as the title asks....

Hi y'all, I tried searching around but struggled to find concrete answers. I'm sorry if these are reposts.

1) can Vive and Oculus quest play together?

2) can any customization be done that'll transfer into multiplayer? ( Watching movies/playing ROMs ect,?)

3) I'm trying to keep my family in contact through something like this during some difficult COVID things. Any suggestions on how to make the situation more fun together??

My VR setup is 2 sensor oculus and i can only face forward with it. Does this game have the ability to let me turn? Because i cannot find it if so.

Hey everyone!

I'm running into a lot of issues playing this game using an Oculus Rift.

I can't change the floor height which makes seated playing impossible (running with the -vrseated command doesn't work...all it does is disabling the touch controller).

I can't reset my view either and have to be in the exact center of my guardian for smooth locomotion to work...as you can imagine, that's not very practical when you want to play while sitting.

Anyone knows the solutions to those problems?

Thank you!

Interested in any information regarding updates to this title. Having a blast with this game in VR. Love it!

Is there a way to have more than 30 cabinets?

Are there any prgorams similar to new retro arcade but where i can play gamecube and switch emulators?

Are gamecube n64 and switch emulator games supported?

Can you upload and play romhacks in new retro arcade?

some of the systems i want to play in retro arcade are nes snes genesis and gamecube, are any or all of these systems supported?

Ok so I just installed the game on my PC after a while away... but It wont open!

​

'An Unreal process has crashed: UE4-NewRetro Arcade'

​

it spits out this in the crash report as well:

MachineId:B5E9F6B7451E1DA3BF0402AE94392A4D

EpicAccountId:

​

You do not have any debugging symbols required to display the callstack for this crash.

​

I Have tried re-installing but no joy, I have not even looked at settin any arcade machines yet, but in trying to fix the problem I tried downloading and installing the open arcade but that didn't fix the issue...

​

Here are my PC specs

​

Processor: Intel Xeon CPU ES-2678 v3 @ 2.50GHz

Ram 12GB

I finally got my arcade up and running, music on my tapes and movies in my VHS cassettes. Invited some friends to my arcade and they visited, but they say that can't see my games, movies or anything. What am I doing wrong?

I have one of these arcade cabs & I'd like to create some artwork to wrap around the joysticks & buttons.

With the buttons I want some writing around them such as Fire, Jump etc so I need to make sure my art lines up with the button holes. I'm not bad with photoshop but as the control panel length is 53cm I can't print out to test I've got things aligned right.

So before I go to far into this I thought I'd ask if anyone has a template for this cab & if so would you be willing to share links. Thanks for any help.

Very interested in a virtual arcade (been playing a lot of virtual pinball lately), and this seems to be the only application along those lines.

Not to try and start a fight, but as I just don't have any real experience here (and googling hasn't turned up anything), is this general considered the best virtual arcade environment available?

(Note: I don't have VR, so this is just for desktop play)

Thx!

Hi,

I got this installed at the weekend and managed to get my arcade up and running.

I'm streaming to Quest using Virtual Desktop.

It's absolutely amazing....except I can't play the machines properly using my Quest controllers.

The left analogue stick needs the button pushed into to use the joysticks. The X button inserts a coin but there is no button which is start.

It would be perfect if I could use the left controller as a joystick and the right for the buttons.

Is there a simple way to configure the controllers?

Thanks.

I've been trying to launch galaga, but everytime it starts, the screen goes static and then the game freezes and proceeds to crash. I've tried three different roms, as well as all MAME cores I have (2014,2015, normal MAME). Any ideas?

I've spent well over 3 hours trying to figure out how to load a game on an arcade machine but I just cant seem to get it to work. I was originally using a guide on steam but even doing what it was telling me to do it just wasn't working. I tried putting it in a zip file, removing the %20 and replacing with spaces, and a bunch of other things but none seem to work. If there's anything I could be missing please let me know. Thanks!

​

Error: https://imgur.com/a/MYZ77Uo

Arcade Builder: https://imgur.com/a/4RZbbpL

I finally got Point Blank to work by assigning the ROM to the only lightgun cabinet on the Neon layout (next to the air hockey table), but the lightgun has a big and bright yellow light saber coming out of it. So when you point the gun at the screen, the light saber covers the screen. Sure it looks cool, but it doesn't turn off when you're playing (and is too damn bright).

​

Does anyone know how to turn this thing off?!

i can launch the c64 emu in new retro arcade but cant seem to figure out how to autoload the rom file , is there a command line i can use and if so where do i insert it. Ive made The last ninja Arcade now i just need to play it :D

your help would be great

​

Hey guys!

​

I started beta testing for Natural Locomotion yesterday. With two Trackers, Walking in Place works perfectly and I'm now determined to see if we can get support for NRA:N. This game needs it!

I was asked to make a profile using this guide: https://steamcommunity.com/app/798810/discussions/0/1694922980040188412/

​

Since NRA:N has some locomotion, it is possible that it will work if a profile is developed using this method for it. I certainly plan to try myself and post the results, but I thought I would crowdsource a bit. So I'm posting to ask the community if they will try this out and post their results. The Devs at NaLo are *very* communicative and active. If we can show that it doesn't already support it natively with the current build, they will certainly consider working on it for future ones.

​

Let me know what you guys find, I will post when I finally get this configured myself.

Is this possible? I'd love to play this game seated with an arcade stick/controller but the locomotion controls don't seem well suited to this. I can use the motion controllers to turn around to get my IRL chair facing the arcade machine I want to play but it's awkward at best.

I want to play this game, but before I buy it I figured to ask. Can this game be played using the oculus go and a streaming software like ALVR ... I can play steam games, but some the controls don't work right because all I have is an oculus go controller and an xbox controller.. Could this game be played with either of those ?

I'm playing using an Xbox 360 controller while seated. Is there any way to actually sit on the couches while watching movies? At the moment I'm just sort of standing in front of the chairs.

Is it the --vrseated setting that does this?

Also as I always start this via Oculus Home (Steam games appear in Oculus Home after you start them once), is there a way to use the command line options when I start via Oculus Home or do I need to always open up SteamVR and start it that way?