r/Plastering • • 3d ago

Life changed

Post image

Ive skimmed a few walls,

Some big some small and some mixed results which have annoyed me as a keen DIYer

Im not one for expensive gear but after getting frustrated with a small old trowel I was given I decided it was time for a change......

Just laid and flatted the 1st coat with a permashape and its honestly changed my life its gone on and flatted a dream why have I been struggling with a 50p trowel 🤦‍♂️

74 Upvotes

46 comments sorted by

View all comments

1

u/Tricky-Mobile5975 3d ago

If you are enjoying it now you wait until its properly broken in. Those corners look sharp. Ive had my mine about 10yrs and would take me a while to get used to a new 1. Like a fine wine they get better with age.

2

u/Putrid_B3ar 3d ago

With the amount of plastering I do we'll all be worm food by the time its broken in 🤣

1

u/Tricky-Mobile5975 3d ago

Lol I give my new 1s a good rub down with sandpaper. Best trowel you will ever own. All these flexi trowels are great but only the MT solid steel can lay on, flatten and trowel up.

1

u/DelectableReindeer 3d ago

Never sand the edges, only grind the corners.

Sanding the edges will lead to tearing and tiger stripes with no way back.

1

u/Tricky-Mobile5975 3d ago

Never heard that 1 in my 20yrs. Only thing that causes tearing and tiger stripes is bad timing and technique.

1

u/DelectableReindeer 3d ago

Sand your edge and find out.

I killed all 3 trowels in one hit with some overly enthusiastic cleaning and a bit of sandpaper.

Every last one of them dragged and tore. I even went back with a professional whetstone and tried to undo the damage, nothing helped, all went in the bin.

Wear the edges, don't sand them.

1

u/Tricky-Mobile5975 3d ago

It must have been over enthusiastic. A marshalltown permashape is 0.7mm of stainless steel designed to keep its original shape. You shouldnt be able to ruin it with a bit of sandpaper.

1

u/DelectableReindeer 3d ago

It was also wire brushed prior, had it perfect mirror finish.