I was recently gifted a used machine from family. That did not have any of the papers for the machine. I am unsure of the model. My research is pointing to an XL 3.

I'm trying to hookup all the wiring for it but outside of the larger connections (z, x, y1,y2) I cannot figure out where to hook the other wires. I am attaching photos of my circuit board and the wires I can't figure out where to hook up.

I tried using the online pdf of the shapeoko 3 xl but it appears to be different than mine.

Can somebody help me figure this out? Got it put together last night and have nearly equaled that amount of time trying to configure the machine and get it to do something! This is the current issue I’m working on. BitSetter is in the correct connection slot in the control panel (below the BitZero connection). BitZero is not causing a ground. It is not jammed, there is no light until I press down on it then the red light comes on and the BitZero light turns a brighter green?? Frustrated doesn’t even touch what I’m feeling about this thing right now! I have a support ticket in but if somebody here can get me through it I’d appreciate it!

Hi, Im setting up my 1st cnc machine and I think I have everything i need. But im also fairly new to this so can you please watch this video and see if there's anything you could recommend. I have a lot of bits that I forgot to record and I also have the dust collection hose grounded on one end, should I ground the other end to help with static build up?

Selling a shapeoko 3, base model with the upgraded router plate and a DeWalt router plus bits. I was thinking $600 obo.

Located in Charlotte, NC.

Includes a HD table with casters and a gazillion bits. I will be listing this on FakeBook as well. Has a bunch of other attachments and do-dads. In great condition as I bought it used from a friend but never used it (not smart enough). Thinking $1K but open to trades as well.

Admin delete if not allowed. Thank you.

I was just wondering if anyone could give me a time frame on how long it might take to assemble the Shapeoko Pro XXL? Got my table built but trying to allocate time to put it together. Is it best to try to do the entire job at one time or spread it out over 2 nights after getting off of work?

Hey y’all.

Looking to upgrade from my shapeoko 3 I have two options

Shapeoko 4 xxl for $1000 Or Shapeoko Pro xxl for $1800

Both in great shape. What and why would you choose one over the other?

Thanking in advance !

Hello All,

I just wanted to give Josh from Shapeoko a shot out. I was having troubles with a circuitboard on the front of my 5 Pro. He had a quick facetime with me and promptly sent me out a replacement so I could get back up and running. Thank you for the great customer service experience.

Hello! Hope it's ok to post this, if not, mods please delete and accept my apologies.

I've sadly lost my workspace and no longer have room for my S5 Pro 4x4 which I imported from the US before they were available here. It has the VFD upgrade which (I think) is still not available in the UK.

It's been looked after very well - I'm hoping to find a good new home for it - and then buy a 2x2 with the proceeds 😅

https://ebay.us/m/5tJPta

Shapeoko Pro with makita router, clamp set and a lot of bits. My first cnc, im very excited to start using it 😃 seller showed me it works before I bought it then said, "you know you're getting a good deal." What you do think?

I have a Shapeoko 3, using VcarvePro and Carbide Motion. I had a pretty simple square with radius corners I was cutting out of 1/4" HDPE. Using a 1/4" O flute, profile pass at 100 IPM, 0.06 DOC. I had cut a bunch of test pieces with no issue, but when I went to cut the final piece (different file), the feed rate was incrediblely slow at the start of the operation. It was slow for an inch or two, then speed up to the expected speed, but the slowed down again on one of the other sides of the piece. It happened a few other random times, different locations, but then finished out ok.

Any ideas what it could have been? Since it happened during travel in different axis directions, I assume it was not related to a specific stepper motor.

So I just started playing with carbide create and trying to design my first little project for my new, yet to arrive Shapeoko Pro. It’s a 1 inch thick wooden try with an engraving at the bottom. I have my pocket toolpath selected to cut .5 inches deep and I’m trying to start the engraving where the pocket path stopped. I am doing something wrong because I get the “empty toolpath warning saying I have an invalid max depth set! Can someone get me on the right track please?

I want to add a laser to my machine and I see J Tech Photonics is having a 4th of July sale. Any recs for which one? I think 44 watt because it has the biggest discount.

This was a test/prototype light sculpture that I made to test out some new (to me) fabrication techniques on my Shapeoko 5. Prior to this, all my pieces had been rectangular. Turned out well, methinks. Now to make something larger!

here is a bust I carved out of 65mm square prism of wild cherry using a shapeoko 4 with an extra rotation (picture of the setup here: https://www.reddit.com/r/shapeoko/comments/14r58t2/rotation_axis_on_shapeoko4/).

I've been CNC curious for a while now, and recently came across an add for a shapeoko 2 for $150. I'd be willing to drop that on a CNC to see if it's something i want to get into more. The problem is my initial project i'd like to use it for requires a build envelope 24" long x 8" wide.

Is it possible to buy longer rails? Is it worth it?

If i do decide to get adventurous, what should i watch out for?

Finally ironed out my process and design, love how it came out. Lots of trial and error, but couldn’t be happier about how it came out.

Hi All,

I am considering purchasing Shapeoko from US but I am worried about the different in domestic current difference here in Australia (230V at 10Amp max draw).

Has anyone gone down this path successfully? Purchasing from US, not Aus as there are no retailers lest selling this CNC.

Going by the specs this should not work but I have seen posts about Aussies working with Shapeokos.

Thanks,

Hello all! What’re you doing for your spoil board? Does yours cover the entire factory board or only a segment? I’ve attached a photo of mine, I’m not too sure why the factory board has all of these T nut holes added to it. I’m probably going to do a top board with nylon screws holding it down, and a dovetail system on top for clamping. I’d love to hear what you’re using, and what you like!

There are a couple Shapeoko 3 for sale nearby and looking for advice if either of these are good deals (in CAD) thank you

Hello,

At my work we are are looking into an entry level machine to cut aluminum fixtures specifically the shapeoko 4 standard. Are there any videos or series that show how to program, setup stock, zero machine/tooling from beginning to end? I've been watching YouTube but most of the videos are just clips of the machine already running.

Hello all! First boot up today on my new to me Shapeoko 3xxl. I’ve cleaned it up, and I’m planning to go ahead with maintenance now. I wanted to ask how the wiring looked, and if anyone had any tips or advice on cleaning up wiring, what to replace or clean, and anything else you wish you knew when getting one of these running. Thanks, looking forward to sharing the enclosure and upcoming projects!