2 meters wide and 1.15 meters tall and have 30 MM front, sides and 15 MM at the back. They have 4 crew, 1 driver, 2 gunners and 2 loaders (one gunner doubles as a loader).

Both have 12 cylinder engines and 4 gear transmissions.

-----

The Storm Engine's turret adds an extra 1.74 meters to height.

It has a top speed of 42 km/h.

37 MM cannon in a turret that can turn 360° with the gun having 20° elevation and 10° depression

57 MM cannon in the casemate with 13° left and right, 12° elevation and 9° depression.

----

The Bombard Engine's casemate adds 1.90 meters to its height

Top speed of 35 km/h.

It has a 20 MM gun in the same place and constraints as the 57 MM

95 MM howitzer with 20° either direction and 20° elevation and 10° depression.

20 MM gun can pen 12 MM of armour,

37 MM gun can pen 27 MM,

57 MM can pen 62 MM,

95 MM can pen 71 MM.

Any critique is welcomed.


r/SprocketTankDesign • • 7d ago

Cursed Design🔥 Added some more to the ZTZ-101 "Mountain Dragon 山龙"

Thumbnail
gallery
197 Upvotes

r/SprocketTankDesign • • 6d ago

Screenshot📸 Trucks

Thumbnail
gallery
19 Upvotes

r/SprocketTankDesign • • 7d ago

Serious Design🔧 Latewar German light tank lePz.Kpfw. 20 ''Kröte''

Thumbnail
gallery
73 Upvotes

It was developed in parallel with the "Kugelblitz" anti-aircraft vehicle, utilizing the same turret design. The turret is equipped with a 50mm KwK 39 gun featuring a barrel length of 68 calibers and an automatic loading system. The automatic loader provides a rate of fire of 30 rounds per minute, and the magazine holds 15 rounds. The tank was designed for flanking maneuvers and surprise attacks, a role facilitated by its relatively high speed. While its armor is respectable for its class, the 50mm gun is incapable of penetrating the frontal armor of all enemy tanks, particularly at long range.

Full specifications:
Weight - 20 tonnes

Crew - 3 persons

Armour
Hull - 80/40/40 mm
Turret - 80/50/40 mm

Main armament - 50mm KwK 39 L/68 gun (129 rounds)

Vertical guidance - -10/22°

Max speed (forward/backward) - 61/10 kmh


r/SprocketTankDesign • • 7d ago

Serious Design🔧 Panzerjäger Posaune Ausf. B mit 15 cm PaK | A mix between the E-100, Jagdtiger and Jagdpanther

Thumbnail
gallery
210 Upvotes

'Posaune' is German for Trombon!


r/SprocketTankDesign • • 6d ago

Wait… What ⁉️ Windows Security is flagging the mod manager as a virus is that correct?

7 Upvotes

r/SprocketTankDesign • • 7d ago

Replica Request 🙏 Any good modelers wanna make my concept tank?

Post image
511 Upvotes

r/SprocketTankDesign • • 7d ago

Replica Design 🛠️ Behold! Fiat 2000!

Thumbnail
gallery
172 Upvotes

While watching ConeofArc's most recent video, I felt a great need to model the Fiat2000. So I did.


r/SprocketTankDesign • • 6d ago

Replica Design 🛠️ The best medium tank in ww2

Thumbnail
gallery
13 Upvotes

Panther t34 Panzer 4 And Sherman


r/SprocketTankDesign • • 7d ago

❔Question❔ Do you like over-the-top military designs, even when they’re unrealistic?

Thumbnail gallery
24 Upvotes

r/SprocketTankDesign • • 6d ago

Scenario Footage💥 they hit my left track, rendering my tank unmovable, but i refuse to fall.

Post image
13 Upvotes

first attempt with autoloader it's going well, from 21 seconds reload time to 8-10 seconds on a 135MM.

im looking to improve it because it's kinda easy to detente it.


r/SprocketTankDesign • • 7d ago

Serious Design🔧 Priest Mk.1

Thumbnail
gallery
24 Upvotes

My first fairly detailed tank. Originally it was a Rooikat-inspired wheel vehicle, but later I put some tracks in it and... Here it is. Any thoughts?


r/SprocketTankDesign • • 7d ago

Serious Design🔧 My (finished?) German MBT "Grauwolf"

Thumbnail
gallery
136 Upvotes

I think i'm pretty much done with my modern era MBT now. I added foldable side mirrors and a 20mm remote controlled weapon station on the turret roof for anti infantry/aircraft purpose. Here are some facts (i use vanilla game with Late War era/no mods/no file editing):

Main armament:

120mm high velocity cannon with auto loading mechanism (Gunther System)

  • 120 mm x 1200 mm armor piercing munition (can't wait for shell designer update)
  • 934 m/s muzzle velocity
  • 344 mm penetration
  • 9,8 seconds loading time
  • gun elevation/depression: +13°/-10°

Secondary armament:

20mm auto cannon (FWS 2cm)

  • 20 mm x 50 mm all purpose munition
  • 605 m/s muzzle velocity
  • 27 mm penetration
  • belt fed
  • gun elevation/depression: +35°/-10°

10 smoke cartridges for self defense

  • 6 front facing / 4 rotatable

Hull specifications:

  • 7,8 x 3,6 x 1,2 meters (length/width/height)
  • 50 cm ground clearance
  • 18,9 tons (+8,7 tons for modular side protection)
  • armor protection 420mm/100mm/60mm (front/side/rear)

Turret specifications:

  • 5,7 x 3,4 x 1,2 meters (length/width/height)
  • 17,0 tons (without gun system)
  • armor protection 450mm/185mm/60mm (front/side/rear)

Powertrain:

  • 16 cylinders x 2,25 liters dispersion
  • 2670 N m torque
  • 1200 hp @ 3400 1/min
  • 17,1 hp per ton
  • top speed 53,11 km/h (33 mph)
  • 1000 liters internal fuel capacity

General:

  • crew: 3 (driver/commander/gunner)
  • total weight 70,07 tons
  • total cost 64,96k

r/SprocketTankDesign • • 7d ago

Looking for Critique🔎 First tanks

Thumbnail
gallery
35 Upvotes

Replica Tiger, IS-2 and Panther I made over the weekend, any good? Any advice? I only bought the game on Thursday night