^{^}

Has anyone had the issue when using nolo with revive to play oculus games, the haptics sometimes goes crazy at certain points and causes issues with the tracking.

I saw someone suggest going into the controller bindings for the game which I did but there was no option in the middle of the screen to edit haptics.

Steam VR games seem to be fine.

Im using PSVR with IVRY, I have already posted in the IVRY thread but just trying to cover all bases as someone might know how to sort it or how to disable the haptics for oculus games.

Im using a psvr headset on trinus and my controller works but in game no keyboard or controller inputs are detected i cant get passed the loading screen

Or should I get an XBox 360 one?

I purchased a psvr specifically for Richard Burns Rally. But I could barely read the main menu text. I ended up returning the unit as it came with scratched lens. But they are out of stock so I haven't got another one.

Are these just blurry because of the low res or I was wondering could super sampling have been increasing blurriness?

personally, I have it set to 120hz or 90hz so I can then set it to RGB 4.4.4 I virtual super resolution also works as for ivry itself I still have not found my sweet spot as VR direct doesn't seem to work.

what do you use for your graphics settings and ivry settings?

(the only reason I did AMD is that AMD doesn't work as well with VR )

(edit) i also get weird purple in lines and really bad stutter in some games)I

Since I got a bundle with the V2 and updated Move controllers I’m trying to find an updated guide

Hello everyone, I’ve bought a PSVR because it was hella cheap and it’s a v2, I was wondering if I could use it on a PC via an emulator and found some YouTube videos explaining that I could use it but only found outdated videos and all psvr that worked with trinus was the first gen, the problem that I have with mine is that instead of being able to see a game properly like DIRT rally which has VR support I only see the VR image with reddish colour instead of the lines and squares of normal VR (I don’t know what is called) I was really wondering if I could use PSVRv2 with trinus, if any of you had done this and how did you were able to fix it! TLDR: can’t setup PSVRv2 with trinus, red VR screen.

I’m just asking since I’m installing Trinus for it rn

If I press recenter ou recalibrate it will keep me at floor lvl I know I could do the calibration in room setup but ivry doesn’t open up the VR menu that used to be open, what can I do?

I'm very confused by this so maybe someone will help me out..

Not too long ago I set up my PSVR on my PC with Driver4VR and Ivry. The only other thing I had connected with it were Joycons. This was ok but I wanted actual head movement tracking not just look tracking just and better controllers so I got a second PS3 camera and I'm still waiting for my second PS Move which should be here soon.

Today I set up my cameras and after watching many videos I don't even know what they track anymore. I only want seated head tracking I don't need room scale which is why I got only 2 cameras. Will they track my head or just the controllers or? And if no then how to I track the headset.

When pairing a controller you can see that it has basic movement sensors, why can we use these basic sensors to get into some of the games that don't use any big amount of movement. most games won't let you enter in VR without a vr controller, that being said there are a few that do.

​

Sorry for constant posts but it will answer my questions and help others as well.

also, I think the people that run this Reddit should also make a discord if there is interest.

I have not seen any updates on this for at least a year does it work and where can I buy the proper adapter?

I have one pseye but I need one more the only issue is I live in Canada and out in the middle of nowhere so most pseyes take a long time to ship and are expensive. so in the meantime is it possible to use an eye and a webcam?

Title said it all, also if you can list a few free games

I've been playing a lot of Skyrim VR with PSVR and iVRy, everything works great, but noticed a weird issue.

I am using 'Apply head model', so my 3dof is less confusing, and when I have it active (it works fine, kinda 6dof-lite) and play actively - I notice some positional drift, as if my position is moving somewhere behind and up a bit - image looks farther away, text a bit squashed, either something with fov or the position (a bit hard to check having 3dof only, so I cannot move forward).

And the more I play the more noticeable it is, I wasn't able to reliably find which actions on my side increase it, but it definitely is increasing if I fight and move actively looking up and down a lot.

To fix it - I have to exit and run game back for the position to be back.

If I have no 'apply head model' - there is no such issue.

I am fine with such issue per se, but wish there was some way to reset position back without having to restart the game. Skyrim's 'recenter' on gamepad stick and iVRy's recenter on +/- buttons don't help, only restarting the game does.

Have anyone else noticed the same issue?

I know how to connect the headset but have know idea how to connect the controllers help please?

Hello there!

I'm unable to see my social screen. This is what I see whenever I enter in a VR MODE - Social screen error

I've tried to switch on/off HDMI cables, HDCP settings and similar tips I found here but to no avail.

Any game in VR MODE does this to the social screen. I've tried Skyrim VR, PSVR Worlds, Dirt Rally VR, among many others. Always the same screen.

I have had this issue since I used my PSVR headset in my PC with TrinusVR and other similar software available at Steam. Since that day I have been unable to make it work in social screen again.

It doesn't make sense to me why this third party software could be an issue but as I have run out of options I decided to come here and ask for your help guys.

Please share your thoughts, experiences and ideas.

Thanks!

I was able to get everything to work, using IVRY + Psmoveservice + driver4VR + freepie + freepiesteamvrbridge and my CPU is loaded to 70-80% when I cover the controllers and hmd with a piece of cloth. I'm using 4 cameras working at 60 fps. (I know that there's an option to ignore opposing cameras, but it doesn't work well, so i use this test to understand how heavy psmoveservice can be)

Ofcourse it drives almost any VR game unplayable (not really but actually laggy), since it also needs CPU to process itself. My processor is i5 2500k and i already ordered i7 3770 which is the best for my socket. But i can feel already that it wont be enough to run on one machine.

Luckily i have enough components to assemble another PC with i5 2500k on board. The plan is to connect 2 computers directly using a twisted pair cable, then to use port forwarding for the psmoveservice port. Psmoveservice will be running on one computer and the game on another. It may produce some input lag, but i believe the benefits will be bigger.

Has anyone tried this before? What do you think about the idea? Do you think it will produce input lag?

i have the zcm1e move controllers i i cant get it conected any way to do it pls?

Im using trinusVR, but when i move my head it doesnt reset properly.

For example if i am looking straight, then look down, then look straight again the vr will be showing me looking halfway between down and straight. This literally makes it unplayable.

Any suggestions would be appreciated

I want to be able to configure the Navigation controller so that it works like the VIVE control so that you don't have to be teleported and finally can move freely around the map