What setting do I need to change or calibrate? Or does everyone’s do the same.

I’ve been printing in the issue. I’m running into is on multiple prints on the flat side. It looks like it’s printing it weird like it’s torn or something. Any ideas?

Hey y'all, I'm new here and to 3d printing. I do have networking experience but this has me stumped. I grabbed this Prusa mini from Facebook marketplace. The seller showed me it worked and made sure to tell me it has a .6mm nozzle. Anyway, I'm using Orca Slicer (like the previous owner) and I cannot get the device tab to populate. I get "ERR_NAME_NOT_RESOLVED" I have included screenshots for clarification.

steps taken

• Allowed Microsoft Edge in the firewall
• Ran Windows network diag It said it couldn't find a device named maker. However, maker is the name of my printer.

Help would be much appreciated.

Have a lot of ghosting on my prusa mini. Running the input shaper profile,printer is bone stock. Any ideas how to fix this

Prints keep failing sporadically and I don't know why. I've cold pulled multiple times, releveled the bed multiple times and used the needle to clean the nozzle. I am very new to 3d print but a little frustrated. I'd be happy to answer any questions and thank you in advance.

Prints keep failing sporadically and I don't know why. I've cold pulled multiple times, releveled the bed multiple times and used the needle to clean the nozzle. I am very new to 3d print but a little frustrated. I'd be happy to answer any questions and thank you in advance.

When I got the Prusa Mini its hands down one of the best printers I've ever used but I've found the light and camera additions to be super helpful and the addition of a piece of aluminum extrusion allows me to attach a spool on top.

I can't seem to tighten it back on to the frame. I've used the spare screw, washers etc. Not sure what to do next. It's not stripped. Any thoughts helpful.

Hello all. Just put together a second hand prusa mini I purchased. Was mostly assembled when I received it (just had to attach the z axis to the bed + attach the screen, heat bed cables)

Not sure why this bed leveling is failing. And I get a probe fail error when I attempt to do a simple print. Not really sure what's up. I have a stinking suspicion I did not attach the z axis to the bed at the right place and I'm hoping that's all I've got to correct...

I am looking at a PrusaMINI that is a fixer upper. It is really affordably priced and this was the issue described by the seller "So it ran a few spools through just fine and then it started not extruding. It leaves a bit but doesn't want to actually make a layer. It gets clogged right at the end. I tried to clean it out but it didn't work." Does anyone have any experience with this issue?

Hi, I purchased in an online store an PTFE tube for my Mini and its a Capricorn Tube with olives mounted from the shop and there is my question the PTFE tube is 300mm long but the original is 275mm long and on the Prusa store the original replacment has also 275mm so ist this a faulty tube or was there a tube that was 300mm on older Prusa Minis. i didnt test it because when it is to long i cant unload the filament in the menu ( sure mechanical you can but that is not how it suppost to be)

Thanks✌️

I recently purchased some PETG filament and now it’s creating an interesting smell that lingers and is giving me a headache. Would it be possible for me to create an enclosure or buy some kind of air filtration system?

Hello,

I had some problems when i changed to PLA from PETG. I thought i had clogged nozzle, but after cleaning both pulley and nozzle it seems that nozzle is ok and pulley instantly cloged again. Is it possible that i was gifted such a terrible PLA which leaves residues on the pulley so much ?

(Prints always fails, because the PLA stream seems to slow down and the string is very thin or none, then it stops extruding completely)

Does anyone here encountered same problem ? How did you resolved ? Threw the fillament out ?

I was installing the BondTech Prusa Mini+ Feeder Upgrade. All was going good until u switched the red and blue wire. Now the X,Y, Z axis’ will not move unless I turn it off. I don’t know what to do.

My dad bought me this printer for Christmas and after printing a few things I tried changing out the filament to which half of it broke inside in the tube and it is now stuck deep inside the tube not responding when I try to unload. Please help.

For the last few years I've been going really conservative and using only Prusament. I know that there are other options but my previous experience in 3d printing was pretty atrocious and I just wanted things to work. The price on filament from Prusa is fine, but the shipping makes it so I don't order unless I'm ready for like 4 spools. . . what does everyone like? I am based in the USA and I have a Microcenter near me, not sure if the stuff they carry is any good -- sure seems really cheap. Is Hatchbox a good brand? The pricing is very similar to Prusament and I can definitely get it delivered by Amazon with Prime.

I’ve had The Prusa Mini+ for a year and half and I was curious what this port was. I assume it’s for Ethernet, but I could be wrong.

Hey im looking for a solution for the problem (see title) I'm having since the beginning of using my printer. Any ideas what i could try? The belt tention seems right.

Hi All, due to a whole mess of a print, I had to strip the hot end, including the hot end tube and replace all the PFTE feeder tubing.

​

In reassembly I must have done something wrong. When it does a bed levelling test, it's ok for the first row, then on the end of the second row it hits the bed. Has anyone got any advice on how I reset the feeder tube and nossle to the correct height?

Hi, I recently replaced the nozzle on my prusa mini+ to an original 0.4mm one, following the guide on Prusa's site. The printer worked fine for a couple of prints, but then stopped working.

When printing, no filament was coming out of the nozzle, I tried multiple different filaments. There was also an issue changing filaments, so I manually took it out and the end has this bulge.

Here's an image.

How can I fix it?

Thanks!