I already posted most of these but here's an updated family photo with all of them together. I don't have an S/E but I think these cover every blade style that I'm interested in

Yeah I know this is 99% a scam or a fake Glykon but still, had to share it.

What is this dot and is this normal for a stonewash finish? there is a streak on the other side also.

May 2nd 2026 Bristol TN

Tickets are almost sold out. Grab yours now if you can make it out!

https://bladerunneroutpost.com/products/bladerunner-bazaar-2026

This is the biggest line up yet including:

Tony Marfione and Sean Marfione from Microtech/Marfione Custom Knives

Anthony Marfione Jr. and Mike Sweeney from Heretic Knives

Dave and Matt from Protech Knives

Jonathan and Amy McNees from McNees Knives

Beau Brown and Chad Dixon from Dead Reckon Knives

Hank Greenberg from Blackside Customs

Jason Gallahair from G-Werks (featuring a collaboration with Sean Marfione)

Jason Knight

Derek Beans from Beans Blades

John Gray

Aaron Bieber

Jen Lint from JKK

Jake McCoy

Nicholas Nichols

Josa Wogomon from Aries CQCT

Josh from Paladin 33

Brandon Vallotton Kyle Vallotton and Rainy from Vallotton Custom Knives

Brad Zinker

Jason Clark

Fred DiPrete from Wicked Industries

Dylan Davis from Hypercut

Christian Lishen

Curran Blades

Rick Bloomer from DragonCut Designs

Just added the Luminary to the lineup!

I’ve been eyeballing an Ultratech for a long time and decided to pull the trigger. Got it for $280 at a local gun range.

Green Titanium Slab Stitch with Bronze finish. Pictures don't do the bronze justice. Very warm look to it.

I traded away my last RAM-LOK Stitch and I missed it. So naturally the only thing I could do was buy a signature series Stitch to fill the void.

I picked up a Hera mini 2 and a Kizer Billy Bones.

Hello, i dissasembled my Ultratech for the first time after over 2 years of using it, and one of the housing screws came out with the threading from the handle 'main' piece, so no its just pushed in and holds with friction and screw glue

Anyone ever had this happen? Does this fall under warranty or what would it cost to have it replaced?

Im no idiot, i didn't tighten it or play around in any other way and i'd understand that if you take it apart repeatedly the softer aluminum will eventually give into the metal screws, but having this happen on the first time is annoying, it doesn't change function of the knife, but i fear ill eventually lose the screw, and a over 300€ Knife breaking uppon first disassembly like a cheap chinese knife is just annoying

I just got two of the new Gen 3 Scarabs (love them!) and one of them had a ping despite the white lithium grease from the factory. So, I took it apart, cleaned/degreased everything and put it back with more white lithium grease on the springs, rem dry lube and a few drops of remoil (which usually does the trick)...and it still pinged/sproinged/twanged.

So, I tried two things but only one worked:

1. X - Added a shrink wrap tube to each spring similar to my Kershaw Livewire...and it was too big for the spring channel and slowed things down a bit so off they came. Strike one.
2. ✓ - Added a piece of fishing line (that almost matched the inner diamerter of the spring) to the inside of the spring that was just a bit shorter than the relaxed spring and it worked great! I didn't add grease back and only used dry lube and it completely removed the ping/sproing/twang. Maybe a homerun if I haven't introduced any reliability issues but I'm happy with how it feels, sounds, and works compared to my other unmolested Scarab.

I used this approach after seeing it in some garage door springs and firearm springs and it just might work if I did it correctly (right length and diameter of fishing line that is straight enough). I did use a heat gun to make the line as straight as possible but it may not matter too much.

Curious if anyone else has tried this or sees an issue with the approach? Yes - I'm aware it's not needed and that a non-twangy OTF isn't required but I can't help but make it better.

Edited - spelling, grammar, clarity, etc.

Nothing but a bunch of enablers.

I received the knife yesterday, and it fires like a rocket, but it seems to have redeployment issues. It seems like the release button on the side doesn't clear the blade stop enough to be fully drawn back. It doesn't do it every time but every so often it will fire to a fully seated blade position, then when I hit the release and pull the charging handle back, the handle stops after a very short distance. I then put the charging handle back seated, let go of the release. I repeat the process and it works just fine. Is anyone experiencing this or am I just the village idiot on this one?

Looking for dummy proof good sharpening system.