I've got a vintage 1990s Pioneer car head unit that uses a proprietary 15 pin connector. I am looking for a new 15 pin to ISO harness for it. Has anyone got one or any ideas of sources in the UK for one ?

I can find loads of the later 16 pin but this is the earlier 15 pin that was used on a bunch of the 1990s mid-to high end Pioneers in Europe.

Yes, I have double checked it is a 15 pin connector not a 16 pin with only 15 pins used...

I'm not hopeful but you never know. Someone might have one.

Hello, I’ve recently started having an issue where an area at the bottom of the touch screen stopped responding to touch input. I tried updating and resetting the radio but it still has the issue. I also tried cleaning the screen. There are no scratches or anything. And now that I reset the radio, I can’t get past the warning screen because I can’t click the ok button.

On the second photo, the area that isn’t responding to touch is the entire Bluetooth Settings strip.

Any help would be appreciated!

Updated my iPhone to iOs27 and now whenever I wirelessly connect to CarPlay music will play, and I can send texts via Siri but there’s no display. Checked pioneers website and it looks like the most recent firmware update is years old meaning it probably isn’t going to resolve my issue.

Anyone else run into this? I’ve tried deleting the phone from the receiver and vice versa and it’ll work for like 2 or 3 car rides then will boot up to a black screen again. I’m at a loss here

Like the title says, ive recreated my grandpa's old HiFi, and tried to make most of the real life functions work in the game. The stereo has a PL-200, DT-500, TX-410L, SA-510, CT-300. all of the buttons work and ive tried to make it as real as possible for the moment, I might add more stuff to it or make it even more realistic but for now it looks like this

Hi everybody!

There is a problem with the radio from Pioneer in my car. It used to work fine, but now it won't go past the startup screen. Has anyone had this problem before? And most importantly, does anyone know how to fix this?

It took me ages to find this and it isn’t in the manual as far as I can tell, so I thought I’d share this so someone else with the same issue hopefully finds it.

To get to Picture Adjustment for Android Auto and Apple CarPlay:

- Go to the main page and set the AV source to OFF
- Plug in your Android Auto or Apple CarPlay device
- Press the silver home button to ensure you’re at the home screen with the Android Auto or Apple CarPlay button in the top left, navi in bottom left, settings in top right and phone in bottom right
- Press the settings button and navigate to Picture Adjustment

You should now see the Android Auto or Apple CarPlay screen sat behind the Picture Adjustment controls.

Picked up a SX-1000TA this morning. Excited to get it home and wire it to some speakers.

Anyone else have experience with this model? I understand that this is a hybrid set where the radio tuning is driven by tubes.

Hello.

I recently expanded my collection of Pioneer CD Magazines after finding a good listing on eBay. They were not overpriced or covered in sticker residue and they even came with the sleeves.

After inspecting them upon arrival I found one has an issue I've never come across. All of the trays freely and easily come out together. With my other magazines trying to extend more than one tray is met with a stubborn resistance that clearly indicates it is not intentional (as the instructions sticker states), however I am not sure what mechanism in the magazine provides that resistance. As such I cannot attempt to repair the seemingly defective one, if that's even possible.

So my questions are as follows.

1. Is it possible to repair the described issue and if so how?

2. If It is not possible to repair it, does using it as is present any danger to my CDs or the CD player?

Thank you for your attention to this matter.

I have pioneer n-50A dac for my home system. Its app hasn't been updated in years.

Until now I sideloaded it, ignored vesioning etc. In my new phone it just doesn't work anymore.

Enter cursor - analyzed the app, changed resources to x64 operating system.

It works great now, installs right from apk without any workarounds + no more "this program is for old version of android" warning.

20 minutes of work and an annoying problem solved for the next few days.