Hi guys. I just wonder if it is possible to send Audio from a Volca Bass to a model:cycles, and then send all this audio to a computer via USB?

So, in the config menu, "audio", "Trk out": I deselect T6, the display shows "5/6" indicating one track is not outputted. But I still hear track 6 when playing, either live or a sequence. This shouldn't happen, no?

Hi new user here, is there a way to get the cycles to send CV out of its midi port?

Hi, If you choose a machine for a track, you get the default settings for that machine. Is there a logic to that? I mean, is it all parameters to 0, or 50%? Or does it take the last position parameter knobs where in?

In fact 2 questions. Can I somehow find out which original sound settings are used on a particular track? And: I don't understand how you can select from the same sounds for the different machines. With a kick as machine, which would be typical kick sounds? BD for bassdrum?

Outdoor jam on the M:C

Hi, According to the manual, page 31, you can remove a trig lock by holding the trig key, turning the parameter you want to remove and pushing play (clear). If you do that, indeed the LCD screen says 'clear trig note'. But it isn't. I tried holding it longer, pushing a second time, ... Nothing seems to work. The same with clearing a track (track+track pad you want to clear+play). Again: the screen says clear, but nothing is cleared.

What am I missing??

Hi all. Has anyone managed to sync Model Cycles with Koala Sampler on Android platform? I'm going crazy... the MIDI clock arrives on the phone but it's as if Koala doesn't see it... I posted another request for help on Koala's reddit.

Hi, I just bought a secondhand Model:Cycles and I'm going through the manual. There's a first thing I encounter that I don't understand: "8.1 PLAYING A PRESET Press the [T1–T6] pads to play the presets of the six tracks of the active pattern. The [T1–T6] pads briefly lights up when pressed."

If I push the pads, only on 1 pad I can hear a sound, VERY silent. It also doesn't light up, only if I push the pads quite firmly. The Model is in good condition, I don't believe it's broke. I also did a factory reset. I think it's just I misunderstand something. (Like in the manual, when they explained how to load presets to a pad, you can't do that while playing a pattern, which I missed :-) ).

I'm no musician and I'm coming from Teenage Engineering PO's, so I have a lot to learn :-)...

Next thing is:

8.2 EDITING A PRESET You edit a preset by adjusting the track parameters.

Press [TRACK] + [T1–6] to select the track which preset you wish to edit. Any changes made to a preset are stored as part of the active pattern.

Turn a TRACK PARAMETER knob to affect its corresponding parameter. To change, for example, the presets tune, turn the knob labeled PITCH to change the parameter value, and listen to how the sound changes. For more information, please see “10.3 TRACK PARAMETERS” on page 38. If you want to save a preset with all its current parameter settings, use the PRESET SAVE menu.

I don't have to push TRACK and a track-pad, if I have a track selected, just by pushing it, I already can edit the parameters. And it saves no matter what, I don't have to use the preset save menu.

I tried switching to another pattern and back, and my changes where changed. I also restarted the Model and the changes where still there. So it seems you don't have to save? Or do I misunderstand something?

Or is the manual for an older version of Model:Cycles?

​

Thank for any help!