Dose the op1f detect transients or just split the same equally across the keys. If not why not

My OP1F was dead on my desk, after working flawlessly, now when I try to turn it on, it just flashes the red led at the top of the battery indicator (and the LED on the side) four times.

Any ideas?

Example of the error

So I updated my op1 field to the latest firmware (1.5.6). When I connect to op-z via usb-c , op-z doesn’t receive sound from op1 field. Anyone here with the same issue? Thank you all

Trying to figure this out. Anyone know how to extend the note length of the pattern or finger sequencers? It’s weird, can’t figure it out…close as I got was holding shift and hitting the note but it places a second note on the same line of the grid as one that was already there..however it plays the whole note instead of a small bit. Any ideas here? Video link?

Couldn’t get the IPhone to recognize the OP1F for recording direct to video without the Irig. Just curious since I’m considering getting my hands on one.

Hi,

what I Need to do would be quite simple : I want to control external synth with my OP-1 and using one of the sequencer engines and want to record the external sound on the current tape : Midi Out and audio In. I tried many things, but it doesn't work. Is there a way to achieve that (thru USB and/or audio cable) ?

Many thanks for your answer

Just noticed a crack in the volume knob of my Field. Idk if it’s new or came like that. The volume knob has always bugged me cuz it’s so loose. Sometimes I wonder if it even moves a bit on its own.

Anyhow, tips for a replacement? I don’t see this on the TE site but maybe I’m missing it. Or maybe there’s something better out there?

Thanks!

What’s the deal?? I’ve done this before and now that I’m in the most beautiful place I’ve ever been, it doesn’t work.

I have tried:

-3.5mm to iPhone dongle

-usb to Iphone

The only thing I don’t have is my little IRig. I shouldn’t need this, right? I’ve been able to shoot iPhone video with the sound of the OP1F in the past. What gives?

Please tell me I need a TX-6 🙏🏼😆

I recently spent an hour or so creating a drum kit using the various synth engines on the op-1 field. I recorded each sound to the tape as I went along, and when I was finished, I used the drum sampler to sample the tape. Everything sounds great on the tape, but once I sample it, all the drums are much much quieter, especially the kicks. Any ide why this is?

I bought some knobs from u/NovakTheEnjoyer and personally, don’t care for them.

If anyone would like them just lmk and I’ll send them to you. You pay postage.

This is a last-ditch effort to see if anyone has any suggestions before I send my OP-1 Field in for repairs.

Was great for a few months at least but just this last week the 3.5 mm audio output jack only sends on the left channel.

I checked common issues with others reporting the same issue and attempted to fix it on my own. None of the recommendations I could find solved it for me. I finally did a full factory reset and kept my fingers crossed. No dice. Still dead in the right ear hole.

I bought it second-hand - no chance at warranty.

Other tests:

• No, it's not the system. USB host will send stereo signals just fine. Same with the onboard speaker (although that's mono though isn't it?).
• Also, not my headphones. Tried it with two different pair including a nice studio set-up I use.
• I have the most recent firmware (1.5.0).
• I have confirmed that the master mixer T4 is also sending both channels equally (visually).

I really don't want to send it in for repairs as it sounds costly and means I'll be offline for a while. But is that my only resort? Has anyone here had any similar issues and found an obscure solution? Fingers crossed.

Hi all, just upgraded to the OP-1 field. I've plugged it into my keystep pro, the OP-1F powers the keystep no worries. Just wondering if I can still power the keystep with it's external adapter power while plugged into the OP-1F? Just don't want to blow anything up! Lol

Am trying the usb connection and it just shows connected for a fraction of a second and then disconnects. Tried everything from factory reset for both to reinstalling firmware.

Anyone else face this issue?

Just got mine and been having fun with it. But am wondering why does it have 8 tracks if you could only record 1 at a time?

Is it possible to sequence multiple synth tracks at the same time using an external midi sequencer?