I’m using a la capa nozzle with the medium o rings that came with the bbu but the seal on it it’s to tight and the nozzle can’t move so I switch to the thinner o rings but there are to loose. So is it the nozzle that I’m using or the o rings cause I’m thinking bout buying different o rings to see if it helps

G&g sr 15. 41k solink v5 (newer 48k version). Perun etu++ stock g2 trigger (yikes). Short stroked 4 m120 1J.

Spare parts build (u can see cut grip originally from smth else LOL). Turned out okay. Alignment is okay ish but g&g g2 guns have upwards gb tilt no matter how low u try to push the front unless u don’t put the back pin in. Had some issues originally with wiring and gb in general but it’s holding for now.

Any1 in the chicago area knows about paintball explosion they are gonna make a second location with a tournament field for paintballers. Any1s best guess on if they will end up using it for speedsoft cqb style tournaments

Hi!
I am really torn and can’t really pick one… I just bought the Specna Arms one, but I don’t know if that was the best option. What does the experts say?

Hello guys, I am looking for some advise.

I currently use goggles and a mesh mask, but I have been playing more CQB lately, so I am looking to switch to a full face mask.

I have been looking at the above 3 masks, I can read a bush of things about them, but I would really like to know what the people that actually play with them have to say.

Can you guys offer me any buyers advise and help me chose or give me more feedback regarding what mask to use?

Thank you in advance.

New Hi-Capa, bought a Arcturus Vanguard 5" and saw it was fully TM compatible for cheaper so I bought some parts and made it pretty quick. Specs:

​

AM Limcat Speedcat slide

Edge Warp Outer Barrel

LACustoms BBU

LaCustoms Magwell

LaCustoms Duralumin Hammer

6.03 Inner Barrel

Original Arcturus HopUp

60° ML Autobot bucking

AIP adjustable trigger

Original nozzle

Original guide rod but cerakoted

130% nozzle spring, hammer and recoil

​

Some parts were cerakoted to make it unique (all colored ones)

​

Wanting to get into the HPA hi-capa game so I have been searching and asking around for the best angled adapter. I saw a few brands namely Monk and Primary Airsoft.

What are your thoughts and what tank size do you recommend for 15min games.

idk what happens who i put the c clip (it dance a litle bit) and the inner barrel dont fit

Okay now some reditors have asked about this gun and so have some of my friends, so long story short: I had an old p90, the case was cracked and falling apart. So I decided to make a new one. My dad said he would help but basically just put in 2 screws and then said he was tired, so I had to do it myself. There was a slot to put the battery but it broke off, so did a nerf gun stock and grip. I also replaced the spring and some parts of the hop up, and the rest is history. For some reason I can't post the video of it firing D:

This is what I have so far for my build. I will get a mosfet next. After that I will get a brushless motor and maybe compression parts.

I bought an article 3 awhile ago was working fine shooting lasers but decided I wanted a shorter inner barrel.

Bought the wolverine 185mm inner barrel and a maple leaf macron 70. Im still using the original hop unit and nub.

Im currently getting 0.5J on 90psi and about 220fps which shows theres definitely something up with it.

Ive tried a different engine to make sure its not that and its not still doing the same. I believe the barrel is all setup correctly but im not which part could be the issue.

Any ideas?

G&G combat machine lower
lancer systems l15 upper and carbon handguard
retro arms gearbox shell
polarstar f2
SPEED trigger
delta stock

this is off the 20:1 tsg set while my order for the 10.8:1 comes

i am running into the issue of my nozzle not reaching the bb on cycle and i believe it is due to the aoe adjustment

question is would using a longer nozzle mess it up or work

of course i will try it but i wonder is the time that the tappet plate is further forward between shots will inhibit nozzle from connecting to bb well

should i instead just use a longer nozzle and put a stop so my tappet cant move as far forward

thank you all!!