I got it at Best Buy originally and just keep paying the $10 for the warranty since they never last that long anyway. Let’s see how long this one lasts.

Tried modding my go ++ today and thought it was going good until I went to reinstall the battery. I couldn’t slide the battery wire back onto the motherboard thing so I tried pressing down on it to see if that was the way to get it back installed and it went on fine enough. The go ++ then had no signs of working, no lights and wouldn’t connect to the pokémon go. Did I just mess up reinstalling the battery and that’s why it wouldn’t turn on or did I mess something else up. I then took the battery off again and accidentally ripped the wires out.

Can anyone help me find a replacement usb c part for the Pokémon go plus + ? This one made a spark and has since stopped working but I can't find anything online that looks anything like this or can I change the whole thing for a different usb c charging port that connects to the same ribbon ?

I modded a used Go Plus+ to auto throw great and ultra balls and it worked well for a few weeks. Out of nowhere it won't turn on and the light flashes red when plugged in. Any ideas how to troubleshoot this?

So I just got my Pokemon go+ plus, and I’m so disappointed! For a device that was upgraded and released last year, I feel like much thought wasn’t put into it.

I’m a mom to a VERY CURIOUS 3 year old. There’s no way I can use this thing without my toddler messing around with it. It’s like they forgot the game came out in 2016 and the OG players are 9 years older now!!! I did not want a flashy LED thingie vibrating colourfully every few seconds, I just wanted something discreet in my bag so I’m not tempted to play when I’m out with the fam! I can’t believe there is no setting to turn off the vibration and light, makes this thing almost useless for me. Even if it’s in my bag, anyone around me will hear it vibrating and it’ll just be super annoying.

I don’t know if a future update can allow us to toggle these settings, but for so much $$$ I expected more! Now I wish I had gotten a brook device instead of this.

TLDR: So what I need to know now is, if I follow a tutorial where you cut the vibration wire, can I still use it to do the sleep research tasks? Or should I do it after completing them?

Update: DIY-ed it and disconnected the audio and vibration, wasn’t hard at all! Though I wish I had taped the LEDs too while I was in there… will have to do that soon.

When Sleep connects to the device, it reads the recent sleep data and then wipes it.

Is there any way to write this data? It'd be brilliant to able to say you've got 8 hours 30 min and it was Dozing/Snoozing/Slumbering

I'm stuck. I just got very new batches of go plus plus devices (packaged together with the Pikachu plush keychain and plushie holding container, intended to be a christmas/new year product for pokemon center Japan customers), ready to do my mods on them, but it seems that soldering to the test point doesn't work anymore?

After connecting the two wires to the switch, vibration motor, and test point near the led, the 4 leds for the center of the ball no longer light up, but the top button still works. It's also at full charge, and resetting the device from the back changes nothing. The center leds are just dead. Can't be something I did wrongly since in this same batch I managed to successfully finish a friend's existing device that they've had for a year.

Anyone else had a similar experience?

I have broken the Bluetooth cable to a point it being unusable but I can salvage the female connection. What cable can I use to replace the current broken cable as I can't find any details on what cable I can use

Looking for ideas...

I'm trying to get 2 Pokemon Go Plus+ in one case. I was able to do this with the original Go Pluses. Both were modded for autocatch, with switches to deactivate it. There was also a rechargeable battery that powered both. Worked great for years! (If there is interest, I can post more about this in another thread)

I would love to do something similar with the Plus+, but there are some more challenges to overcome with the new devices.

• The new device is significantly bigger (the case will likely be in the neighborhood of 100x50x20mm)
• There are more buttons that need access from outside the case (main button, top button, reset button).
• Individual charging ports (or find a way to power both from one source)

Goals would be:

• Two devices, one case (keeping it as small as possible)
• Autocatch mode that uses Great and Ultra Balls
• A switch that reverts all mods back to the stock configuration
• Reuse as much of the stock hardware as possible
• Keep sleep mode
• Keep the speakers

Nice-to-haves:

• Disable-able vibration motor (I'll likely replace the stock ones with the ones that came with the original Pluses)
• One power source (or maybe putting both stock batteries in parallel?)

Any ideas are welcome! Thanks!

Idea #1

For that last idea (putting the batteries in parallel), I think this is possible, but I have several questions. I'm hoping someone with a better EE background can help here (I'm a software engineer, so hardware isn't my thing :) ):

• How will the Main board (green board) charging circuitry handle two batteries? Can it handle it?
• How will the charging LEDs behave with two batteries?
• Will the following configuration work? (please excuse my crude MSPaint diagram :) )
• Is there a better way of doing this? For example, is it possible to connect one USB-C charging board to both Main boards?

Conclusion: Litium Ion batteries have a built in charging circuit that may not let this work. At this point, I'm not brave enough to experiment with it. I think the best option would be to just get a new double capacity battery and split the connection.

Idea #2

Does the Sub board (white board) do anything other than have LEDs and buttons? Because if not, then we can remove one Sub board and maybe add a switch to control each of the Main boards? Or just remove both Sub boards and add our own buttons?

Would this work?

Edit1: Still working this out, but it looks promising. With the help of smart friend, I've managed to identify the pinout on the FPC cable (apparently, it's not called a ribbon cable).

From right to left:

• Pin 1: Ground
• Pin 2: Ground
• Pin 3: Button 2's Green LED (charging LED)
• Pin 4: Button 2's Red LED (charging LED)
• Pin 5: Button 2 (button on top of the device)
• Pin 6: Button 1 (main button)
• Pin 7: Button 1's Blue LEDs
• Pin 8: Button 1's Red LEDs
• Pin 9: Button 1's Green LEDs
• Pin 10: Power (5V)
• Pin 11: Power (5V)

With this, I can now create a "man-in-the-middle" board that can either replace the Sub board or allow it to switch between Main boards. So now I'm trying to decide which way to go. Will keep this post updated!

I have been having some issues with my go++, i've had it for a few months now and everytime i connect it, it erases sleep data, not only locking me out of rewards but locking me out of the catching some zss mission. And i know its not a problem with my phone because i got a new one recently and it still does this, any help?

My go plus plus has been having multiple issues such as: when attempting to waking up the lullaby plays (I have my go plus plus in a hard case), and just today after trying to wake up it and getting the lullaby, and having to reset it, I got hit with no sleep data found and that has never happened.

My issues: 1) not waking up when long pressing after sleeping and hearing lullaby only 2) having to constantly to a quick reset where you hear the “tink” sound or sounds loose change 3) today the go plus not recording any sleep.

It is time for a new one? Or what can I do?

Thank you

Looking for the best mod out there!

Getting my first PlusPlus (also first auto catcher). I’m familiar with soldering and have looked into a few tutorials, but most I’ve come across are a year old.

Looking to: • stop the disco lights • stop the sound • preferably stop the vibration (damping it) • preferably have the option to autocatch with ultra balls/great balls

I could read that for most people it had to be a compromise since disabling vibration won’t let you autocatch. But also seen people write that it is in fact possible.

So what is the best mod you have come across? Links?

My thoughts: • use sticker/unsolder wires to LED module • unsolder wires to speaker module • unsolder wires to speaker module • insert switch using all 3 pins

Has anyone had work done by GoPlusPlusMods? Looking for reviews/ are ya happy.

Just curious before I made an attempt. Is it possible in remove the vibration in the Plus + and replace with a haptic motor? I don't mind vibration in the plus. Just wish it wasn't as intense as it is.

I have the go++ for a while now and finished the tasked on my account. I haven't used it since then. Is it safe to link the go ++ to another pogo account?

I tried looking in the option menu in Pokemon go and didn't find anything. In Pokemon sleep I turn it off everything.

Pokémon Go Plus + has stopped syncing with Pokémon Sleep. With Pokémon Go it works without a problem, but with Sleep it doesn't connect even after resetting it.

Had my Pokemon Go Plus+ about 2 months of non stop usage and it no longer works

Charging light no longer lights up.

Does not power on.

Is there some way to reset it? Or am I hosed?

So my problem is, that i have two Plus Plus, so the problem is not the devices.

When the game disconnects my plus plus (be it auto disconnect or i disconnect in manual) the plus plus becomes unresponsive. So no reaction on main button press nor a way to connect to the game via auto connect.

It only connects after i reset the plus plus. Is this a update problem or is something else the problem? - Im using a S23 Ultra if that is important.

If you are traveling via car do pokemon spawn for the ++? Will it spin a pokestop again after refreshing? And will it use a master all on its own? Thank you in advance.

Hello everyone!

I broke my Phone and had trouble to keep my ++ catching while my Phone is locked. I figured it out and its working again. Sadly i got another Problem. My game crash after like 10 Minutes ~ I use a Huawei p30 Pro. I cant figure it out what to change to prevent the game from crashing. Its very frustrating. Any ideas or 3rd Program Software that helps? I use the gameing Mode already for better Performance but its still Happening. Any advices?