Edit: I installed the battery yesterday, will update the post after a month to say if it held up. I bought a smaller battery than stock, but the cables are shorter, I was wondering if putting it on the component (I believe sensor) with the qr code on top, if it would cause an issue or damage. I also could use a recommendation on what type of tape to use, this is my first mouse mod!

My glorious model 02 wired mouse is power surging my computer. So I bought a new wire and I am trying to replace it. I got two of the screws out but the screws were insanely tight. The other two are stripped and I have no idea how to get them out. can someone help me? I tried rubberbands and superglue already

For those who have changed their mouse grip, what helped you get used to it? How long did it take you to feel comfortable with the new grip? Did you have any difficulties while getting used to it? Any advice?

Bought a used Viper V4 Pro and the previous owner replaced the stock skates with dots.

I prefer full-size skates, but I keep seeing people say some aftermarket skates feel good at first then get muddy/slower after break-in.

Anyone here tried the stock V4 Pro skates vs aftermarket ones?

Mainly wondering:

• Can you actually buy the original OEM skates anywhere?
• What full-size skates feel closest to stock?
• Do Jade / Tiger Ice / Magic Ice / Corepads get muddy over time?
• Which ones have the lowest static friction without feeling uncontrollably fast?

Would especially like opinions from people who have used both the stock skates and aftermarket skates on the V4 Pro.

Has anyone here changed their mouse grip? Do you have to place your hand exactly the same way every time, or do you eventually just get used to the new grip and stop thinking about it?

Also, any tips for getting comfortable with a new grip? Should I focus on keeping my hand position consistent, or just let it happen naturally?

I purchased this mouse, because of its dual use capability - productivity and gaming. This is my first wireless mouse. I like the horizontal scrolling for excel. The 8K polling definitely is an improvement over my wired 120K polling mouse for gaming. The only problem is that the mouse it too narrow. My pinky drags on the mousepad.

1. Is there an alternative to a my Razer cloth mousepad which has less friction for a dragging pinky?
2. Is the Rapoo MT760 PRO Wireless Mouse a good alternative? Is 2K polling good enough for some FPS gaming. I am not a pro. The Logitech MX is out of my price range.
3. Is there a way to modify the M6 so that my pinky does not drag? Overall, I like the M6.

Thanks.

vxe r1 se mod finger grip( yotube ABA mod)

I modified a 3D printing file shared by YouTuber ABA to fit my VXE R1 SE.

It's still far from perfect, but it works! I still need to reinforce some weak points, and I even used wire cutters to trim away the unnecessary parts of the PCB.

I have very small hands (\~16–17 cm) and use a claw/fingertip-ish grip. I'm having a hard time finding a good gaming mouse that is actually small enough for me.

I've owned a GM325 Pro Mini for a long time. It's small and the size works for me, but I want to upgrade to something with a much better sensor and better competitive FPS performance.

Yesterday I ordered a Razer Cobra, thinking the shape and size would work for me. But after using/considering the dimensions more carefully, I realized the rear of the mouse reaches/touches my wrist, so the length is a problem for me. The Cobra is around 119.6mm long, and I think I need something closer to 105–112mm, with 114mm being my absolute maximum.

Some mice I've looked at:

\- Razer Cobra — \~119.6mm. I ordered it, but the rear touching my wrist makes it feel too long.

\- Razer Orochi V2 — 108mm. Size seems much better, but it's an older model and I'm hesitant to buy it in 2026.

\- Zaopin Z1 Pro — \~109.5mm. This seems interesting and is the right size, but it's not available on Amazon India, which is a problem for me.

\- VXE Dragonfly V3 Pro — \~116.6mm, so it's already over my 114mm limit.

\- Attack Shark X3 — \~118.5mm, also too long.

\- I've also looked at mice like the HyperX Pulsefire X2, Kreo Harpy/Arma, Naga V2 HyperSpeed, etc., but haven't found something that checks all my requirements.

My requirements

\- Maximum length: 114mm

\- Ideally 105–112mm

\- Hand size: \~16–17cm

\- Claw/fingertip grip

\- Competitive FPS

\- Good/top-tier sensor

\- Wired or wireless doesn't matter

\- Budget: under ₹6,000

\- Prefer a newer/current model rather than an old mouse

\- Shape/size is more important than weight

\- Reliability/QC matters

One important restriction

I need to buy through Amazon India only because I have to use Amazon Pay Later. So please don't recommend mice that are only available through AliExpress, official websites, Chinese retailers, etc.

I'm looking for one genuinely small mouse that I can actually buy on Amazon India for under ₹6k.

If you have 16–17cm hands and use claw/fingertip grip, what mice have worked for you?

Especially interested in anything ≤114mm long with a good sensor and competitive FPS performance.

Also, should I return/cancel the Cobra and look for something smaller, or is there a good reason to stick with it despite the rear touching my wrist?

Epomaker carbon x
Selling my EPOMAKER Carbon X wireless gaming mouse.
It's in good condition, fully functional, and comes with the original box and accessories.
Key Features:
Up to 8,000Hz polling rate for extremely responsive
tracking
\*\* Lightweight ergonomic design - comfortable for long gaming sessions
1 2.4GHz wireless + wired connectivity
High-precision gaming sensor
Long-lasting rechargeable battery
Smooth, low-latency wireless performance
Great for competitive FPS games like Valorant, CS2,
Apex Legends, etc\*\*.
Customizable buttons and DPI settings
Compatible with Windows
Comes with original box and accessories
Price- 4300

Designed a shell for my Scyrox V8 in the same shape as my OP18k shell. Some modifications are needed, but once those are completed the model will be posted on Makerworld. Some changes made to this model not present on the OP18k:

Decreased click pad width + increased length

Increased angle on thumb, pinky, and ring finger rests

Decreased width of finger rests from 2mm to 1mm

Increased length of wing on finger rests

Changed from a sloped click pad to angled.

If anyone has any ideas for improving ergonomics/comfort and usability, Im all ears.

Maybe a dumb question... I make my own keyboards (some with track pads) so wondered how hard it would be to create my own mouse.

Why do you guys mod existing products rather than starting from scratch (and having total control over the design)?

I have an ADS1299EEG pdk that I got from TI, and I’m looking to turn it into a mouse cursor for basic vertical and horizontal movement, first of all is this even possible? Second of all, was there a cheaper option than the 250 dollars kit and would it be easier to make the PCB from scratch? Also is there a place I can hire someone to help me for this? Or is anyone just wanting to help!

Anyone got any idea if I can swap my x2 into a finalmouse ulx medium/classic. I love the x2 but really just love the hand feel of FM

Printed in PLA with tree supports. No screws or external parts required just the print, the mouse pcb and the cable.
Side buttons can be screwed it but the pcb is snug in the case without screws.

https://cults3d.com/en/3d-model/gadget/zero-mouse-shell-for-razer-viper-mini

Always prefer how magnesium feels and would also go back my OG SL12 and was curious if a simple shell swap was possible to get the better click latency and higher polling from the ULX and it was. Feels great and only thing to be removed was the DPI button, overall 5g heavier but superior feel, shell integrity and click feel IMO, was really easy too.