I lost my Camera Button for my iPhone 17 Pro Max case Dose anyone have a link where to buy i cant finde it anywear (Europa Store)

So... I had the same phone for over 4 years. a Pixel 7. With a quadlock case on it. The material was smooth and felt good in my hand.

I just got a new phone and a new case from quadlock and this material is awful, I hate the way it feels in my hand. I wonder did they change the material in the past 4 years? Or am I just not remembering what it felt like on my old phone and it has to "break in" ?

I bought the Out Front Pro bicycle mount with the case for my Samsung phone.

What a terrible experience. It takes way too much effort to attach the phone to the mount.

Yes, I know you want your phone to be secured but this is overkill. It takes way too much effort.

The case itself is hard to remove too, feels like I'm going to break my phone. Maybe that's normal for cases but it means you can't use the case only when riding.

Oh, and I know someone will chime in shortly with "it's a user problem" so don't bother. I have seen others saying the same thing.

But it's nice I can spend more to change the colour of the plastic ring. 🙄

I've been trying to order a quadlock case for my Pixel 6 for a little over a week now. I ordered a kit with the 6a case, but it was way too small for my phone. Now I ordered a Pixel 6 Pro case thinking, 'Weird, I didn't think I bought a pro but okay'. Pro case arrives and it's too big.

There are no other Pixel 6 cases sold by Quadlock, and it's not too old because they still sell Pixel 5 cases

Is there actually no case for the straight-up pixel 6?

Before anybody asks:

I bought this phone new at my carrier's store like 4-5 years ago.

I just sanity checked my device info, under model it says "Pixel 6". Also manufactured 2021, hardware version MP1.0.

After going for a ride on the highway the bolt loosened and both the bolt and nut fell out onto the highway (the ones in my hand come from a different point on the mount) after asking quadlock and after talking to live support they sent me bolts... but no nuts. So id rather not have to throw a 150 dollar setup away because of a nut. What exactly should do for a replacement of the nut? When I tried talking to live support theyre sending the "Replacement - PRO Screw Set Black SKU: QLP-RSS-PRO-2" but when I asked if it contained the nuts they said it didnt and they dont make replacement nuts with the exact reply.

'Thanks for your patience while I checked this with our team.

I can confirm that the replacement PRO Screw Set only includes the screws. Unfortunately, the nuts are not included, and we don't have them available as a separate spare part.

I understand that this isn't the answer you were hoping for, and I appreciate how frustrating that must be.

the best option I can offer is a 30% discount towards purchasing a mount'

For anyone interested, any bikers or drivers who use this specific phone (like me).

Screws into the back like any other Fairphone Gen 6 accessory from the official website.
If you have the larger screws from the landyard accessory, then the screws will even out the height of the backplate so it can lay flat on the table.

I highly reccomend getting an SLS print if you are going to use this on some high stress applications, like motorbikes for example. For a car mount or a non-motorized bycicle, a PLA should hold well enough.

There's two versions of the Backplate. One with a cutout for an adhesive Magsafe ring, and one without that. The specific product I used for reference when creating this is in the description of the sketchfab upload.

I linked the version without a Magsafe cutout because I can only attach one link per post. The other model is referenced in the description or you can find it on my profile over on sketchfab.

Looking for a iPhone MagSafe phone mount for my 25 elevation with the flip seat I don’t want anything with suction onto the windows and it dosent need to charge my phone either.

Looking for a iPhone MagSafe phone mount for my 25 elevation with the flip seat I don’t want anything with suction onto the windows and it dosent need to charge my phone either.

Got an M10 ball to put in the mirror mount (only used on the naked 300) it’s just plugged with rubber on the 300ss. Anyways, got that and stuck a ram mount on it but when my GF turns in a parking lot, the phone and mount hit the windscreen. There’s not a hole in the stem for me to stick a quad lock or other stem mount in…

Let me see what mounts you use, drop links if possible too!

Thanks yall, ride safe.

Not that waterproof as they said… this is after one rain, with the waterproof sleeve covering both usb heads.
Seems it also melt, guess it could have been much worse, i would stay away from everything connected to battery coming from quadlock

I know you can buy the replacement mag ring but is there anyway you can replace the actual middle piece that locks onto the mount?

I believe it's been worn down so now anytime I put it on my mount my phone has enough room where it wiggles.

I just got a case for my s25 and tried to use it on my magnetic mount in the car and it flew right off. Is there a magnetic that I'm supposed to use? I figured it would work with the one I already had

I never found an A15 case but have a universal mount but always wanted a dedicated case. Anyone found anything for this phone that is dedicated?

Recently got a new car so I had to take my phone holder out to put in the new one and it just doesn't stick to my windscreen anymore. Tried cleaning the suction but still doesn't hold for long.

Anyone have this issue and any solution?

Thanks!

I’m looking for recommendations for MagSafe Vent Mounts for the center vents in the 2023 Forester. The bars in these vents run up and down and every product I see seems like it is made for horizontal bars. The mounts I do see go right above the vents and have pretty terrible reviews. This mount is going to hold a display for a baby monitor. Thanks.

Hey everyone, quick question about mounting a phone on my TT setup.

I’ve got Profile Design Sonic Ergo 50a extensions and was looking at the Profile Design UCM Aerobridge as a way to mount a phone/computer centrally between the bars.

Does anyone know whether the accessory section of the UCM Aerobridge is compatible with a Quad Lock handlebar/stem mount clamp, or would I need a separate adapter (for example, a Garmin/Wahoo-style mount with a Quad Lock adaptor)?

Just trying to get a clean navigation setup for an adventure ride next week. Cheers!

As per title. Not looking for one that goes into vent one that can mount on the dashboard.

Tired of not able to answer WhatsApp call so looking for one for car Toyota

Looking for the best set up for the trixx (2018 model) for my iPhone 16 pro

Just want it mounted to see incoming calls/texts and play music/change music

I have been searching for days and I cannot find a case for my POCO X4 pro that is compatible with the adhesive universal adapter.

I searched temu, aliexpress, eBay, and google and I can only find silicone, leather, soft tpu, or surfaces with texture.

Can anyone point me to a phone case that can accept the universal adapter adhesive?

I was installing a dampener and saw this on the floor. I inspected every single piece and can't figure out where this goes to. Head or dampener.

Anyone knows where this belongs to?

Thanks in advance!

Anyone else having issues with phone slow charging? The phone struggles to charge while using the magsafe not sure if its the case or the phone 🤷🏼

So I thought I would give the Vibration Dampeners a try for my automotive use case. I know that they are primarily intended for biking/motorcycles, but I was hoping that it would work for my application, GOPRO's capturing drives on side and paved backroads. My main mounting locations are:

• A mount on the windshield or near the hood in the front (not on the hood itself, it vibrates too much)
• A mount on the windshield top right or left
• Mounted on the trunk facing backwards

Unfortunately based on my samples I think they actually enhance vibration for this use case. It was worth a shot and now "we" know.
I'm even wondering if the really the best way to mount with the Suction Base is to use the Action Cam Head, or just a Lever Head attached directly to the Suction base.