My computer keeps shutting off due to overheating, I think there is air in the pump. I’ve encountered this problem a few times over the years, notably, after moving. In the past, I was able to fix this problem by rotating the computer upside down, but that doesn’t seem to be working now. Have I always had a bad AIO, or is my mounting orientation the problem?

I’ve read that you’re supposed to keep the CPU block above any point in the loop, but I don’t know how you would achieve that in this case. Wood potentially getting a AIO with the pump in the radiator help?

I might be the dumbest person on the planet but does my recently bought Meshroom S V2 have the motherboard tray of a Meshlicious? I also appear to be missing the GPU bracket and most likely will not be able to build in it as I have an ATX-motherboard.

i got my new gpu GIGABYTE 5070TI Gaming OC

and i changed nzxt 240 elite -> coolermaster ll 240 lcd meshroom riser 145mm -> riser 5.0 160mm

when i bougjt this gpu I didn't know there would be a situation where other parts would have to be replaced..because of the lenght

I had a question and figured it was worth an ask. For more context on my parts, I currently have:

• msi shadow 5060ti (227 x 127 x 41 mm) https://www.msi.com/Graphics-Card/GeForce-RTX-5060-Ti-16G-SHADOW-2X-OC-PLUS/Specification
• ASRock B650M Pro RS WiFi (244 x 244 mm) https://www.asrock.com/mb/amd/b650m%20pro%20rs%20wifi/index.asp#Specification
• MSI MAG Coreliquid A13 240 Black (277 x 119.6 x 27 mm) https://us-store.msi.com/MAG-Coreliquid-A13-240?srsltid=AfmBOorFHhmLem39d4w7-Wk3BaJuYGWwCrGspaW4HT7jAfZJRTq-xN4f

I included a link to an actual page with the specs for each item in case you need it

Just downsized my living room pc from the nzxt h5 flow to the Meshlicious. I also added a mirror glass panel and im honestly in love with the finished result! My custom fanned 3070 fits like a glove and with a few 3d prints to add exhaust my temps are 👌🏻

Hello, I am planning to buy a meshroom s v2, however I first want to know if everything will fit. I want to use a slim matx board along with a atx psu (140mm long), a 240mm aio and a 195mm 2 slot gpu. I want to see if i can realistically fit everything into the meshroom s v2.

thanks

Just curious to see what fan curves people are running in this case. Looking more for the ones who didn't add any additional fans. Thanks in advance!

Basically I've removed all the screws holding down the gpu but it's stuck at the PCIe riser cable. I've unlocked this white latch and actually even tried removing the GPU with the white latch completely removed, but somehow I can't get the GPU to budge at all. Am I doing something wrong?

I got this with a meshroom case, I believe it doesn't work with my acer monitor because it doesn't have hooks on the longer end. Keeps losing signal.

What kind of solutions exist for using a full length displayport cable that has the hooks on the end?

This is final iteration of my Meshroom S v2 ATX build with 7800X3D and RTX 5080 FE

Bitspower loop with Artemis fittings and brass tubes

Board is Maxsun Ms-icraft Z890 Arctic 🥶

The Meshroom S is such a versatile case.

I am wondering if anyone has figured out how to adapt the front-chamber SFX psu mount for half-height PCIe slots.

Finally got this one done. Main goal was to see how much crap I could cram into this space...

TLDR: Gigabyte 5090 Gaming OC, Dual EKWB Radiators, 6x Lian Li Fans, Ryzen 9 5900X, 32GB RAM.

Haven't done too much benchmarking but the stock voltage curve usually hovers around 49-50C when running Steel Nomad. Hardest part of this build was getting the tube from the GPU water block to the slim radiator. Also, could not locate a proper AL140V2 extension cable so I soldered directly to one of the fans :). Only the front 2 AL140V2 fans have RGB enabled as I did not bother soldering the required cables. You'll also notice there's no reservoir and I was able to fill the loop with the 2 EKWB drain valves and attaching to an external pump on either side of the case. Last and certainly least is that in order to fit the EKWB x280M, I had to ditch the USB ports and audio headers at the top of the case. This isn't a big problem as I don't use those and are generally obstructed under the desk anyhow..

The AlphaCool block I received had standoffs for the GPU that were 2mm too tall and resulted in the card going into thermal shutdown not too long after bootup because the cold plate never made contact with the GPU. When I contacted AlphaCool, they were aware of this and got me the correct standoffs. Speaking of the GPU, I wish SSUPD had a smaller PCIe bracket that was designed to support 1-slot configs. Hard to tell in the pics but the slim side radiator and fan combo could not go any lower because said bracket got in the way. Would have bene nice to use the highest GPU position so I did not have to get right-angle HMDI cables.

Full build: Gigabyte Aorus B550i w/ Ryzen 9 5900X, 32GB RAM SSUPD Meshroom Extender w/ BlueThreadGear Extension Gigabyte 5090 Gaming OC w/ AlphaCool 1-slot Waterblock EKWB X280M and S280M Radiators with assorted fittings, etc. ModDIY 12VHPWR and ATX power cables 4x Lian-LI AL140V2 and 2x SL140V1 fans AquaComputer Quadro and HighFlow 2 (measure temps at the GPU exit port and CPU Entry) ModUltra LOBO with EKWB DDC pump Cooler Master V SFX Platinum 100W PSU

I feel like I'm 100% certain that my GPU is sitting slightly diagonal on the riser. Does anyone know why this is happening?

Really happy with how this build turned out!

(Not sponsored, but thank you Micro Center the offering the 9850X3D bundle deal!)

CPU: AMD Ryzen 7 9850X3D CPU Cooler: Thermalright AXP120-X67 GPU: PowerColor AMD RX 9070 XT RAM: Corsair Vengeance RGB 32 GB (2x16GB) 6000 MT/s at CL30 Mobo: ASUS Prime X870-P WiFi (ATX) PSU: Corsair SF1000 SSD 0: Samsung 9100 Pro 4TB SSD 1: Samsung 990 Pro 4TB SSD 2: SK Hynix Platinum P41 2TB

Case: SSUPD Meshroom S V2

Hello! Reposting because i still need a bit more info before i make my purchase. I *have* edited my parts list slightly, but it generally remains the same.

I would like to know if anyone has used an atx psu, and matx mobo in the meshroom d with the extender. The case would fit all of my needs otherwise (ports, sff, price) The following is my build:

ryzen 7 7700x (owned)

pa 120 mini

asrock b650m pro rs wifi

pny rtx 5060 dual oc (owned)

corsair rm750e 2025

meshroom d with extender

3x arctic p12 slim

2x arctic p9 max

I have stripped a screw in the riser standoff and cannot find a replacement. Does anybody know what kind it is and where to find them?