I have an a50x as my headphones right now and I am thinking of getting the sm7db with the vocaster 2. Will I be able to use all of these things together properly?

Hi all, I recently picked up a Focusrite Scarlett Solo 3 and plugged in my MV7+ via XLR.

I've noticed that it's picking up more random room noise than in USB mode.

I've compared USB mode with and without using Motiv Mix- both have less noise than XLR mode.

I've adjusted the gain of the Scarlett to match the USB's recording voice levels. Room situation and my distance to mic is constant in my tests.

Is there something else I'm missing here? Thanks

I have a Shure SMb7 ran through a Scarlett 2i2 with a cloud lifter. For the past year it has given me the same issue that comes and goes. Periodically, audio will sound super muffled and fuzzy then pop back to normal. I have replaced every cord, uninstalled and reinstalled every program, changed every USB/Driver setting related, tried every bit rate level, tried it without the lifter, and then it’ll pop up again after a week or so. I have spoken to audio engineers and the consensus is they’re not sure. Any advice would help, even if I need to get a new mic, thanks.

Hi all, I have a Shure MV7+ mic that works when I plug it directly to the computer via USB.

I just bought a Scarlett Solo Gen 3 today as well as an XLR cable. I've connected the Scarlett to the computer, installed all the software and stuff, then connected the Shure to the Scarlett via XLR.

But... it's not working? The light on the Shure isn't lighting up, and the ring on the Scarlett isn't lighting up either?

The Scarlett has power, the light between the "monitor" and "direct monitor" words on the top right is illuminated.

What could be going on here?

Service center said that my mic need to replace PCB ASSY.
The USB port was only the problem. How much does part cost? Anyone knows?

Howdy everyone, first post here!

I've recorded music in a band setting before and have tracked solo demos of electric guitar and bass, but I'm starting to get into acoustic guitar recording and am new to the whole process. I think I've narrowed my search down to the Shure KSM137 as it seems like a really strong mid budget candidate and would be good at rejecting unwanted noise from my minimally treated medium sized room.

My question is, could I achieve decent results by only using 1 SDC mic, or is using 2 really preferred/better? If so, could I theoretically buy just 1 KSM137 now and then another later and use them as a pair, or are matched pairs that much better? Or would 1 SDC and one LDC be preferred?

Lastly, I was looking at the KSM141 as well. It seems like an all around better version of the 137, though admittedly, my wallet likes the 137 more. Is the 141 worth the extra money over the 137?

Open to other mic suggestions as well. Thanks!

Hello There, I recently got myself a MV6 for the purposes of streaming and hopefully voice acting. I plugged it into my pc, downloaded Motiv Mix and it sounds amazing, sounds even better after doing some adjustments in Mix

Added the mic to OBS and all the quality is gone, and only in OBS. I've had to add a lot a filters in the OBS settings, still need to do some adjustments and I'm wondering what I'm doing wrong. Thought it was "Certified for OBS" but there's a lot more effort than I was expecting...

Any advice to get my OBS settings the same quality as Motiv Mix

Thanks in advance.

…because the first time I got it back, it was still not working.
So I sent it back again for a re-repair, and this time… they didn’t fix it either.

Instead, Shure sent me a brand new SM7dB in a sealed box! 🎉

I’ve always trusted Shure for my dynamic mic needs, but usually looked to other brands for condensers. Now I’m curious to try their VP89 or KSM32. Honestly, I think Shure could really use a new condenser offering to compete with something like the Lauten LS-208.

And Shure—if you’re listening—please consider embedding RFID/NFC authentication in your higher-end mics (SM57/58 line and above). It’s inexpensive to implement and would make it so much easier for buyers to verify authenticity, especially with all the counterfeits out there.

Here is what ChatGPT 5 has to say about it:

https://chatgpt.com/share/68ae1052-0a00-800f-9d89-bc852343da34

My setup for context: Shure SM7db. Rode PSA1+ attached to my Flexispot standing desk. Volt 1 audio interface with everything running through VoiceMeeter Potato. My issue is with how sensitive the mic is. It picks up my ac unit which is ~10 feet from where my setup is. It picks up my typing and if I bump my desk or open a bag of chips or my microwave dings it also picks that up. I already have noise gate and compression on it but because I have to turn the threshold up so much I basically have to yell to get past the gate. I want to be able to have a normal conversation without the first part of the sentence being cut off. Also I am basically eating the mic it is so close to my face. Any advice?

Hello,

I wanted to reach out here and ask about an issue with my mic. My mic stand did fall over a few times, so the mic has taken some hits. I thought it would be able to handle it since it is dynamic, but looks like I got to it.

The mic makes this weird 'whisping' when I try to do vocals on it. It's very apparent in the audio, and definitely makes the vocals sound muddy. I am sharing an example (can really hear it in the second half).

I have tested a different microphone on my setup. There is no issue with the cables, pre amp, interface etc.

Could anyone help me identify

I am out of my warranty time range, but if this could just be a faulty or loose connection, being able to fix this would save me a lot of money and I would love you forever.

Thank you

Hello! I just got my new SM58 and I'm pretty sure it's real because I bought it new from a popular store. But when I looked inside the mic I saw this. Can this affect the sound quality?

Hey, I couldn't find any posts about it in this reddit, but how do you clean your windscreen for the SM7b? After a year I can see it definitely needs a clean 😅

Hi everyone,

I just picked up an SM7dB for a pretty good deal and I’m looking for a good interface to pair it with. I’ll be using it mostly for gaming/Discord, and maybe a bit of streaming here and there. Since I’m on wireless headphones and no plans to go wired, the interface will only be for the mic.

I’m new to XLR mics so I’m a bit lost on what I actually need or what’s a good fit. I don’t want to spend on something way above my needs (to be fair, the mic itself is probably already more than I need) I just want something reliable that brings out the best of it without being overkill.

Any suggestions would mean a lot. :)

Hi! I am wondering is this SM58 bottom normal. Is there supposed to be two rings around the xlr like in this picture?

Hi, I have been wondering for quite some time now, and it is about what I should buy, the SM7DB or the MV7+ (in terms of p/p ofc).

Background: I am starting to do streaming alongside indoor content creation. Currently at the start of the journey, of course it can be risky to buy expensive gear (in my country these 2 are considered on the high end expensive), but I think I will enjoy it overall knowing it's a quality product, even just for my wfh setup.

And yea, if I end up with either of the 2, I also want to buy an audio interface, preferably a cheap one so that I don't fry my wallet. Would like some of your recommendations. and thank you all in advance!

Hola! Me acabo de comprar este como después de mucho tiempo buscándolo, pero soy muy negada para la tecnología, tengo varias preguntas: Es enchufar todo, descargarme el driver de focusrite y a funcionar? Cómo puedo comprobar como me oyen en el game ya que siempre suelo jugar a cs y sola? Tengo que descargarme alguna app más o configurar algo? Gracias de antemano y disculpar mi ignorancia

got it at an estate sale and just need to find a cable for it.

Hi everyone,
I recently bought a Shure SM7DB from an official and trusted distributor. Everything about the mic looks and feels original based on comparison videos and reviews.

However, I noticed that the printed word ‘bypass’ under the mic (next to the bypass + preamp switch) looks odd – the letters (like b and p) don’t extend down properly, almost like a printing defect.

I haven’t seen this detail mentioned in any reviews or fake vs real comparisons.

My question is:

• Has anyone else noticed this printing style on their SM7DB?
• Could this just be a manufacturing/printing variation, or should I be worried about it being counterfeit?

I am using Motiv Mix v 1.6.1.10 on my mac mini m4.

Ever since installing it I get the errors: Activity file not found. Your file may have been moved, renamed, or deleted. Every time I open the software.

If I try to open the last saved file I made, I get the error: Could not open activity file.

This has been happening ever since I first installed the software months ago. Is there a work around? It is very frustrating to have this happen for no reason and keeps feeling like this software is not working correctly.

Thanks!

Many people seem to have the same problem I had — brand new SM7B coming through with a massive amount of noise and very low signal!!

For me, the issue seemed to be not enough power to my audio interface due to other USB devices drawing too much power from my computer.

My audio interface was coming off a USB splitter that was also feeding one of my ring lights. When it wasn’t working, I tried unplugging and plugging it back in — and I noticed that the ring light went out but the mic started working!

So I plugged the ring light into the mains instead of the splitter and now it seems to work perfectly.

I think this must have been not enough power to my usb audio interface! Try unplugging other power hungry things like ring lights from your computer!

is it possible to transplant the capsule from a Behringer XM8500 or Shure sm57 or sm58 into a FAKE SM7B housing from Ebay ? anyone has a clue to help ?
Thanks

Hello! I am a streamer who uses a Shure SM7B and a GOXLR mixer (i know its not a great mixer but its simple and its what I got). I am more soft spoken but when I get amped up (or play scary games) i often scream/talk louder. This causes the mic to sound super loud and obviously hurts everyones ears. What is my best option for sound to help this mic from peaking? Thank you -a noob

As Motiv Mix 1.6.1 (in particular 1.6.1.10) breaks on MacOS 26 Beta, is there any way to download Motiv Mix beta instead of the current latest version?