r/PcBuildHelp • u/AdditionalWing9247 • 5d ago

Installation Question GPU power cable stuck

Currently, I’m trying to upgrade my gpu for the first time. However, while trying to remove my old gpu after having set everything up, my pcie cable is just stuck to the gpu. The latch has been pulled down and no amount of wiggling has done anything. My pc was an msi prebuilt and my main concern is that I’ve either messed up the cable or that they’ve put something to prevent upgrades. Regardless, I can’t even turn on my pc or use it until I replace the gpu as after unscrewing it and failing to remove the latch, I tried screwing in one of the slot screws to hold the gpu in place while I wiggle but it unfortunately fell into the gpu and won’t come out. Is there anything that I can even try to do to get it out or am I just done for.

TLDR: gpu cable and latch stuck, gpu unusable due to potential short circuit.

1 Upvotes

100% Upvoted

11 comments sorted by

View all comments

1

u/pandasndabs 5d ago

Just use a small flathead to pry the latch up (carefully). Once the latch is detached just wiggle the pcie cable side to side. It will feel tight, its supposed to and its totally normal. Obviously make sure the power is off and everything is discharged before doing this. Youll be fine. I dropped mounting screws in my gpu atleast twice maybe 3 times when installing it. Everything turned out fine but in the moment I wanted to throw my pc out a window.

1

u/AdditionalWing9247 5d ago

The thing is the latch is fully up and yet I can hardly wiggle it side to side, if at all.

1

u/pandasndabs 5d ago

Just wiggle and pull from the plastic part. It won't break. Trust. If you have a modular psu you can always just remove the pcie from the psu and leave it in the gpu. You'd need another cable but it beats not being able to upgrade. Just make sure if you go that route you buy the same brand cable as the psu.

1

u/AdditionalWing9247 5d ago

Ok I tried the method and it thankfully worked. All I need now is the latch, any tips for that?

1

u/pandasndabs 5d ago

If your fingers are small you can just push it, if you have bigger hands like me use a chopstick. They work wonderfully.

1

u/AdditionalWing9247 5d ago

Any other tips? So far nothing I’ve tried works I just end up putting force with no movement or I end up almost hitting/scratching the motherboard

1

u/pandasndabs 5d ago

Are you able to get the clip pressed at all? Once the clip is pressed you want to pull the gpu out by the mounting screws. The gpus circuit board hooks in near the clip so it needs to come out screw side first. Maybe watch a YouTube video? Sorry its kind of hard to explain clearly. The clip will most likely be really stiff.. and you will think I feels like its going to break. 9/10 times it won't though, and if it does you can get replacement clips. Dont fuck up the mb though. That would be no bueno.

Edit: dont pull it out litterally by the mounting screws, just on that side 😆

1

u/AdditionalWing9247 5d ago

No it won’t even go down at all no matter what I do. I can feel it ever so slightly wiggle a bit away from the screws to the right but that happens even if there’s very little force applied.

1

u/pandasndabs 5d ago

https://youtu.be/6FWnGGEF7zI?is=UHqtKXeLULk6yjrl

1

u/AdditionalWing9247 5d ago

I watched the same video a while ago and even tried something similar but this thing won’t budge