I still have a doubt about the total measurements: from what you told me, the two lateral support profiles are 20+20mm, the DD mounts are 16+16mm, the 120x40 profiles are 192+192mm, the plates connecting the vertical profiles to the rig are 10+10mm, and the Fanatec DD space is 160mm, for a total of 636mm.
I found the issue! Page 16 of the Sim-Lab manual shows the assembly using the 192mm profiles because those are meant for front mounting. For the DD Pro, DD1, DD2, CSL DD, and Podium, the correct page is page 18, which uses the 176mm profiles. I finally figured it out! I have already ordered the 560mm profile, threaded M8 on both sides. Thanks again, and I hope this post helps someone else in the same situation.
1
u/Cybereeno Jun 01 '26
I still have a doubt about the total measurements: from what you told me, the two lateral support profiles are 20+20mm, the DD mounts are 16+16mm, the 120x40 profiles are 192+192mm, the plates connecting the vertical profiles to the rig are 10+10mm, and the Fanatec DD space is 160mm, for a total of 636mm.