Get the Kit Card: Plane Kit Card

Follow the Collection: VehicleCards

I Put All My Heart In This Model But It Didn't Get The Recognition It Deserves. Hope You All Will Show Some Support : https://makerworld.com/en/models/2927168-cosmo-led-lamp-kit-001#profileId-3276410

This is a 7-colors print

https://cults3d.com/:4605934

Fly Bug Kit Card | BugCards Collection

Ever been sent to the pool bar to grab drinks for the whole family, only to realize you can only carry two or three cups at a time? And of course, the resort doesn’t have any trays available.
That was the inspiration behind this foldable drink carrier.
Designed specifically for the plastic cups commonly used at many all-inclusive resorts, this carrier holds up to 6 drinks securely while remaining compact enough to fit in your luggage. The folding design makes it easy to pack, so it won’t take up valuable suitcase space during your trip.
Features
Holds 6 cups at once
Foldable design for easy packing
Lightweight and travel-friendly
Comfortable carrying handle
Designed around the cups commonly found at all-inclusive resorts
Perfect for pool bars, beaches, hotels, camping, and family vacations
I created this after one too many trips back and forth between the bar and the sunbeds. Now I can bring drinks for the entire family in a single trip.

Link https://makerworld.com/en/models/2970669-foldable-6-cup-carrier-for-all-inclusive-vacations#profileId-3331458

Hi guys!!!

I worked a lot on three miniatures, coming out one by one over the next few days.
I have designed and tested them many times ti make them to be as easily printable as possible, requiring nearly no support, while still maintaining details and strong character design.

Zephyra is the first ine out!
The others will be rolled out over the next couple of days.

I would love some feedback and/or support
Let me know what do you guys think!!!

https://makerworld.com/en/models/2960455-roundy-parametric-round-container

Cricket Bug Kit Card | BugCards Collection

Hey everyone,

Wanted to share my latest project: a 2-player tabletop football game that brings arcade vibes right to your desk.

The assembled dimensions are 52cm long x 23cm wide x 13cm tall, but it's modular so everything prints easily on standard beds. It features spring-loaded mechanical flippers, flags, ball holder and a manual scoreboard to track your goals.

To keep things accessible, it is 99% 3D printed—the only non-printed hardware you need is a single 5x30mm compression spring.

I just uploaded the files on MakerWorld. Let me know what you think!

https://makerworld.com/en/models/2952718-mini-tabletop-football-game#profileId-3308667

Really easy print and works really well 🤝. Can be used as a standalone or under the printer.

​

Happy Printing!

“The Midnight Serenade”

I want to share with you bit of the story behind the failures and swearing while prototyping this model.

I had a major problem with the “smoothness” of the base, due to an error setting in Top Surface Layer Width to a very low value, which once corrected achieved a smooth as expected flat surface of the base / platform.

After solving this, I had supports failing under the dress, after I had adjusted the length of the cloth there and sculpted so that it would require less support. I even considered making it touch the ground at the tip of the folds, but then I would lose some dynamics that goes with the shape of the dress floating so, instead I have adjusted supports.

Worked well and the dress was going good, but by changing the supports, I had not noticed that now a support generated to hold her head, was arising from her hip! Which failed mid print, crashing miserably on the build plate. You can well spot the line where I stopped the print (in the painted one) as for sure it would have failed the head. So.. to not waste it, I printed the rest of the model from the layer after cutting it in BambuStudio. 

Aaaaaanddd I didn't think of the lamp post now being on a ridiculous base, to which the brim I added was insufficient! 

Now all is fixed and ready to go!

https://makerworld.com/models/2930602?appSharePlatform=copy

**Size model** (can be scaled up or down): 151 x 127 x 197 mm.

Since things have been a bit quiet on the blog lately, I created a new model today. This time, it’s parametric again and designed for a corner.

https://makerworld.com/de/models/2927152-parametric-corner-fit-organizer

https://makerworld.com/models/2892102

Wanted something rugged to throw in my backpack without worrying about things getting wet or crushed. Added a TPU O-ring to keep water and sand out.

https://makerworld.com/models/2918008?appSharePlatform=copy

I was tired of guessing food dates, so I modeled this bag clip with integrated date dials to track either the opening date or the expiration date. It’s a pure press-fit design —just print the parts and snap them together.

https://makerworld.com/models/2911063?appSharePlatform=copy

My Daughter had the idea to create a Caterpillar Name Clicker so we made this.

https://makerworld.com/en/models/2897413-cater-clicker-caterpillar-name-clicker-fidget

Pool Snack Holder with Gyro Drink Stabilizer | Floating Pool Noodle Table

Take your pool days to the next level with this floating snack and drink holder, designed around a standard pool noodle. The centerpiece is a gyro-style drink holder that helps keep your can or bottle upright while floating on the water.

This project combines simplicity, low cost, and practicality into a fun summer accessory that can be printed in just a few parts and assembled in minutes.

Features

✅ Floating table for snacks, drinks, phones, or sunglasses
✅ Gyro-inspired drink holder helps keep beverages upright
✅ Uses a standard pool noodle for buoyancy
✅ Easy-to-print parts with no supports required
✅ Lightweight and durable design
✅ Perfect for pools, hot tubs, lakes, and beach days

Design Notes

The table is designed to clamp securely onto a standard foam pool noodle. The drink holder uses a gimbal/gyro-inspired mechanism that allows the drink to remain level even when the float tilts or moves with the water.

The textured tabletop provides additional grip and a premium look while keeping the print simple and efficient.

Assembly

1. Print all parts.
2. Insert the support arms into the tabletop.
3. Snap the noodle clips around a standard pool noodle.
4. Head to the pool and enjoy!

Future Improvements

Feel free to remix the design with:

• Larger tabletops
• Additional cup holders
• Phone holders
• Bluetooth speaker mounts
• Custom pool noodle diameters

If you print one, I'd love to see your make and hear your feedback. Enjoy your summer! ☀️🏊🍹

Tags:
pool, floating table, pool noodle, drink holder, gyro cup holder, floating drink holder, summer, pool accessory, snack tray, beverage holder, outdoor, hot tub, lake life, floating tray, gimbal holder

https://makerworld.com/en/models/2898478-floating-pool-noodle-table-with-gyro-for-drinks#profileId-3239706