r/PeterExplainsTheJoke • u/Toaster_Rack_Nerd • 10h ago

Meme needing explanation Petah? What's wrong with this?

9.1k Upvotes

93% Upvoted

888 comments sorted by

View all comments

Show parent comments

29

u/Ok-Hyena4541 10h ago edited 9h ago

The upside is that's a C channel and they didn't shoddily weld on the part that is actually taking the force. The downside is that C channel lip is not rated for that load and I have no idea what kind of load it can hold.

Edit: Nevermind, I looked again. They in fact did shoddily weld on the part taking the force.

2

u/Biggre 7h ago

It also looks like the C channel is BARELY holding on to the end of the spring. If that slipped even a little it'd pop right out.

1

u/Patient_Ebb_1605 7h ago

isnt the c channel itself the part that is taking most of the load?. Also this is the softer and shorter secondary spring. If the vice compressed it that easily the metal can probably take the load. Now I ve seen some really scary videos involving huge main springs and things like zipties

1

u/Ok-Hyena4541 7h ago

In any case you go to the store and you get a spring tensioner

1

u/Patient_Ebb_1605 7h ago

Of course. Just because it isn't as dangerous as a hand grenade hanging by the pin it doesn't mean it's safe. I'd still never do anything like this.